The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

• Wide operating voltage range of 4.5-30V DC for versatile use.
• IP68 protection rating ensures resistance to dust and water, allowing for reliable outdoor use.
• High accuracy with ±3% FS depending on the parameter being measured.
• RS485 communication protocol (Modbus) for long-distance data transmission and integration with other systems.

The Digital Clamp Meter DT200 is a versatile and multifunctional tool for measuring electrical parameters with high accuracy. Equipped with a 3 1/2 digits LCD display, data-hold function, and low battery indication, this clamp meter is essential for any toolkit. Key specifications include:

• Max. Reading: 1999
• Data-hold function
• Low battery indication
• Audible continuity
• DC Voltage: 600V ±(0.8%+1dgt)
• AC Voltage: 600V ±(0.5%+1dgt)
• AC Current: 20A-200A ±(2.0%+5dgt)
• Resistance Test: 20KΩ ±(1.0%+2dgt)
• Continuity Test
• Diode Test
• Power Supply: 1.5V*2
• Max Display: 1999
• Weight: 310g (including battery)
• Dimensions: 193L×63W×37Hmm

The Mini Submersible Water Pump is perfect for various applications, offering a reliable and efficient solution for your water pumping needs. Ideal for use in aquariums, fountains, and other small water projects.

• DC Voltage: 3V
• Working Current: 130-220mA
• Power: 0.4-1.5W
• Maximum Lift: 40-110cm (15.75"-43.4")
• Flow Rate: 100L/H
• Outside Diameter of Water Outlet: approx. 7.5mm (0.3")
• Inside Diameter of Water Outlet: approx. 4.7mm (0.18")
• Dimensions: Diameter: 24mm (0.95"), Length: 45mm (1.8"), Height: 33mm (1.30")

Key Features:

• Max flow rate: 10L/min (600L/H, 160GPH)
• Max lift height: 16ft (5m)
• Noise level: <40dB (typically 38dB)
• Power consumption: 8W
• Rated voltage: 12V DC
• Rated current: 1.1A
• Overall size: Approximately 80 x 48 x 6mm (3.15 x 1.89 x 2.48 inches)
• Inlet diameter: 16mm (Outer), 12mm (Inner)
• Outlet diameter: 12mm (Outer), 6.9mm (Inner)
• Inlet/Outlet: 1/2 inch male thread
• Power supply: Solar panel, DC electric source, battery
• Max working temperature: 50°C (122°F)
• Fluids: Water, oil, gasoline, acid and alkali solutions
• Waterproof level: IP68
• Driving method: Brushless, Permanent Magnetic
• Life span: More than 30,000 hours
• Pump material: ABS

Discover the Mini White Push Button, a tactile micro switch perfect for various electronic projects in Bangladesh. Available in two sizes (6x6x4.3mm and 6x6x5mm), it features DIP mounting for easy installation and reliable performance.

The Arduino Uno R3 is a versatile and powerful microcontroller board based on the ATmega328P. It is designed for a wide range of applications, from simple projects to complex systems. This board is perfect for beginners and experienced developers alike, offering a robust platform for prototyping and development.

The ATmega328P chip with bootloader is a versatile and powerful microcontroller, widely used in various electronics projects. It is based on the AVR enhanced RISC architecture, providing efficient instruction execution and high performance. This microcontroller is pre-loaded with a bootloader, making it easy to program and integrate into your projects.

Discover the DC Gear Motor / Magnetic Anti-interference Smart Car Chassis, ideal for robotics and smart car projects in Bangladesh. Operating at 3-6V, it features a gear ratio of 1:48 and offers reliable performance with minimal interference.

The Atmel ATtiny13A-PU is a picoPower 8-bit AVR RISC-based microcontroller designed for high performance and low power consumption. This microcontroller is ideal for a variety of applications, offering a compact and efficient solution with its powerful instruction set and versatile features.

Discover the Servo Motor SG90, a compact and lightweight motor ideal for various applications requiring precise control and reliable performance. Operating at 3.0V to 7.2V, this servo motor is perfect for robotics, automation, and DIY projects in Bangladesh.

Key Features:

• New water pump from excess inventory equipment.
• Originally made for Keurig coffee brewing machines.
• Operates on 12 VDC nominal, with a current of 720 mA.
• Primary inlet diameter: 9/16".
• Secondary inlet diameter: 1/8".
• Outlet diameter: 3/16".
• To obtain maximum flow, both inlets should be submerged.
• 4 blade impeller with magnetic coupling to prevent water ingress.
• Dimensions: 3 3/8" long x 2 1/8" wide x 1 5/8" tall.
• Motor diameter: 1 1/16".
• Comes with a built-in mounting bracket.
• Weight: 3.6 oz (101 g).

The 5 Watt 10 Ohm Ceramic Cement High Power Resistor is a reliable and durable component designed for various electronic applications. Featuring a 5% tolerance and easy mounting, this resistor ensures precise performance and long life. RoHS compliant.

Key Features:

• Standard Type with Excellent Ratings
• Long Life
• Easy Mounting
• RoHS Compliant
• Color: White
• Resistor Size: 22x9x5mm
• Lead Diameter: 0.7mm
• Resistance Value: 10Ω
• Power Rating: 5W
• Material: Organic solid (Cement)
• Resistance Tolerance: ± 5%

The 5 Watt 2.2 Ohm Ceramic Cement High Power Resistor is a robust and reliable component for various electronic applications. With a 5% tolerance and easy mounting, this resistor ensures precise performance and long life. RoHS compliant.

Key Features:

• Standard Type with Excellent Ratings
• Long Life
• Easy Mounting
• RoHS Compliant
• Color: White
• Resistor Size: 22x9x5mm
• Lead Diameter: 0.7mm
• Resistance Value: 2.2Ω
• Power Rating: 5W
• Material: Organic solid (Cement)
• Resistance Tolerance: ± 5%

The Mini Air Pump is a compact and efficient device designed for a variety of applications. It offers reliable performance in a small, easy-to-use package, making it perfect for inflating items quickly and conveniently.

• Compact and lightweight design
• Powerful inflation capabilities
• Easy to use and portable
• Suitable for inflating tires, sports equipment, and more
• Durable construction for long-lasting use

Discover the SD Card Reader Module for Arduino, designed for simple operation and wide compatibility. This module supports standard WAV files and external SD card expansion, making it ideal for various audio and data projects in Bangladesh.