Shield & Other Modules

Specifications:

• Type: WS2812 Lamp Bead Driver Board
• Voltage: 5V
• Color Modes: Full color, running water, seven color gradient, dazzle RGB
• Control: Microcontroller connection
• Wiring: Positive power line (+5V/VCC), ground wire (GND), signal line (DI)

Package:

1x Phantom Controller

Discover the 1 Channel 5V Relay Module, perfect for controlling high voltage devices with microcontrollers in Bangladesh. With a rated coil voltage of 5V DC and maximum switching voltage of 250V AC and 30V DC, this relay module supports a nominal current of 10A at 125V AC and 30V DC.

Discover the LCD Blue Display 1602, perfect for your Arduino projects in Bangladesh. This standard blue backlight HD44780 LCD supports 16 characters wide and 2 rows in white text on a blue background. Featuring an I2C serial interface, it simplifies data display with minimal resource usage.

Discover the ACS 712 Current Sensor, capable of accurately detecting AC or DC currents up to 30A. Ideal for over-current protection, battery chargers, switching mode power supplies, and more. Compatible with Arduino for easy integration.

Specifications:

• Sensing Voltage Range: 0 V to 26 V
• Power Supply Voltage: 2.7 V to 5.5 V
• Offset Voltage: ±80 µV (max)
• Gain Error: 0.25% (max)
• Configurable Averaging Options: Yes
• Programmable Addresses: Four
• Alert and Warning Outputs: Programmable
• Reporting: Shunt and Bus Voltage

Package:

1x Module

Specifications:

• Lens type: Standard M12
• Processor: NXP LPC4330, 204 MHz, dual-core
• Power Input : USB input (5V) or unregulated input (6V to 10V)
• Lens field-of-view: 80° horizontal, 40° vertical
• RAM: 264K bytes
• Flash: 2M bytes
• Length (mm): 38
• Width (mm):42
• Height (mm): 15.3
• Weight (g): 70

Package:

1x Pixy 2.1 Smart Vision Sensor-Object Tracking Camera

Specification:

• Light source： COB
• Color: Warm white
• CIR: >80
• Power: 20W
• Input Voltage: AC 220V-265V
• Housing Material: Aluminum
• Source Life: > 50,000 hours
• Lighting angle: 120

Package:

1x COB LED Chip Lamp 20W 220V Intelligent IC No Driver Needed LED Bulb for Flood Light Spotlight DIY Lighting 20W Warm White

Specifications:

• Mini DC Charging Fan Circuit Board
• 3 Level Speed Control & LED Indicator
• Ideal for Electrical Circuitry & Parts
• Best Choice To Replace Or Making a Mini Fan
• USB 5V Charging

Package:

1x Mini Rechargeable Fan Circuit Board with 3 Level Speed Control and Led Indicator

Specifications:

• Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3 megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast mode plus)
• 2-wire serial control of focus mechanism
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10

• Type: YL-99 Impact Switch Module
• Product Name: YL-99 Impact Switch Module sensor for r3
• Condition: YL-99 Impact Switch Module

• Supports FAT file system SD carrier
• Supports playing of 4Bit ADCPM format files
• Recognize the voice files automatically
• Support microprocessor and key control

Specifications:

• Connector Type: Micro USB to PCB
• Adapter Type: 2.54mm DIP 5 Pin
• Compatibility: Designed to interface Micro USB connectors with PCB boards
• Pin Spacing: 2.54mm
• Number of Pins: 5
• Easy Integration: Allows seamless integration of Micro USB connectivity into PCB projects
• Compact Design: Space-saving design suitable for compact electronic devices
• Material: High-quality materials ensure durability and reliability
• Versatile: Suitable for various DIY electronics projects, prototyping, and small-scale productions.

Package:

1x Micro USB to PCB 2.54mm DIP 5 P Adapter Module

• Operating voltage: 3.5-5V DC
• Current rating: 20mA
• Speaker power: 8ohm/3W
• Supported sampling rate (kHz): 8/11.025/12/16/22.05/24/32/44.1/48

• High-quality materials for guaranteed durability
• Chip-designed card reading circuit
• Low voltage, compact contactless card reader module
• Communicates with host via SPI mode

• Supports HUB75 port full color module, including ICN2038 IC
• Supports static to 1/32S scan mode
• Control range: 768*128, with a maximum width of 1280 and height of 256
• Communication ports: Wi-Fi and U-Disk

• Supports static to 1/32S scan mode
• Wi-Fi and U-Disk communication port
• Displays full-color text, images, time, and temperature
• 999 programs with remote switch support

• Wide sensing range of 20 to 150 cm (200 to 1500 mm) for versatile applications.
• Provides analog output for easy integration with microcontrollers.
• Low supply voltage requirement of 4.5 to 5.5V, making it suitable for battery-operated projects.
• Fast response time of 39 ms for real-time distance measurement.

Boost your SIM800L GPRS TCP IP module's performance with our Antenna for SIM800L GPRS TCP IP Module. This antenna ensures strong signal reception and reliable communication for your projects.

