Availability:
30 In Stock
- Comprehensive kit for Arduino learning
- Includes essential components like resistors, LEDs, sensors
- Easy to assemble and experiment with
- Perfect for classroom use or hobby projects
Traffic Light System Project
- Write a review
Model: 6286
৳0.00
No tax
- Arduino Uno R3 With Cable
- LED - Basic Green 3mm
- LED - Basic Red 3mm
- LED - Basic Yellow 3mm
Safe Shopping
Data Protection.
Fast Delivery
Delivery all over Bangladesh.
Guarantee safe & secure checkout
Building an Arduino-Based Traffic Light System: A Step-by-Step Guide
Creating a traffic light system using an Arduino is an excellent project to understand the fundamentals of electronics, programming, and system design. This project allows you to simulate a real-world application, providing a foundation for more complex endeavors in the future.
Project Overview
The goal of this project is to build a functional traffic light system that mimics the operation of standard traffic lights at intersections. The system will use an Arduino to control LEDs representing the red, yellow, and green lights, managing the timing and sequence of these lights to simulate traffic control.
Components Needed
- Arduino Board: An Arduino Uno is commonly used for such projects due to its simplicity and availability.
- LEDs: Three LEDs—red, yellow, and green—to represent the traffic lights.
- Resistors: Appropriate resistors (e.g., 220Ω) to limit the current through the LEDs.
- Breadboard and Jumper Wires: For assembling the circuit without soldering.
- Power Supply: A USB cable to power the Arduino.
Understanding the Basics
Before assembling the circuit, it's crucial to understand how traffic lights operate:
- Red Light: Indicates vehicles must stop.
- Yellow Light: Warns that the light is about to change to red.
- Green Light: Allows vehicles to proceed.
In a typical traffic light sequence, the green light is on for a set duration, followed by the yellow light, and then the red light. This sequence ensures an orderly flow of traffic and provides warnings before the light changes.
Setting Up the Circuit
-
Connecting the LEDs: Insert the LEDs into the breadboard, ensuring they are oriented correctly (long leg for anode, short leg for cathode). Connect each LED to the Arduino's digital pins through a resistor to prevent damage to the LEDs.
-
Wiring: Use jumper wires to connect the Arduino to the breadboard, ensuring all connections are secure. The red LED can be connected to pin 2, the yellow to pin 3, and the green to pin 4, each through a 220Ω resistor.
Programming the Arduino
While specific code details are omitted here, the general approach involves:
-
Defining Variables: Assign names to the pin numbers connected to the LEDs for easy reference in the code.
-
Setting Pin Modes: In the
setup()function, configure the defined pins as outputs usingpinMode(). -
Implementing the Light Sequence: In the
loop()function, create a sequence that turns on the green light for a specified duration, followed by the yellow light, and then the red light. This can be achieved usingdigitalWrite()to control the LEDs anddelay()to manage the timing between light changes.
Testing and Calibration
After setting up the circuit and uploading the code to the Arduino, observe the operation of the traffic light system. Ensure that the LEDs light up in the correct sequence and that the timing intervals match the desired durations. Adjust the delay() values in the code as needed to fine-tune the timing.
Expansion Ideas
Once the basic system is operational, consider enhancing the project by:
-
Adding Pedestrian Signals: Incorporate additional LEDs to simulate pedestrian crossing lights, providing a more comprehensive traffic control system.
-
Implementing Sensor Integration: Use sensors like ultrasonic or infrared to detect vehicle presence, allowing the system to adjust light timings dynamically based on traffic density.
-
Exploring Advanced Controllers: For more complex control, consider using a Raspberry Pi or other microcontrollers to manage the traffic light system, enabling features like remote control or real-time data analysis.
Conclusion
Building an Arduino-based traffic light system is a rewarding project that offers insights into both hardware and software aspects of electronics. It serves as a practical foundation for more advanced projects, allowing you to apply the knowledge gained to real-world applications.
Traffic Light System Project ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original Traffic Light System Project from ElectronicsBD. We have a large collection of the latest Traffic Light System Project to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of Traffic Light System Project in Bangladesh (BD) ?
The latest and special price of Traffic Light System Project in Bangladesh is BDT 0 Taka. Buy best quality Traffic Light System Project from ElectronicsBD at a special price in Bangladesh (BD). You can buy Traffic Light System Project at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন Traffic Light System Project শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।
6286
14 other products in the same category:
Availability:
Out of stock
- Arduino Uno R3 With Cable
- Servo Motor MG995
- 25W 5VDC 5A single group switching power supply SMPS AC 220V to DC 5V
- Solderless Breadboard Jumper Cable Wires (65 Pieces)
Availability:
1 In Stock
- Arduino Nano ATmega328p
- DS3231 Real Time Clock Module
- HC-SR04 Ultrasonic Distance Sensor Module
- NEO-M8N GPS Module with Ceramic Active Antenna
- SIM800L GPRS GSM Module
- 12X12MM PUSH BUTTON MODULE
- High Quality Power Bank Box 18650 Battery Charger Cover Power Bank Case DIY Box 3 USB Ports
- Real-Time Location Tracking
- Utilizes the NEO-M8N GPS module to provide precise real-time location data, ensuring users can track their movements or send location information when needed.
