Info
Offer


Cart

Shield & Other Modules

Active filters

MAX9814 Microphone AGC Amplifier Module
Quick view

MAX9814 Microphone AGC Amplifier Module

৳360.00
Availability: 10000 In Stock
  • Wide Supply Voltage Range: 2.7V - 5.5V (3mA current consumption)
  • Automatic Gain Control (AGC): Selectable max gain of 40dB, 50dB, or 60dB
  • Low Noise & Low Distortion: 30nV/√Hz noise density, 0.04% THD (typ)
  • Frequency Response: 20Hz - 20kHz for high-fidelity audio
TRRS 3.5mm Audio Socket Jack Breakout Headphone Video Audio MP3 Jack Professional AL Module 3.5 MM Board
Quick view

TRRS 3.5mm Audio Socket Jack Breakout Headphone...

৳57.00
Availability: 10000 In Stock
  • TRRS (Tip-Ring-Ring-Sleeve) Design: Supports audio, microphone, and video signals
  • Universal Compatibility: Works with smartphones, MP3/MP4 players, and development boards
  • Breakout Board Design: Each conductor is broken out to a 0.1" spaced header
  • Easy Prototyping: Ideal for DIY electronics, Arduino projects, and audio applications
AVR ISP Programmer Expansion Shield Board For Arduino Uno R3 Mega2560 Nano Pro Mini Module Atmega328P Bootloader Burner SPI
Quick view

AVR ISP Programmer Expansion Shield for Arduino...

৳563.00
Availability: 10000 In Stock
  • Compatible with multiple Arduino boards, including Uno R3, Mega2560, Nano, and Pro Mini (5V 16M)
  • Built-in buzzer for audible feedback on bootloader burning status
  • On-board LED indicators for programming status and error detection
  • Supports ISP_6PIN and ISP_10PIN interfaces for flexible bootloader burning
ARDUINO UNO Proto Shield
Quick view

ARDUINO UNO Proto Shield

৳187.00
Availability: 10000 In Stock
  • Integrated buttons & LED circuits for easy prototyping
  • Exposed power pins (5V, GND, and Raw) for convenient connections
  • SOIC pad for IC placement
  • Mini breadboard with 170 tie points, attached with self-adhesive backing
L293D Motor Shield For Arduino
Quick view

L293D Motor Shield For Arduino

৳205.00
Availability: 100 In Stock
  • Brand new and high quality.
  • L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
  • Can drive DC motors and power supplies of up to 36V with a maximum current of 600mA per channel.
  • H-Bridge configuration allows voltage to be applied across a load in either direction, ideal for motors.
Joystick Shield For Arduino
Quick view

Joystick Shield For Arduino

৳261.00
Availability: 10000 In Stock
  • Direct plug-and-play puzzle board, no soldering needed.
  • Compatible with all Arduino main boards, including Arduino 2009, UNO, Mega 1280, and Mega 2560.
  • Includes five momentary push buttons (4 + joystick select button), similar to PlayStation 3 analog stick push button.
  • Two-axis thumb joystick for precise control.
L298P Motor Shield Motor Driver Extension Drive Module for Arduino UNO Mega 2560 Robot Tank Car Chassis RC Toy
Quick view

L298P Motor Shield Driver Module for Arduino

৳900.00
Availability: 10000 In Stock
  • Dual Motor Drive: Supports two DC motors with up to 2A current per channel.
  • Wide Voltage Range: 6.5V–12V (VIN Power Supply), 4.8V–35V (External Power).
  • PWM Speed Control: Supports precise motor speed control.
  • PLL Advanced Speed Control: Ensures smooth motor operation.
I2C LCD driver
Quick view

I2C LCD Driver Module for Arduino

৳90.00
Availability: 10000 In Stock
  • I2C Communication: Drives LCD 1602 or LCD 2004 through I2C communication.
  • Reduced Pin Usage: Reduces the number of pins required for connection between the LCD module and Arduino.
  • Adjustable LCD Contrast: Contrast can be adjusted via the built-in potentiometer for optimal display visibility.
DC 5-12V Mini ZVS Low Voltage Induction Heating Power Supply Module Induction Heating board for induction Heating with Coil
Quick view

DC 5-12V Mini ZVS Low Voltage Induction Heating...

৳899.00
Availability: 10000 In Stock
  • Wide Input Voltage Range: Operates with DC 5V to 12V input voltage.
  • High Power Output: Delivers 120W of power for induction heating.
  • Efficient Induction Heating: Designed for high-frequency induction heating applications.
  • Compact Size: 8x4cm in size, easy to integrate into various setups.
ACROBOTIC ESP8266 WeMos D1 Mini TP5410 Lithium Battery Charging And Boost Shield
Quick view

ACROBOTIC ESP8266 WeMos D1 Mini TP5410 Lithium...

৳219.00
Availability: 10000 In Stock
  • Lithium Battery Charging: Charges lithium batteries with a voltage range of 3.3V to 4.2V.
  • Boost Power Supply: Provides a 5V/1A boost power supply for efficient energy delivery.
  • Recommended Charging Voltage: Works optimally with 5V charging voltage.
  • Max. Charging Current: Supports a maximum charging current of 1A.
Mini 5V Traffic Light LED Display Module
Quick view

Mini 5V Traffic Light LED Display Module

৳65.00
Availability: 10000 In Stock
  • Compact Design: Ideal for DIY projects and educational purposes
  • 3 LED Colors: Red, Yellow, and Green for traffic signal simulation
  • Wide Compatibility: Works with both 3.3V and 5V power supply
  • Independent Control: Each LED can be controlled separately
VL53L0X laser ranging sensor module 940nm GY-VL53L0X
Quick view

VL53L0X laser ranging sensor module 940nm...

