Key Features:

• Max flow rate: 10L/min (600L/H, 160GPH)
• Max lift height: 16ft (5m)
• Noise level: <40dB (typically 38dB)
• Power consumption: 8W
• Rated voltage: 12V DC
• Rated current: 1.1A
• Overall size: Approximately 80 x 48 x 6mm (3.15 x 1.89 x 2.48 inches)
• Inlet diameter: 16mm (Outer), 12mm (Inner)
• Outlet diameter: 12mm (Outer), 6.9mm (Inner)
• Inlet/Outlet: 1/2 inch male thread
• Power supply: Solar panel, DC electric source, battery
• Max working temperature: 50°C (122°F)
• Fluids: Water, oil, gasoline, acid and alkali solutions
• Waterproof level: IP68
• Driving method: Brushless, Permanent Magnetic
• Life span: More than 30,000 hours
• Pump material: ABS

• Wide operating voltage range of 4.5-30V DC for versatile use.
• IP68 protection rating ensures resistance to dust and water, allowing for reliable outdoor use.
• High accuracy with ±3% FS depending on the parameter being measured.
• RS485 communication protocol (Modbus) for long-distance data transmission and integration with other systems.

The PIC18F4550 is an ideal microcontroller for low power (nanoWatt) and connectivity applications. It features three serial ports: FS-USB (12Mbit/s), I²C™, and SPI™ (up to 10 Mbit/s), along with an asynchronous (LIN capable) serial port (EUSART). With large amounts of RAM for buffering and enhanced Flash program memory, this microcontroller is perfect for embedded control and monitoring applications that require periodic connection with a personal computer via USB for data upload/download and firmware updates.

The Arduino Uno R3 is a versatile and powerful microcontroller board based on the ATmega328P. It is designed for a wide range of applications, from simple projects to complex systems. This board is perfect for beginners and experienced developers alike, offering a robust platform for prototyping and development.

The PIC12F675 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® MCU architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer entry-level products. This microcontroller is designed for field re-programmability, offering flexibility and convenience.

The 5 Watt 10 Ohm Ceramic Cement High Power Resistor is a reliable and durable component designed for various electronic applications. Featuring a 5% tolerance and easy mounting, this resistor ensures precise performance and long life. RoHS compliant.

Key Features:

• Standard Type with Excellent Ratings
• Long Life
• Easy Mounting
• RoHS Compliant
• Color: White
• Resistor Size: 22x9x5mm
• Lead Diameter: 0.7mm
• Resistance Value: 10Ω
• Power Rating: 5W
• Material: Organic solid (Cement)
• Resistance Tolerance: ± 5%

Discover the Servo Motor SG90, a compact and lightweight motor ideal for various applications requiring precise control and reliable performance. Operating at 3.0V to 7.2V, this servo motor is perfect for robotics, automation, and DIY projects in Bangladesh.

Key Features:

• Operating voltage: 12V DC
• Durable and efficient design
• Suitable for various applications including aquariums, water features, and solar water systems
• Compact and easy to install

Discover the DC Gear Motor / Magnetic Anti-interference Smart Car Chassis, ideal for robotics and smart car projects in Bangladesh. Operating at 3-6V, it features a gear ratio of 1:48 and offers reliable performance with minimal interference.

The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

The Mini Submersible Water Pump is perfect for various applications, offering a reliable and efficient solution for your water pumping needs. Ideal for use in aquariums, fountains, and other small water projects.

• DC Voltage: 3V
• Working Current: 130-220mA
• Power: 0.4-1.5W
• Maximum Lift: 40-110cm (15.75"-43.4")
• Flow Rate: 100L/H
• Outside Diameter of Water Outlet: approx. 7.5mm (0.3")
• Inside Diameter of Water Outlet: approx. 4.7mm (0.18")
• Dimensions: Diameter: 24mm (0.95"), Length: 45mm (1.8"), Height: 33mm (1.30")

The PIC16F73 is a powerful and easy-to-program CMOS FLASH-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it compatible with other PIC microcontrollers like the PIC16C5X, PIC12CXXX, and PIC16C7X series. This microcontroller is ideal for advanced A/D applications in automotive, industrial, appliances, and consumer electronics.

The Atmel ATtiny13A-PU is a picoPower 8-bit AVR RISC-based microcontroller designed for high performance and low power consumption. This microcontroller is ideal for a variety of applications, offering a compact and efficient solution with its powerful instruction set and versatile features.

Discover the Arduino Uno R3 with SMD Atmega328 IC, a versatile microcontroller board designed for various electronic projects in Bangladesh. Operating at 5V with a recommended input voltage of 7-12V, it features 14 digital I/O pins, 6 PWM outputs, and 6 analog inputs, making it perfect for DIY electronics and prototyping.

The MQ-4 Gas Sensor Module is designed to detect natural gas and methane, operating at a voltage of 5V. This module is ideal for environmental monitoring and safety systems. Key features include:

• Sensor Type: Semiconductor
• Operating Voltage: VCC - 5V±0.1
• Digital Output (DO): TTL 0 and 1 (0.1 and 5V)
• Analog Output (AO): 0.1-0.3V (relative to pollution), max 4V at high concentration
• Gas Detection: Natural gas/Methane
• Detection Concentration: 200-10000ppm
• Interfaces: 1 TTL input (HSW), 1 TTL output (ALR)
• Heater Consumption: <750mw
• Operating Temperature: 14 to 122°F (-10 to 50°C)
• Humidity: <95% RH
• Sensing Resistance: 10KΩ-60KΩ (1000ppm CH4)
• Load Resistance: 20KΩ
• Preheat Time: Over 24 hours
• Encapsulation: Bakelite, Metal cap

Discover the 50Kg Resistance Train Half-Bridge Weight Sensor by Keyestudio, perfect for various electronic weighing devices in Bangladesh. This set includes four sensors, each with a total rated load of 50Kg, ideal for hopper scales, platform scales, and more.