• Compact Design with 15x11x19mm motor size
• High-Speed Operation at 14000 RPM
• Wide Voltage Range from 1.5V to 6V
• Eccentric Vibrator Size of 7x5mm for efficient vibration

Specifications:

• Brand: Red Volcano
• Cell: 3x (3S)
• Voltage: 11.1V
• Capacity: 1500 mAh 
• Discharge Rate: 35C
• Type: Lithium polymer battery (Li-Po)
• Applications: RC, car, Boat, Drone, Helicopter, etc....

Package:

1x Red Volcano 1500 mAh 11.1V 35C 3S Li-Po lithium polymer battery

• Next-Generation CPU: ARM Cortex-M4 72MHz with Math Co-processor (FPU) for efficient flight calculations and faster loop times (up to 2x faster than STM32F1).
• No-Compromise IO: Supports OSD, SmartPort, SBus, GPS, LED strips, battery monitoring, sonar, and 8 motors simultaneously.
• Flight Logging: On-board high-capacity black box flight log recorder to optimize tuning and improve setup.
• OneShot ESC & Programmable LEDs: Full support for OneShot ESCs for faster response and sharper tuning. Dedicated output for multi-colored LED strips, ideal for FPV racing, line-of-sight flying, and night flying.

• KV Rating: 4600KV (RPM per Volt)
• Max Current: 43A for high performance.
• Max Watts: 600W of power for demanding applications.
• Max Voltage: Less than 14V

• High capacity of 6000mAh for extended battery life
• 3.7V voltage for standard Li-Po power
• Compact and lightweight design
• Lithium Polymer (Li-Po) battery type for efficient power delivery

• High-Quality Material: Made from durable materials for long-lasting performance.
• Three-Part Design: Includes upper and lower gaskets with a middle piece for optimal functionality.
• Easy Installation: Simple installation steps: first install the lower piece, then the ball and cage, and finally the upper piece.
• Shaft Rotation: The upper piece fixes the shaft and drives it to rotate.

Specifications:

• Command Protocol: PWM
• Operating Voltage (V): Min: 4.80 / Max: 6.00
• Weight (g): Min: 55.20
• Stall Torque (kgf•cm / oz•in): Min: 7.7 / 106.93 / Max: 9.6 / 133.32
• No Load Speed (sec/60°): Min: 0.24 / Max: 0.2
• Running Current (mA): Min: 350 / Max: 450
• Stall Current (mA): Min: n /a: Max: n /a
• Circuit: Analog
• Rotation: Standard
• Operating Voltage (V): Min: 4.80 / Max: 6.00
• Torque Range    Min (KG/CM): 9.60
• Max (N/CM): 0.00
• Max Speed (SEC/60): 0.20
• Case Size (mm): 19.80
• Dimensions (mm): 40.6 x 19.8 x 37.8
• Weight (g): 55.20
• Motor Type: Cored Metal Brush
• Potentiometer: Conventional
• Gear Material: 1 Metal-Plastic & 3 Metal
• Horn Gear Spline: 24T (Ø6)
• Case Material: Engineering Plastic

Package:

1x servo set

• Input Voltage Range: 9 - 18V DC (3S-4S LiPo operation)
• Regulated 5V and 12V Outputs
• LED Power Indicators: For 5V & 12V outputs
• ESC Outputs:
  • Continuous Current: 25A4 or 15A6
  • Peak Current (10 seconds/minute): 30A4 or 20A6

• Model No: DN-6612
• Voltage: DC 220V-240V
• Speed: 12000 RPM
• Weight: 340g

• Overcharge Protection with voltage range of 4.25-4.35V ± 0.05V
• Over-discharge Protection with voltage range of 2.5-3.0V ± 0.05V
• High Current Handling with an upper limit of 5A operating current and 7A instantaneous current
• Wide Operating Temperature range of -40°C to +50°C

The Wild Scorpion 500mAh 2S 25C 7.4V LiPo Battery is perfect for high-performance RC models, offering higher capacity than comparable size packs. This rechargeable battery is suitable for RC cars, airplanes, and helicopters, providing reliable power and efficiency.

Key Features:

• Higher Charge Voltage: Greater than standard lipos

• High Performance: Ideal for high-performance models

• High Capacity: Offers more power compared to similar size packs

• Heavy Duty Leads: Equipped with silicone wire discharge leads

• Rechargeable: Convenient and reusable

Specifications:

• Material: High-quality metal
• Connector Size: 2.3mm to 3mm
• Application: Suitable for RC cars, boats, DIY model cars, and ship models
• Type: Universal joint (Cardan Joint)
• Function: Motor connector for transmitting rotational force between misaligned shafts

Package:

1x Metal 2.3mm to 3mm Car Cardan Joint

• Overcharge Protection: Protects against overcharging with a range of 4.25V – 4.35V.
• Over Voltage Protection: Prevents damage with an over voltage range of 2.5V – 3.0V.
• High Current Capacity: Supports a maximum working current of 13A and an instantaneous current of up to 20A.
• Temperature Resistance: Can withstand temperatures ranging from -40°C to 50°C for reliable performance.

• 30A brush motor ESC: Supports 130/180/260/280/380 brush motors.
• Multiple functions: Forward, reverse, and brake mode.
• Wide voltage range: Works with 3.0V-9.4V power input.
• High efficiency: Constant current of 20A, max 25A for <30s, pulsed 50A for <5s.

• 20KG torque output, suitable for high-load applications
• Fully metal gear construction for durability
• Dual ball bearings (2BB) for smooth operation
• 25T output spline for secure connection

• Lightweight Design: Weighs only 10.7 to 15 grams, ideal for micro quadcopters.
• Compact Dimensions: 82x83x11mm for streamlined performance.
• Advanced Technology: Manufactured using FDM technology for precision and durability.
• Support-Free Construction: Eliminates the need for additional support structures during assembly.