- High-quality copper wire with enameled insulation for durability.
- 24 SWG gauge for standard applications requiring fine wires.
- Solderable polyurethane overcoat for easy soldering during electrical projects.
- Precise tolerance of +/-0.05mm for accurate installations.
All Cattegories
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone
- Write a review
Model: 3914
- TV System: NTSC, PAL
- Model: Turbo EOS1
- Image Sensor: 1/3" CMOS Sensor
- Horizontal Resolution: 1200 TVL
- Image Format: 4:3
Data Protection.
Delivery all over Bangladesh.

Guarantee safe & secure checkout
Specifications:
- TV System: NTSC/PAL
- Sensor: 1/3" CMOS Sensor
- Resolution: 1200 TVL (Horizontal)
- Lens: 2.1mm
- Video Output: CVBS
- Power Input: DC 3.3-9V
- Operating Temperature: -20℃ ~ +60℃
- Dimensions: 14mm x 14mm x 16mm
- Weight: 3.5g
- Video Output System: 4:3
Package:
- 1 x Caddx Turbo EOS1 FPV Camera
- 1 x Molex Picoblade 1.25mm 3Pin FPV Silicone Cable
- 1 x Screws Set
Description:
The Caddx Turbo EOS1 is a high-performance FPV camera designed for RC drones, providing excellent image quality with a 1200TVL horizontal resolution. It features a 1/3" CMOS sensor with support for both NTSC and PAL TV systems. The camera supports Global WDR (Wide Dynamic Range), Auto Gain Control, and 2DNR (Digital Noise Reduction) for clearer, more stable footage in various lighting conditions. The 2.1mm lens offers a wide viewing angle, and the camera operates within a wide power input range of DC 3.3-9V. With an operating temperature range of -20℃ to +60℃, it is suitable for a variety of weather conditions.
FAQ:
-
What TV systems are supported by the Caddx Turbo EOS1 FPV camera?
The camera supports both NTSC and PAL TV systems. -
What is the horizontal resolution of this camera?
The camera offers a 1200 TVL horizontal resolution for clear and detailed video. -
What is the operating temperature range of the camera?
The camera operates in a temperature range from -20℃ to +60℃. -
What is the power input range for this FPV camera?
The camera supports a wide DC 3.3V to 9V power input. -
What lens does the Caddx Turbo EOS1 camera use?
It uses a 2.1mm lens for a wide field of view.
Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone from ElectronicsBD. We have a large collection of the latest Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone in Bangladesh (BD) ?
The latest and special price of Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone in Bangladesh is BDT 3593 Taka. Buy best quality Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone from ElectronicsBD at a special price in Bangladesh (BD). You can buy Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন Caddx Turbo EOS1 1200TVL 2.1mm 1/3 CMOS 4:3 NTSC/PAL FPV Camera For RC Drone শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।Thank you for the reviews ! Your comment is submitted
16 other products in the same category:
- Overcharge and overdischarge protection
- Max working current of 10A and peak current of 20A
- Long life cycle of over 50,000 hours
- Small current consumption of just 6µA
The Propeller 1045 Props 10x4.5 CW/CCW Green Pair is perfect for enhancing the performance of your drones. These 2-blade propellers are designed for both 4 copter and 6 copter applications. Key features include:
- Model Type: 2-blade propeller
- Size: 10x4.5"
- Diameter of Shaft: 6.0mm
- Thickness of Shaft: 9.7mm
- Adjustable Adapter Ring: 3MM, 4MM, 5MM, 6MM, 7.8MM
- Weight: 28g/pair
- Suitable Wheelbase: 550mm - 700mm
- Durable rubber construction for better traction
- Compatible with various robot and car chassis
- Brass connector for strong attachment
- Hexagonal hub design for secure fitting
- High-quality spare parts for RC drones to enhance performance and durability.
- Includes essential motor components like 32T and 8T gears for smooth operation.
- Designed for E88, S89, and P5-Pro drone models.
- Made of durable PC plastic material for long-lasting use.