• Frequency range: 824-960MHz / 1710-1990MHz
• Gain: 2dB
• Connector: SMA male head
• Antenna length: 205mm (8 inches)
• Package includes: 1x Antenna

Upgrade your programming setup with our SOIC8 SOP8 to DIP8 EZ Programmer Adapter Socket Module. This universal adapter is compatible with various programmer series and supports a wide range of SOP8 narrow chips.

• Universal SOIC, SOP8 (EZ) SO8 to DIP8 Adapter 150mil IC
• Programmer pitch: 1.27mm
• Supports all SOP8 narrow chips
• Suitable for ALL-11 Series, ALL-100GANG, LT-48 Series, SuperPRO Series, TOP Series, and more
• Supports chips: 24CXX, 93CXX
• Box size: 2.6cm x 2.4cm x 2cm

Optimize your projects with our RCWL-0516 Microwave Radar Human Body Induction Module. This module offers 360-degree detection with a range of 5-9 meters and is equipped with the RCWL-9196 chip, providing reliable and adjustable motion sensing capabilities.

• Operating voltage: 4-28V DC
• Detection distance: 5-9m
• Operating current: 2.8mA (typical); 3mA (max)
• Transmitting power: 20mW (typical); 30mW (max)
• Output voltage: 3.2-3.4V
• Output driving capacity: 100mA
• Board size: 35.9 x 17.3mm
• 360-degree no blind angle detection
• Adjustable repeat trigger time and detection distance
• Supports night detection function

The 12V Solenoid Lock is an electronic lock designed for cabinets, safes, and doors. It features a robust electromagnet made of a big coil of copper wire with an armature (a slug of metal) in the center. When the coil is energized with 9-12VDC, the slug is pulled into the center, allowing the door to be opened. Normally, the lock remains active without consuming power, as the solenoid slug blocks the door from opening.

Key Features:

• 12V Solenoid Lock with electromagnet
• Operates on 9-12VDC
• Strong, slanted-cut slug with mounting bracket
• Designed for cabinets, safes, and doors
• Rotatable slug for versatile mounting (90, 180, or 270 degrees)

Enhance your drone's navigation with the Radiolink SE100 GPS Module. Key features include:

• High positional accuracy: 0.5m with concurrent GNSS, 2.5m with single GNSS
• Velocity precision: 0.1m/s
• Max. height: 50000m, Max. speed: 515m/s, Max. acceleration: 4G
• Update rate: 10Hz
• Sensitivity: Tracking & Nav. -167dBm, Reacquisition -163dBm, Cold start -151dBm, Hot start -159dBm
• Quick startup: Cold start time 26s, Hot start time 1s
• Voltage: 5VDC ±5%, Current: 50-55mA
• GPS UART interface, Geomagnetic I2C interface
• Compact size: 4.7 x 4.7 x 1.5cm, Weight: 103g, Cable length: 30cm

Perfect for FPV RC drones, providing reliable and precise navigation data.

• Latching Relay Design: Maintains state (on/off) without continuous power.
• Touch Control: Operated by a simple touch for user-friendly control.
• High Current Capacity: Supports up to 10A, suitable for various applications.
• Low Power Consumption: Minimal energy usage due to latching functionality.

• Double Panel PCB Design: Ensures durability and enhanced performance.
• Reliable Chip Control: Provides stable, anti-interference operation with minimal false triggering.
• Efficient Voltage Regulation: Offers stable power supply with proper heat dissipation for long-term usage.
• Anti-Reverse Protection: Prevents damage from accidental reverse power connection.

• Solid-State Relay (SSR): Offers fast and reliable switching for controlling high-voltage systems using low-voltage signals.
• Compact Size: Small and lightweight, making it easy to integrate into various applications.
• Low Trigger Voltage: Operates with an input signal voltage range of 0-1.5V for relay ON and 2.5-5V for relay OFF.
• Low Current Consumption: Very low trigger current (2mA) and quiescent current (0mA) for energy-efficient operation.

• Supports both 110V and 220V AC voltage
• Compatible with 3.3V/5V logic, making it ideal for Arduino and ESP-based projects
• Optocoupler isolation for improved safety and reliability
• Uses BTA16-600B TRIAC for efficient AC load control

• 16-channel relay module for controlling multiple devices simultaneously.
• Works with 5V DC, ideal for Arduino and microcontroller projects.
• Low state voltage (0–0.5V) activates the relay, while a high state voltage (3.7–5V) deactivates it.
• Compact and durable design for versatile applications.

• Adjustable gain of 1.5 to 1000x
• Adjustable offset
• 120kHz bandwidth (gain = 100x)
• Input signal range of 100uV – 300mV

• High-Quality Materials: Ensures durability and reliability for long-term use.
• Compact Design: Delicate and space-saving appearance for easy installation.
• Smart Circuit Control: Detects solar panel voltage to manage output without additional lighting elements.
• Automatic Functionality: Charges during the day, turns lights on at night, and off during daylight.

• Operating Voltage: 5V DC
• Max. Sensing Distance: 700 cm
• Sensing Angle: 15°
• Average Current Consumption: 2mA