- Emergency Communication via GSM
- Equipped with the SIM800L GPRS GSM module, allowing users to send their GPS location via SMS or initiate calls in case of emergencies.
Availability:
Out of stock
- Arduino Uno R3: The main controller for managing the logic.
- MG90S Servo Motor: For opening and closing the dustbin lid and dispensing the chocolate.
- SIM800L GSM Module: To send SMS notifications.
- HC-SR04 Ultrasonic Sensor: To detect the presence of users in front of the dustbin & To sense when trash is thrown in and to trigger the chocolate dispensing.
Availability:
10000 In Stock
- Easy to Set Up: Designed for simple assembly.
- Learning Aid: Ideal for basic electrical learning projects.
- Complete Kit: Includes all necessary components to build a working circuit.
- For School Use: Perfect for students from standard 2 to 6.
Availability:
10 In Stock
- Arduino Uno R3 With Cable
- DHT22 Digital Temperature Humidity Sensor Module
- Analog Capacitive Soil Moisture Sensor Module
- LDR Light Sensor Module
- MQ-135 Gas Sensor
- RS485 Soil PH Sensor RS485 PR-3000-TR-PH-N01 Arduino ESP8266 ESP32
- 1 Channel 5V Relay Module
- DC 12V SUBMERSIBLE PUMP WHIT HOSE PIPE (1Meter)
- DC-12V Solenoid Valve-1/4 Inches Diameter
- 50mm cooling fan
- USB 5V Heating Heater Pad Massage For Warming Body Foot Winter Portable Warm Plate For Mouse Pad Shoes Gloves Health Care
- LCD Blue Display 1602
- 4 x 4 Matrix Array 16 Keys 4*4 Switch Keypad Keyboard Module for Arduino
- ESP-32 38PIN development board WIFI+Bluetooth 2 in 1 dual-core CPU
- HC-05 Bluetooth Module
- 12V 6A 72W POWER ADAPTER HIGH QUALITY
- 110mm x 60mm 1 Watt 6 Volt Polycrystalline Solar Cell Panel Module
- DS3231 Real Time Clock Module
Availability:
10000 In Stock
Discover the ultimate boating experience with our Water Boat Remote Control Full Setup Kit. This kit includes everything you need for an exhilarating time on the water, making it perfect for both beginners and enthusiasts.
Key Features:
- Complete setup with remote control
- High-performance motor for speed and agility
- Durable and water-resistant materials
- Easy to assemble and use
- Long-range remote control for extended fun
Availability:
9999 In Stock
- Real-time parking space detection within the campus
- Mobile app interface for students and faculty to reserve parking spots
- Integration with IoT devices for monitoring parking spaces
- Automated parking updates and notifications through push alerts
Availability:
1 In Stock
- Arduino Uno R3 With Cable
- VMS-3002-TR-NPK-N01 soil NPK memorier sensor
- 3.5 Inch 480x320 TFT LCD Display Module ILI9486 LCD screen For Arduino Uno
- Electric Cable Wire Dual Line Red Black Wiring Cable 23/076
- 10k Ohm 0.50W 1% carbon Film Resistor - 5 PCS
- Buzzer sensor 5v
Availability:
Out of stock
- Arduino Uno R3 With Cable
- L298N Stepper Motor Driver (Red)
- 2WD Smart Robot Car Chassis | Two Wheel Drive Robot Car Chassis
- TCRT5000 5-Way IR Tracking Sensor Module
Availability:
1 In Stock
- Arduino Uno R3 With Cable
- Fingerprint Sensor JM-101
- 3.5 Inch 480x320 TFT LCD Display Module ILI9486 LCD screen For Arduino Uno
- 4 Pin Push Switch With Cap
- 10k Ohm 0.50W 1% carbon Film Resistor - 5 PCS
- Buzzer sensor 5v
- Micro SD Card Adapter v1.1 Module for Arduino - Blue
- 25W 5VDC 5A single group switching power supply SMPS AC 220V to DC 5V
- 1 meter Electric Cable Wire Dual Line Red Black Wiring Cable 23/076
Availability:
1 In Stock
- Arduino Uno R3 With Cable
- SIM800L GPRS GSM Module
- Ublox NEO-6m GPS Module
- 25W 5VDC 5A single group switching power supply SMPS AC 220V to DC 5V
- Solderless Breadboard Jumper Cable Wires (65 Pieces)
- 12X12MM PUSH BUTTON MODULE
Availability:
1 In Stock
- Arduino Uno R3 With Cable
- HC-SR04 Ultrasonic Distance Sensor Module / Ultrasound proximity
- MG90S Micro Metal Gear Servo
- 25W 5VDC 5A single group switching power supply SMPS AC 220V to DC 5V
- 1 meter Electric Cable Wire Dual Line Red Black Wiring Cable 23/076