The PIC16F628 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer electronics. This microcontroller is designed for low voltage programming and offers a variety of features that enhance its versatility and performance.

Discover the Mini White Push Button, a tactile micro switch perfect for various electronic projects in Bangladesh. Available in two sizes (6x6x4.3mm and 6x6x5mm), it features DIP mounting for easy installation and reliable performance.

The MQ-4 Gas Sensor Module is designed to detect natural gas and methane, operating at a voltage of 5V. This module is ideal for environmental monitoring and safety systems. Key features include:

• Sensor Type: Semiconductor
• Operating Voltage: VCC - 5V±0.1
• Digital Output (DO): TTL 0 and 1 (0.1 and 5V)
• Analog Output (AO): 0.1-0.3V (relative to pollution), max 4V at high concentration
• Gas Detection: Natural gas/Methane
• Detection Concentration: 200-10000ppm
• Interfaces: 1 TTL input (HSW), 1 TTL output (ALR)
• Heater Consumption: <750mw
• Operating Temperature: 14 to 122°F (-10 to 50°C)
• Humidity: <95% RH
• Sensing Resistance: 10KΩ-60KΩ (1000ppm CH4)
• Load Resistance: 20KΩ
• Preheat Time: Over 24 hours
• Encapsulation: Bakelite, Metal cap

The PIC18F4550 is an ideal microcontroller for low power (nanoWatt) and connectivity applications. It features three serial ports: FS-USB (12Mbit/s), I²C™, and SPI™ (up to 10 Mbit/s), along with an asynchronous (LIN capable) serial port (EUSART). With large amounts of RAM for buffering and enhanced Flash program memory, this microcontroller is perfect for embedded control and monitoring applications that require periodic connection with a personal computer via USB for data upload/download and firmware updates.

Discover the Arduino Nano ATmega328p, a powerful microcontroller board designed for a variety of electronic projects in Bangladesh. Featuring the Atmel ATmega328 microcontroller, it operates at 5V with a recommended input voltage of 7-12V. With 14 digital I/O pins and 8 analog input pins, it offers versatile connectivity and performance for your DIY electronics.

The Arduino Uno R3 is a versatile and powerful microcontroller board based on the ATmega328P. It is designed for a wide range of applications, from simple projects to complex systems. This board is perfect for beginners and experienced developers alike, offering a robust platform for prototyping and development.

Discover the SD Card Reader Module for Arduino, designed for simple operation and wide compatibility. This module supports standard WAV files and external SD card expansion, making it ideal for various audio and data projects in Bangladesh.

The 5 Watt 10 Ohm Ceramic Cement High Power Resistor is a reliable and durable component designed for various electronic applications. Featuring a 5% tolerance and easy mounting, this resistor ensures precise performance and long life. RoHS compliant.

Key Features:

• Standard Type with Excellent Ratings
• Long Life
• Easy Mounting
• RoHS Compliant
• Color: White
• Resistor Size: 22x9x5mm
• Lead Diameter: 0.7mm
• Resistance Value: 10Ω
• Power Rating: 5W
• Material: Organic solid (Cement)
• Resistance Tolerance: ± 5%

• Wide operating voltage range of 4.5-30V DC for versatile use.
• IP68 protection rating ensures resistance to dust and water, allowing for reliable outdoor use.
• High accuracy with ±3% FS depending on the parameter being measured.
• RS485 communication protocol (Modbus) for long-distance data transmission and integration with other systems.

The TEC1-12706 is a thermoelectric cooler (Peltier) module designed for efficient cooling and heating applications. It features a compact size of 40x40mm, operates with a maximum current of 7A and a maximum voltage of 15.4V, and can achieve a maximum temperature difference of 69°C. This module is ideal for various thermal management applications.

The PIC12F675 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® MCU architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer entry-level products. This microcontroller is designed for field re-programmability, offering flexibility and convenience.

The PIC16F84A is a powerful and easy-to-program CMOS Flash/EEPROM-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, low power remote sensors, electronic locks, and security applications. This microcontroller is designed for both prototyping and production, with the ability to update the end application without removing the device via In-Circuit Serial Programming (ICSP).

The Digital Clamp Meter DT200 is a versatile and multifunctional tool for measuring electrical parameters with high accuracy. Equipped with a 3 1/2 digits LCD display, data-hold function, and low battery indication, this clamp meter is essential for any toolkit. Key specifications include:

• Max. Reading: 1999
• Data-hold function
• Low battery indication
• Audible continuity
• DC Voltage: 600V ±(0.8%+1dgt)
• AC Voltage: 600V ±(0.5%+1dgt)
• AC Current: 20A-200A ±(2.0%+5dgt)
• Resistance Test: 20KΩ ±(1.0%+2dgt)
• Continuity Test
• Diode Test
• Power Supply: 1.5V*2
• Max Display: 1999
• Weight: 310g (including battery)
• Dimensions: 193L×63W×37Hmm

The MQ-7 Carbon Monoxide Gas Sensor Module is designed to detect CO gas with high accuracy. Operating at 5V DC, this sensor can detect concentrations ranging from 100 to 10000ppm. It provides both analog and TTL output signals, making it versatile for various applications.

Key Features:

• Main Chip: MQ-7 gas sensor
• Working Voltage: 5V DC
• Detection Range: 100 to 10000ppm
• TTL Output: Valid signal is low
• Analog Output: Provides variable voltage based on gas concentration

Discover the Arduino Uno R3 with SMD Atmega328 IC, a versatile microcontroller board designed for various electronic projects in Bangladesh. Operating at 5V with a recommended input voltage of 7-12V, it features 14 digital I/O pins, 6 PWM outputs, and 6 analog inputs, making it perfect for DIY electronics and prototyping.

Key Features:

• Operating voltage: 12V DC
• Durable and efficient design
• Suitable for various applications including aquariums, water features, and solar water systems
• Compact and easy to install