The 20N60 IGBT is a high-performance insulated-gate bipolar transistor (IGBT) designed for efficient power switching applications. With a maximum collector-emitter voltage (VCE) of 600V and a continuous collector current (IC) of 20A, it ensures reliable performance. Available in PG-TO-220-3-1 and PG-TO-247-3 packages.

Key Features:

• Type: SGP20N60 and SGW20N60
• Collector-Emitter Voltage (VCE): 600V
• Continuous Collector Current (IC): 20A
• Saturation Voltage (VCE(sat)): 2.4V
• Maximum Junction Temperature (Tj): 150°C
• Marking: G20N60
• Package: PG-TO-220-3-1 and PG-TO-247-3

The 10N60 A CLASS High Quality IGBT Transistor is designed for efficient power control in various applications. Key features include:

• Collector-Emitter Voltage (V_ceo): 600V
• Collector Current (I_c): 10A
• Fast IGBT Technology
• NPT TECH for enhanced performance
• High Quality and reliability

• Original Japanese Quality: 100% authentic TOSHIBA A1941 transistor.
• High Power Output: Perfect for high-power audio amplification and switching.
• Low Distortion: Ensures clear and accurate audio signal transmission.

Enhance your electronic circuits with the Bangladesh C2073 NPN Power Transistor. This high-performance transistor is perfect for applications requiring reliable and efficient power dissipation and voltage regulation.

• Type Designator: 2SC2073
• Material: Silicon (Si)
• Polarity: NPN
• Maximum Collector Power Dissipation: 25W
• Maximum Collector-Base Voltage: 150V
• Maximum Collector-Emitter Voltage: 150V
• Maximum Emitter-Base Voltage: 5V
• Maximum Collector Current: 1.5A
• Maximum Temperature: 150°C
• Transition Frequency: 1MHz
• Collector Capacitance: 70pF
• Forward Current Transfer Ratio (hFE): Min 40
• Package: TO220

MJE2955 - High Performance PNP Power Transistor

Discover the robust performance of the MJE2955 PNP Power Transistor, designed for high power applications with a collector-emitter voltage of -60V and a collector current of -10A. Featuring a DC current gain (hFE) of 20 to 70 and a power dissipation of 75W, this transistor is ideal for a variety of electronic circuits.

• Collector-Emitter Voltage (VCEO): -60V
• Collector Current (Ic): -10A
• DC Current Gain (hFE): 20 to 70
• Power Dissipation (PD): 75W

• Advanced HEXFET® Technology for high efficiency.
• Ultra-low on-resistance (Rds On) for minimal power loss.
• Fast switching speed, ideal for high-frequency applications.
• Dynamic dv/dt rating for improved performance.

• Pre-Amplifier: Low Level, Low Noise NPN Transistor
• Current Gain (hFE): 60 to 1000 (Good Linearity)
• Continuous Collector Current (IC): 100mA
• Collector-Emitter Voltage (VCEO): 45V

Specifications:

• Type: NPN Bipolar Junction Transistor
• Collector Current: 150mA (Max)
• Voltage Ratings:
  • Collector-Emitter: 50V
  • Collector-Base: 60V
  • Emitter-Base: 5V
• Power Dissipation: 400mW
• Frequency: 200MHz
• Gain: 70 to 700
• Package: TO-92

Package:

• 1 x C945 Transistor (TO-92 Package)

The 4N26 Optocoupler is a high-performance component designed for electrical isolation and efficient signal transmission. With a voltage isolation of 7500Vpk and a current transfer ratio of at least 20%, it ensures reliable performance. This optocoupler comes in a 6-DIP package for through hole mounting.

Key Features:

• Part NO.: 4N26M
• Package: 6-DIP (0.300, 7.62mm)
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 7500Vpk
• Current Transfer Ratio (Min): 20% @ 10mA
• Voltage - Output: 30V
• Current - DC Forward (If): 60mA
• Vce Saturation (Max): 500mV
• Output Type: Transistor with Base
• Mounting Type: Through Hole

Supplier: SICSTOCK

• High power handling with 80A continuous drain current and 100V drain-to-source voltage.
• Low Rds On (15mΩ @ 40A, 10V) for minimal conduction losses.
• Wide gate drive voltage range with ±20V max Vgs.
• High efficiency due to low gate charge (182 nC @ 10V).

• PNP polarity transistor for power applications
• High DC current gain of 25 at 1.5A and 4V
• Maximum operating frequency of 3 MHz
• Maximum collector-emitter voltage of 100V

Key Features:

• High-power audio amplifier IC
• Maximum output power: 32W
• Operating voltage: -25V to +25V
• Output: 28W with 4Ω speaker
• Short circuit and thermal protection
• Breadboard friendly

• High Voltage & Current Handling: 200V Drain-Source voltage and 30A continuous drain current.
• Low Rds On for efficient power switching.
• 180W Maximum Power Dissipation, ensuring stable performance under load.
• Gate-Source Voltage up to 20V for flexible control.

The NPN Transistor 25V 0.2A - BC109 offers reliable performance for various electronic applications. With a collector-emitter voltage of 25V and a transition frequency of 150MHz, it's ideal for general-purpose switching and amplification.

✔ Avalanche Rugged Technology – Ensures high durability and reliability
✔ Rugged Gate Oxide Technology – Provides better gate protection
✔ Lower Input Capacitance – Reduces switching losses for efficiency
✔ Improved Gate Charge – Enhances performance in high-frequency applications

The 2SC4793 NPN transistor is designed for high voltage and high frequency applications. With a maximum collector power dissipation of 20W, this silicon transistor provides excellent performance in various electronic circuits. Key features include:

• Type Designator: 2SC4793
• Material: Silicon (Si)
• Polarity: NPN
• Maximum Collector-Base Voltage: 230V
• Maximum Collector-Emitter Voltage: 230V
• Maximum Emitter-Base Voltage: 5V
• Maximum Collector Current: 1A
• Maximum Temperature: 150°C
• Transition Frequency: 100MHz
• Collector Capacitance: 20pF
• Minimum Forward Current Transfer Ratio: 100