Discover the 3x4 Matrix Key Pad, a robust and reliable membrane keypad featuring 12 keys in a 3x4 layout. Perfect for microcontroller projects in Bangladesh, it operates within a voltage range of 3V to 5V DC and comes with Dupont 7 pins for effortless connection. This keypad is ideal for various electronic applications, designed to withstand everyday use.

The AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller from Atmel, featuring 8K bytes of in-system programmable Flash memory. This microcontroller is designed for a wide range of applications, offering robust performance and flexibility. It includes several standard features that make it suitable for embedded control applications.

Discover the Arduino Nano ATmega328p, a powerful microcontroller board designed for a variety of electronic projects in Bangladesh. Featuring the Atmel ATmega328 microcontroller, it operates at 5V with a recommended input voltage of 7-12V. With 14 digital I/O pins and 8 analog input pins, it offers versatile connectivity and performance for your DIY electronics.

Discover the LDR Photoresistor Large 10mm GL10516, a highly sensitive light-dependent resistor ideal for various electronic applications in Bangladesh. With a diameter of 10mm, it features a maximum voltage of 250 VDC and an operating temperature range of -30˚C to +70˚C. Perfect for projects requiring precise light detection.

Discover the 4 Pin Push Switch, a small SMD tactile switch perfect for various electronic applications in Bangladesh. Measuring 6x6mm, it features an operating force of 180/250(±30gf) and a lifespan of 100,000 times. Ideal for microcontroller projects and DIY electronics, this switch is designed for reliability and ease of use.

The PIC12F675 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® MCU architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer entry-level products. This microcontroller is designed for field re-programmability, offering flexibility and convenience.

The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

Discover the Arduino Uno R3 with SMD Atmega328 IC, a versatile microcontroller board designed for various electronic projects in Bangladesh. Operating at 5V with a recommended input voltage of 7-12V, it features 14 digital I/O pins, 6 PWM outputs, and 6 analog inputs, making it perfect for DIY electronics and prototyping.

The Digital Caliper High Quality is a precision measuring tool designed for accurate measurements. With its 150mm range, it offers dual reading in both metric and imperial units. The extra-large display screen and four measurement functions ensure ease of use and versatility, while the fine adjustment roller provides precision. Complete with a storage case and battery, it's the perfect tool for various measuring tasks.

Key Features:

• Metric or imperial dual reading
• Extra-large display screen
• Four measurement functions
• Fine adjustment roller
• Complete with storage case and battery

The MQ-4 Gas Sensor Module is designed to detect natural gas and methane, operating at a voltage of 5V. This module is ideal for environmental monitoring and safety systems. Key features include:

• Sensor Type: Semiconductor
• Operating Voltage: VCC - 5V±0.1
• Digital Output (DO): TTL 0 and 1 (0.1 and 5V)
• Analog Output (AO): 0.1-0.3V (relative to pollution), max 4V at high concentration
• Gas Detection: Natural gas/Methane
• Detection Concentration: 200-10000ppm
• Interfaces: 1 TTL input (HSW), 1 TTL output (ALR)
• Heater Consumption: <750mw
• Operating Temperature: 14 to 122°F (-10 to 50°C)
• Humidity: <95% RH
• Sensing Resistance: 10KΩ-60KΩ (1000ppm CH4)
• Load Resistance: 20KΩ
• Preheat Time: Over 24 hours
• Encapsulation: Bakelite, Metal cap

Discover the DC Gear Motor / Magnetic Anti-interference Smart Car Chassis, ideal for robotics and smart car projects in Bangladesh. Operating at 3-6V, it features a gear ratio of 1:48 and offers reliable performance with minimal interference.

The PIC18F4550 is an ideal microcontroller for low power (nanoWatt) and connectivity applications. It features three serial ports: FS-USB (12Mbit/s), I²C™, and SPI™ (up to 10 Mbit/s), along with an asynchronous (LIN capable) serial port (EUSART). With large amounts of RAM for buffering and enhanced Flash program memory, this microcontroller is perfect for embedded control and monitoring applications that require periodic connection with a personal computer via USB for data upload/download and firmware updates.

The 4-ARRAY Infrared Tracking Obstacle Avoidance Car Sensor is designed for Arduino projects, offering reliable tracking and obstacle avoidance capabilities. This sensor operates at 3.3V to 5V DC, providing adjustable detection distances between 1 mm to 60 cm. Ideal for robotics and smart car applications.

Key Features:

• Working Voltage: 3.3V to 5V DC

• Current Requirement: Use more than 1A power supply

• Working Temperature: -10°C to +50°C

• Detection Distance: 1 mm to 60 cm adjustable

• Installation: M3 screw aperture

• Control Plate Size: 44 mm x 30 mm x 8.5 mm

• Small Board Sensor (Obstacle Avoidance): 11 mm x 25 mm x 10 mm

• Small Plate Sensor (Tracking): 20 mm x 11 mm x 15 mm

• High Accuracy: Provides precise current measurement for analog voltmeters.
• Durable Build: Works in harsh environmental conditions from -40°C to +60°C.
• Stable Performance: Maintains stability under shock frequency endurance of 80-120 times/min.
• Overload Protection: Handles up to 120% of the rated current without performance loss.

The 6-0-6 Volt 600mA Transformer is designed to provide reliable power with an industrial standard, heavy-duty quality. This transformer delivers a dual 6V output with a total current capacity of 600mA, making it suitable for various applications that require stable voltage and current. It’s a perfect fit for powering electronics projects and industrial equipment.

• Voltage: 2 x 6V
• Current: 1 x 600mA
• Quality: Industrial Standard, Heavy Duty
• Package Includes: 1x 6-0-6 Volt 600mA Transformer

The Mini Air Pump is a compact and efficient device designed for a variety of applications. It offers reliable performance in a small, easy-to-use package, making it perfect for inflating items quickly and conveniently.

• Compact and lightweight design
• Powerful inflation capabilities
• Easy to use and portable
• Suitable for inflating tires, sports equipment, and more
• Durable construction for long-lasting use