৳555.00
Availability: 10000 In Stock
  • High-Precision Laser Sensor: Measures absolute distance up to 2 meters
  • Compact Design: Small form factor for easy integration
  • I2C Communication: Simplifies connection with microcontrollers
  • Wide Voltage Compatibility: Works with 3V to 5V power supply
RGB Tri-Color LED Module 10mm
Quick view

RGB Tri-Color LED Module 10mm

৳78.00
Availability: 10000 In Stock
  • 10mm RGB LED with built-in module
  • Operates at 5V, easy to integrate with microcontrollers
  • Compact and lightweight, ideal for DIY electronics projects
  • Can produce various colors by adjusting the red, green, and blue channels
ESP8266 ESP-01/ESP-01S WS2812 RGB LED Controller Adapter Module
Quick view

ESP8266 ESP-01/ESP-01S WS2812 RGB LED...

৳95.00
Availability: 10000 In Stock
  • Easy Control: Control WS2812 light bars, rings, or addressable LED strips with this ESP8266 based module.
  • Arduino IDE Support: Program the module using the Arduino IDE for easy customization.
  • GPIO2 Pin Control: The module uses GPIO2 for controlling the LEDs.
  • Flexible Power Supply: Supports DC 3.7V-5V, making it versatile for different power sources.
High Precision PWM Frequency Meter XY-PWM with LCD Display Frequency Signal Generator Panel Meter Module Support TTL Output
Quick view

High Precision PWM Frequency Meter XY-PWM with...

৳580.00
Availability: 10000 In Stock
  • LCD Display: Clear frequency signal display with backlight, ensuring visibility even in low-light environments.
  • Adjustable PWM Signal Output: Output frequency and duty cycle (0%-100%) can be easily adjusted.
  • Wide Frequency Range: Supports frequencies from 1Hz to 150kHz, with high accuracy and stability.
Sine Wave Inverter 5V DC-AC SPWM Driver Board EGS002 12MHz Crystal Oscillator EG8010 IR2113 Driving Module
Quick view

EGS002 5V DC-AC 12MHz Sine Wave Inverter SPWM...

৳937.00
Availability: 10000 In Stock
  • Adjustable Output Frequency: Provides 50Hz fixed frequency sine wave and adjustable frequencies from 0-100Hz and 0-400Hz.
  • Modulation Modes: Supports both unipolar and bipolar modulation modes for versatile applications.
  • Dead-Time Control: Features four different dead-time settings (300nS, 500nS, 1.0uS, 1.5uS) for precise control.
  • Real-Time Feedback: Monitors voltage, current, and temperature in real-time, ensuring optimal performance and protection.
4 x 4 Matrix Array 16 Keys 4*4 Switch Keypad Keyboard Module for Arduino
Quick view

4 x 4 Matrix Array 16 Keys 4*4 Switch Keypad...

৳292.00
Availability: 10000 In Stock
  • 16 Button Matrix: Includes keys 0-9, #, *, and A-D, providing a wide range of input options.
  • Easy Communication: Simple and direct communication with any microcontroller, perfect for Arduino projects.
  • Compact Design: Space-efficient design ideal for embedded projects and prototyping.
  • Durable Keys: High-quality switches for responsive performance.
Raspberry Pi 4B/Zero W USB to Ethernet RJ45 Network Port USB HUB Hub Splitter
Quick view

Raspberry Pi 4B/Zero W USB to Ethernet RJ45...

৳2,610.00
Availability: 10000 In Stock
  • 3 USB Expansion Ports: Onboard 3 USB expansion ports, compatible with USB 2.0/1.1 for data transmission.
  • RTL8152B Ethernet Chip: Features an RJ45 network port with 10/100M adaptive Ethernet connectivity.
  • Multiple Indicators: Includes power (PWR), network port status (ACT), and USB expansion interface status (D1~D3).
USB Host Shield 2.0 for Arduino UNO MEGA ADK Compatible for Android ADK DIY Electronic Module Board
Quick view

USB Host Shield 2.0 for Arduino UNO MEGA ADK...

৳1,199.00
Availability: 10000 In Stock
  • Android ADK Support: Compatible with Google Android ADK for seamless Android device connection
  • Wide Android Device Compatibility: Supports Android phones (G1, Nexus One, Nexus S, Droid X) and tablet PCs with Android versions 2.3.4+ (Phones) and 3.1+ (Tablets)
  • Versatile Arduino Compatibility: Works with Arduino Uno 328, Arduino
RDM6300 RFID Reader Module - 125Khz
Quick view

RDM6300 RFID Reader Module - 125Khz

৳415.00
Availability: 10000 In Stock
  • Operates at 125KHz frequency for reliable RFID detection
  • TTL level RS232 interface for easy microcontroller integration
  • Low power consumption, working at <50mA
  • Effective receiving range of 20-50mm, depending on the environment