- High-capacity 1500mAh battery for extended performance.
- 25C continuous discharge rate for stable power output.
- 3-cell 11.1V configuration for efficient energy delivery.
- Lightweight design (112g) for easy portability.
- 50A Brushless ESC: High-performance electronic speed controller for RC vehicles
- 3A BEC: Built-in battery eliminator circuit for stable power supply
- Bidirectional Control: Allows forward and reverse movement
- Fully Automatic: No additional setup required for easy use
- Ultrasonic sensor for accurate distance measurement
- Measures distances from 20cm to 720cm
- High resolution of 1cm
- Wide operating temperature range from -20°C to 65°C
- Compact Design for easy storage and portability.
- Efficient Turbo Cooling for enhanced performance.
- Soft Start technology for smooth charging.
- Low Interference Technology for quiet and stable operation.
- All-in-One Design: Compact and lightweight with integrated sensors.
- Advanced Stability Algorithm: Ensures precise flight control.
- Multiple Flight Modes: Manual, Attitude, and GPS modes with intelligent switching.
- GPS Module Support: Enables accurate position hold.
- Supports RC airplanes with a flight weight of up to 3.5kg.
- High-torque servoless mechanism ensures smooth and reliable operation.
- Quick deployment with a response time of 0.6s-0.8s.
- Durable 5mm landing structure for enhanced stability.
- High Capacity: 3500mAh capacity, providing long-lasting power for high-demand applications.
- High Discharge Rate: 30C continuous discharge rate, ensuring stable performance under heavy loads.
- Fast Charging: 5C charge rate for quick recharging.
- Rechargeable Lead Acid Battery: Designed for long-lasting power supply in various applications.
- Compact Design: Small form factor, making it ideal for portable or space-constrained setups.
- High Capacity: 1300mAh capacity ensures reliable performance.
- Durable Build: Built with robust materials for extended service life.
- High-quality 35A Brushless ESC for RC cars.
- Compatible with 1/18, 1/16, and 1/14 RC car models.
- Sensorless brushless motor technology for better efficiency and performance.
- Supports both Lipo (2-3 cells) and NIMH (4-9 cells) batteries.
Specifications:
- Material: High-quality metal
- Connector Size: 2mm to 2mm
- Application: Suitable for RC cars, boats, DIY model cars, and ship models
- Type: Universal joint (Cardan Joint)
- Function: Motor connector for transmitting rotational force between misaligned shafts
Package:
1x Metal 2mm to 2mm Car Cardan Joint
- Height: 11mm.
- Width: 25mm.
- Material: ABS plastic.
- Pitch: about 16mm.
- Aperture: 2mm M2 screws.
- High-quality copper wire with enameled insulation for durability.
- 24 SWG gauge for standard applications requiring fine wires.
- Solderable polyurethane overcoat for easy soldering during electrical projects.
- Precise tolerance of +/-0.05mm for accurate installations.
- Overcharge and overdischarge protection
- Max working current of 10A and peak current of 20A
- Long life cycle of over 50,000 hours
- Small current consumption of just 6µA
The Propeller 1045 Props 10x4.5 CW/CCW Green Pair is perfect for enhancing the performance of your drones. These 2-blade propellers are designed for both 4 copter and 6 copter applications. Key features include:
- Model Type: 2-blade propeller
- Size: 10x4.5"
- Diameter of Shaft: 6.0mm
- Thickness of Shaft: 9.7mm
- Adjustable Adapter Ring: 3MM, 4MM, 5MM, 6MM, 7.8MM
- Weight: 28g/pair
- Suitable Wheelbase: 550mm - 700mm
- Durable rubber construction for better traction
- Compatible with various robot and car chassis
- Brass connector for strong attachment
- Hexagonal hub design for secure fitting
- High-quality spare parts for RC drones to enhance performance and durability.
- Includes essential motor components like 32T and 8T gears for smooth operation.
- Designed for E88, S89, and P5-Pro drone models.
- Made of durable PC plastic material for long-lasting use.
