The Arduino Uno R3 is a versatile and powerful microcontroller board based on the ATmega328P. It is designed for a wide range of applications, from simple projects to complex systems. This board is perfect for beginners and experienced developers alike, offering a robust platform for prototyping and development.

The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

• Wide operating voltage range of 4.5-30V DC for versatile use.
• IP68 protection rating ensures resistance to dust and water, allowing for reliable outdoor use.
• High accuracy with ±3% FS depending on the parameter being measured.
• RS485 communication protocol (Modbus) for long-distance data transmission and integration with other systems.

The AT89S51 is a low-power, high-performance CMOS 8-bit microcontroller from Atmel’s 8051 family. This microcontroller is designed for a wide range of applications, offering robust performance and flexibility. It features 4KB of Flash programmable and erasable read-only memory (PEROM) and 128 bytes of RAM, making it suitable for various embedded systems.

Discover the LDR Photoresistor Large 10mm GL10516, a highly sensitive light-dependent resistor ideal for various electronic applications in Bangladesh. With a diameter of 10mm, it features a maximum voltage of 250 VDC and an operating temperature range of -30˚C to +70˚C. Perfect for projects requiring precise light detection.

The PIC16F84A is a powerful and easy-to-program CMOS Flash/EEPROM-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, low power remote sensors, electronic locks, and security applications. This microcontroller is designed for both prototyping and production, with the ability to update the end application without removing the device via In-Circuit Serial Programming (ICSP).

Discover the 50Kg Resistance Train Half-Bridge Weight Sensor by Keyestudio, perfect for various electronic weighing devices in Bangladesh. This set includes four sensors, each with a total rated load of 50Kg, ideal for hopper scales, platform scales, and more.

The Mini Air Pump is a compact and efficient device designed for a variety of applications. It offers reliable performance in a small, easy-to-use package, making it perfect for inflating items quickly and conveniently.

• Compact and lightweight design
• Powerful inflation capabilities
• Easy to use and portable
• Suitable for inflating tires, sports equipment, and more
• Durable construction for long-lasting use

The TEC1-12706 is a thermoelectric cooler (Peltier) module designed for efficient cooling and heating applications. It features a compact size of 40x40mm, operates with a maximum current of 7A and a maximum voltage of 15.4V, and can achieve a maximum temperature difference of 69°C. This module is ideal for various thermal management applications.

The MQ-7 Carbon Monoxide Gas Sensor Module is designed to detect CO gas with high accuracy. Operating at 5V DC, this sensor can detect concentrations ranging from 100 to 10000ppm. It provides both analog and TTL output signals, making it versatile for various applications.

Key Features:

• Main Chip: MQ-7 gas sensor
• Working Voltage: 5V DC
• Detection Range: 100 to 10000ppm
• TTL Output: Valid signal is low
• Analog Output: Provides variable voltage based on gas concentration

DC 12-24V 60W High Pressure Micro Diaphragm Water Pump

Ensure efficient water flow with the DC 12-24V 60W High Pressure Micro Diaphragm Water Pump. Designed for various applications, this durable pump provides a high flow rate and reliable performance.

• Rated Pressure: 0.8Mpa
• Maximum Flow: 5L/min
• Suction Distance: 2m
• Lift: 80m
• Range: 8m
• Voltage: 12V-24V
• Power: 60W
• Material: Plastic
• Intake Pressure: 0.2Mpa
• Weight: 7.1g

Package Includes: 1x DC 12-24V 60W High Pressure Micro Diaphragm Water Pump

Discover the Servo Motor SG90, a compact and lightweight motor ideal for various applications requiring precise control and reliable performance. Operating at 3.0V to 7.2V, this servo motor is perfect for robotics, automation, and DIY projects in Bangladesh.

Discover the Arduino Uno R3 with SMD Atmega328 IC, a versatile microcontroller board designed for various electronic projects in Bangladesh. Operating at 5V with a recommended input voltage of 7-12V, it features 14 digital I/O pins, 6 PWM outputs, and 6 analog inputs, making it perfect for DIY electronics and prototyping.

The ATmega128A is a high-performance, low-power 8-bit AVR RISC-based microcontroller from Microchip. It combines a wide range of features, making it suitable for various embedded applications. Here are the key specifications and features:

LCD Blue Display 16x1 - 1601 Module with white backlight is perfect for Arduino projects and other microcontroller applications. This single-line display features clear white text on a blue background, making it easy to read.

• Model: 1601
• Display Size: 16x1 characters
• Backlight: White
• Interface: I2C
• Input Voltage: 5V

Great for adding visual output to your projects!

The MQ-4 Gas Sensor Module is designed to detect natural gas and methane, operating at a voltage of 5V. This module is ideal for environmental monitoring and safety systems. Key features include:

• Sensor Type: Semiconductor
• Operating Voltage: VCC - 5V±0.1
• Digital Output (DO): TTL 0 and 1 (0.1 and 5V)
• Analog Output (AO): 0.1-0.3V (relative to pollution), max 4V at high concentration
• Gas Detection: Natural gas/Methane
• Detection Concentration: 200-10000ppm
• Interfaces: 1 TTL input (HSW), 1 TTL output (ALR)
• Heater Consumption: <750mw
• Operating Temperature: 14 to 122°F (-10 to 50°C)
• Humidity: <95% RH
• Sensing Resistance: 10KΩ-60KΩ (1000ppm CH4)
• Load Resistance: 20KΩ
• Preheat Time: Over 24 hours
• Encapsulation: Bakelite, Metal cap