The SimonK ESC 30A is a high-performance electronic speed controller designed for quadcopters and multicopters. Key features include:

• Current Rating: 30A
• BEC: 5V 2A
• Suitable Batteries: 2-3S LiPo
• Recommended BLDC Motors: A2212 brushless motor (1000kv, 1400kv, 2200kv)
• Dimensions: 45 x 24 x 11mm
• Weight: 25 grams

This package includes one SimonK 30A ESC Motor.

• KV Rating: 4600KV (RPM per Volt)
• Max Current: 43A for high performance.
• Max Watts: 600W of power for demanding applications.
• Max Voltage: Less than 14V

• High torque and fast speed at varying voltages
• Digital control for precise positioning
• Durable metal gears for longevity
• Wide voltage range (6V-8.4V)

Discover the Propeller 1045 Props 10x4.5 CW/CCW Red pair, designed to enhance the performance of your 4 copter and 6 copter drones. These red 2-blade propellers feature a 10x4.5" size, adjustable adapter rings, and are suitable for wheelbases ranging from 550mm to 700mm.

• Low power consumption at 4W.
• Operates at a speed of 5/6 rpm for slow and stable motion.
• Powered by AC220V input voltage.
• Permanent magnet structure for efficient operation.

The EMAX BLHeli Series 30A ESC for RC Multi-Rotors provides excellent performance and reliability. Built on BLHeli firmware, it includes features like low-voltage protection, over-heat protection, and throttle signal loss protection. Separate power supply for MCU and BEC enhances its ability to eliminate magnetic interference.

• Current: 30A UBEC
• Optimized BLHeli Firmware: Ensures perfect drive performance
• Protections: Low-voltage, over-heat, and throttle signal loss
• Separate Power Supply: Enhances ESC's magnetic interference elimination
• Adjustable Parameters: Via program card or transmitter
• Compatible Throttle Range: Works with different receivers
• Built-in BEC: Linear or switch options available
• Max Speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole

• High Performance: Optimized for FPV racing with extreme thrust
• Cooling Series Bell Design: Reduces motor temperature by 30%
• N52 Neodymium Magnets: Ensures better acceleration and sustained RPM
• Genuine Japanese NMB Bearings: Provides smooth and long-lasting performance

Discover the Servo Motor MG995, ideal for high-performance applications in Bangladesh. Operating at 4.8V to 7.2V, this servo motor offers excellent speed and torque, making it perfect for robotics, automation, and other precision control projects.

• Operating Voltage: Typically +5V
• Current: 2.5A (at 6V)
• Stall Torque: 9.4 kg/cm (at 4.8V)
• Maximum Stall Torque: 11 kg/cm (at 6V)

The DC 12V 5 RPM Gear Motor is a compact and efficient motor perfect for various applications. Key features include:

• Power supply: 12V
• Speed: 5 RPM
• Compact gear box motor combination
• Length: 50mm
• Height: 30mm
• Shaft Diameter: 5mm

• High efficiency for use in drones and RC vehicles.
• Lightweight and compact design.
• Robust construction for durability and long life.
• Ideal for 2-3 Lipo battery applications.

• 20KG torque output, suitable for high-load applications
• Fully metal gear construction for durability
• Dual ball bearings (2BB) for smooth operation
• 25T output spline for secure connection

• Made from aluminum for durability and light weight
• 25-tooth design for secure attachment
• M3 screws for easy installation
• Compact size with a 20mm diameter

• 180-Degree Rotation: Designed for precision-controlled movements.
• Durable Gear System: Combination of plastic and metal gears for cost-effectiveness and strength.
• High Torque: Delivers up to 11kg/cm torque at 6.6V.
• Broad Voltage Range: Operates efficiently between 4.8V and 7.2V.

• Waterproof Design: Built for reliable performance in wet conditions.
• High Torque: Capable of producing up to 70kg-cm torque at 8.4V, ideal for heavy-duty applications.
• Programmable Digital Amplifier: Equipped with a MOSFET drive for enhanced precision and durability.
• Double Ball Bearing: Ensures smooth operation with reduced noise.

Specifications:

• Command Protocol: PWM
• Operating Voltage (V): Min: 4.80 / Max: 6.00
• Weight (g): Min: 55.20
• Stall Torque (kgf•cm / oz•in): Min: 7.7 / 106.93 / Max: 9.6 / 133.32
• No Load Speed (sec/60°): Min: 0.24 / Max: 0.2
• Running Current (mA): Min: 350 / Max: 450
• Stall Current (mA): Min: n /a: Max: n /a
• Circuit: Analog
• Rotation: Standard
• Operating Voltage (V): Min: 4.80 / Max: 6.00
• Torque Range    Min (KG/CM): 9.60
• Max (N/CM): 0.00
• Max Speed (SEC/60): 0.20
• Case Size (mm): 19.80
• Dimensions (mm): 40.6 x 19.8 x 37.8
• Weight (g): 55.20
• Motor Type: Cored Metal Brush
• Potentiometer: Conventional
• Gear Material: 1 Metal-Plastic & 3 Metal
• Horn Gear Spline: 24T (Ø6)
• Case Material: Engineering Plastic

Package:

1x servo set