- High-capacity 1500mAh battery for extended performance.
- 25C continuous discharge rate for stable power output.
- 3-cell 11.1V configuration for efficient energy delivery.
- Lightweight design (112g) for easy portability.
- 50A Brushless ESC: High-performance electronic speed controller for RC vehicles
- 3A BEC: Built-in battery eliminator circuit for stable power supply
- Bidirectional Control: Allows forward and reverse movement
- Fully Automatic: No additional setup required for easy use
- Ultrasonic sensor for accurate distance measurement
- Measures distances from 20cm to 720cm
- High resolution of 1cm
- Wide operating temperature range from -20°C to 65°C
- Compact Design for easy storage and portability.
- Efficient Turbo Cooling for enhanced performance.
- Soft Start technology for smooth charging.
- Low Interference Technology for quiet and stable operation.
- All-in-One Design: Compact and lightweight with integrated sensors.
- Advanced Stability Algorithm: Ensures precise flight control.
- Multiple Flight Modes: Manual, Attitude, and GPS modes with intelligent switching.
- GPS Module Support: Enables accurate position hold.
- Supports RC airplanes with a flight weight of up to 3.5kg.
- High-torque servoless mechanism ensures smooth and reliable operation.
- Quick deployment with a response time of 0.6s-0.8s.
- Durable 5mm landing structure for enhanced stability.
- High Capacity: 3500mAh capacity, providing long-lasting power for high-demand applications.
- High Discharge Rate: 30C continuous discharge rate, ensuring stable performance under heavy loads.
- Fast Charging: 5C charge rate for quick recharging.
- Rechargeable Lead Acid Battery: Designed for long-lasting power supply in various applications.
- Compact Design: Small form factor, making it ideal for portable or space-constrained setups.
- High Capacity: 1300mAh capacity ensures reliable performance.
- Durable Build: Built with robust materials for extended service life.
- High-quality 35A Brushless ESC for RC cars.
- Compatible with 1/18, 1/16, and 1/14 RC car models.
- Sensorless brushless motor technology for better efficiency and performance.
- Supports both Lipo (2-3 cells) and NIMH (4-9 cells) batteries.
Specifications:
- Material: High-quality metal
- Connector Size: 2mm to 2mm
- Application: Suitable for RC cars, boats, DIY model cars, and ship models
- Type: Universal joint (Cardan Joint)
- Function: Motor connector for transmitting rotational force between misaligned shafts
Package:
1x Metal 2mm to 2mm Car Cardan Joint
- Height: 11mm.
- Width: 25mm.
- Material: ABS plastic.
- Pitch: about 16mm.
- Aperture: 2mm M2 screws.
- High-quality copper wire with enameled insulation for durability.
- 24 SWG gauge for standard applications requiring fine wires.
- Solderable polyurethane overcoat for easy soldering during electrical projects.
- Precise tolerance of +/-0.05mm for accurate installations.
- Overcharge and overdischarge protection
- Max working current of 10A and peak current of 20A
- Long life cycle of over 50,000 hours
- Small current consumption of just 6µA
The Propeller 1045 Props 10x4.5 CW/CCW Green Pair is perfect for enhancing the performance of your drones. These 2-blade propellers are designed for both 4 copter and 6 copter applications. Key features include:
- Model Type: 2-blade propeller
- Size: 10x4.5"
- Diameter of Shaft: 6.0mm
- Thickness of Shaft: 9.7mm
- Adjustable Adapter Ring: 3MM, 4MM, 5MM, 6MM, 7.8MM
- Weight: 28g/pair
- Suitable Wheelbase: 550mm - 700mm
- Durable rubber construction for better traction
- Compatible with various robot and car chassis
- Brass connector for strong attachment
- Hexagonal hub design for secure fitting
- High-quality spare parts for RC drones to enhance performance and durability.
- Includes essential motor components like 32T and 8T gears for smooth operation.
- Designed for E88, S89, and P5-Pro drone models.
- Made of durable PC plastic material for long-lasting use.