• Adjustable gain of 1.5 to 1000x
• Adjustable offset
• 120kHz bandwidth (gain = 100x)
• Input signal range of 100uV – 300mV

• Converts TTL signals to RS-485 for long-distance communication.
• Uses the MAX485 IC for reliable and low-power operation.
• Compatible with Arduino and other microcontroller platforms.
• Compact size, lightweight, and easy to integrate into projects.

Enhance your drone's navigation with the Radiolink SE100 GPS Module. Key features include:

• High positional accuracy: 0.5m with concurrent GNSS, 2.5m with single GNSS
• Velocity precision: 0.1m/s
• Max. height: 50000m, Max. speed: 515m/s, Max. acceleration: 4G
• Update rate: 10Hz
• Sensitivity: Tracking & Nav. -167dBm, Reacquisition -163dBm, Cold start -151dBm, Hot start -159dBm
• Quick startup: Cold start time 26s, Hot start time 1s
• Voltage: 5VDC ±5%, Current: 50-55mA
• GPS UART interface, Geomagnetic I2C interface
• Compact size: 4.7 x 4.7 x 1.5cm, Weight: 103g, Cable length: 30cm

Perfect for FPV RC drones, providing reliable and precise navigation data.

Specifications:

• Sensing Voltage Range: 0 V to 26 V
• Power Supply Voltage: 2.7 V to 5.5 V
• Offset Voltage: ±80 µV (max)
• Gain Error: 0.25% (max)
• Configurable Averaging Options: Yes
• Programmable Addresses: Four
• Alert and Warning Outputs: Programmable
• Reporting: Shunt and Bus Voltage

Package:

1x Module

• Relay Load Capacity: Supports both AC and DC with high capacity
• Operating Voltage: Works with 5V DC power supply
• High Current: Suitable for applications requiring up to 10A load
• Versatile: Can handle both AC (250V, 10A) and DC (30V, 10A) loads

• Compatibility: Designed specifically for ESP8266 ESP-01 WiFi module.
• Pin Spacing: 2.54mm (standard breadboard pitch) for easy integration with breadboards.
• Voltage Regulator: 3.3V onboard regulator for stable voltage supply.
• Output Voltage: Provides 3.3V for powering the ESP-01 module.

• High-frequency clock signal generator with square wave output.
• Compatible with Arduino SCM & DIY kits.
• Wide logic voltage range of 3.3V to 5V.
• Designed with high-quality PCB material for durability.

• High output current of approximately 5A maximum
• Automatic charging voltage and current adjustment
• Suitable for various battery types: Lead Acid, Gel, Tubular, Lithium Ion, LiFePO4
• Adjustable battery cut-off for customized protection

• Full HD 1080P resolution with up to 120FPS for smooth video capture
• AI-powered visual recognition for advanced object detection and tracking
• Wide field of view (80°–120°) for enhanced coverage
• USB 2.0 plug-and-play compatibility for easy setup and fast data transfer

Boost your SIM800L GPRS TCP IP module's performance with our Antenna for SIM800L GPRS TCP IP Module. This antenna ensures strong signal reception and reliable communication for your projects.

• Frequency range: 824-960MHz / 1710-1990MHz
• Gain: 2dB
• Connector: SMA male head
• Antenna length: 205mm (8 inches)
• Package includes: 1x Antenna

• Uses CH340G driver chip for stable USB-to-serial communication
• Supports all basic Windows versions without compatibility issues
• Built-in 1000μF solid capacitor for reliable power supply and crash prevention
• 3225 SMD crystal oscillator enhances serial stability

• 17mm diameter for compact design
• 5V 3Bit WS2812 RGB LED technology
• 5050 RGB LED for vibrant color output
• Round shape ideal for decorative lighting

Specifications:

• Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3 megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast mode plus)
• 2-wire serial control of focus mechanism
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10

• Compatible with multiple Arduino boards, including Uno R3, Mega2560, Nano, and Pro Mini (5V 16M)
• Built-in buzzer for audible feedback on bootloader burning status
• On-board LED indicators for programming status and error detection
• Supports ISP_6PIN and ISP_10PIN interfaces for flexible bootloader burning

• Built-in WS2812 IC for easy control
• Supports full-color RGB lighting
• Operates at 4V - 5.5V DC
• Compact and lightweight design

• Supports up to 80 voice commands, each up to 1500ms long.
• Can recognize a maximum of 7 voice commands simultaneously.
• High accuracy (99%) in ideal conditions.
• Easy to control via UART or GPIO.