• Brush Speed Controller: 20A capacity, perfect for various RC models.
• Multiple Functions: Forward, reverse, and brake functions for better control.
• Motor Compatibility: Works with 130/180/260/280/380 brush motors.
• Brake: Equipped with brake on/off functionality.

• High Torque: Provides a rated torque of 16.0 Kg.cm
• Efficient Power Use: Operates at 12V DC input voltage
• Low-Speed, High-Torque Performance: 300 RPM no-load speed with 195 RPM rated speed
• Durable: Designed for long-lasting performance with high torque output

• Waterproof Design: Built for reliable performance in wet conditions.
• High Torque: Capable of producing up to 70kg-cm torque at 8.4V, ideal for heavy-duty applications.
• Programmable Digital Amplifier: Equipped with a MOSFET drive for enhanced precision and durability.
• Double Ball Bearing: Ensures smooth operation with reduced noise.

• 180-Degree Rotation: Designed for precision-controlled movements.
• Durable Gear System: Combination of plastic and metal gears for cost-effectiveness and strength.
• High Torque: Delivers up to 11kg/cm torque at 6.6V.
• Broad Voltage Range: Operates efficiently between 4.8V and 7.2V.

• Compact and lightweight design for versatile applications.
• Durable metal gearbox for enhanced reliability.
• High torque with a 300 RPM speed reduction.
• Ideal for DIY projects and robotics.

The EMAX BLHeli Series 30A ESC for RC Multi-Rotors provides excellent performance and reliability. Built on BLHeli firmware, it includes features like low-voltage protection, over-heat protection, and throttle signal loss protection. Separate power supply for MCU and BEC enhances its ability to eliminate magnetic interference.

• Current: 30A UBEC
• Optimized BLHeli Firmware: Ensures perfect drive performance
• Protections: Low-voltage, over-heat, and throttle signal loss
• Separate Power Supply: Enhances ESC's magnetic interference elimination
• Adjustable Parameters: Via program card or transmitter
• Compatible Throttle Range: Works with different receivers
• Built-in BEC: Linear or switch options available
• Max Speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole

Discover the Servo Motor SG90, a compact and lightweight motor ideal for various applications requiring precise control and reliable performance. Operating at 3.0V to 7.2V, this servo motor is perfect for robotics, automation, and DIY projects in Bangladesh.

• Wide voltage control range from AC 50V to 220V for flexible applications.
• High maximum power capacity of 2000W for heavy-duty operations.
• SCR (Silicon-Controlled Rectifier) technology for smooth and reliable voltage regulation.
• Ideal for DIY and integration projects without the protective shell for customization.

• Voltage range: 1.5V to 3V
• Vibration Speed: 1000 RPM
• Compact size: 16 x 9 x 6 mm
• Ideal for small devices and applications requiring vibration

• High torque and fast speed at varying voltages
• Digital control for precise positioning
• Durable metal gears for longevity
• Wide voltage range (6V-8.4V)

• High-Quality Digital Servo: Designed for 450-size RC helicopters.
• Metal Gear Construction: Provides durability and long-lasting performance.
• High Torque & Speed: Ensures smooth and precise control for swashplate movements.
• Wide Voltage Compatibility: Works with 4.8V to 6.0V power sources.

• 50A Brushless ESC: High-performance electronic speed controller for RC vehicles
• 3A BEC: Built-in battery eliminator circuit for stable power supply
• Bidirectional Control: Allows forward and reverse movement
• Fully Automatic: No additional setup required for easy use

• 30A brush motor ESC: Supports 130/180/260/280/380 brush motors.
• Multiple functions: Forward, reverse, and brake mode.
• Wide voltage range: Works with 3.0V-9.4V power input.
• High efficiency: Constant current of 20A, max 25A for <30s, pulsed 50A for <5s.

• Operating Voltage: Typically +5V
• Current: 2.5A (at 6V)
• Stall Torque: 9.4 kg/cm (at 4.8V)
• Maximum Stall Torque: 11 kg/cm (at 6V)

Specifications:

• Operating Voltage: 4.8V - 6.0V
• Stall Torque: 9.4kg/cm (4.8V), 11kg/cm (6.0V)
• Operating Speed: 0.17sec/60° (4.8V), 0.14sec/60° (6.0V)
• Gear Type: Metal
• Connector Type: JR/Futaba
• Dimensions: 40.7mm x 19.7mm x 42.9mm
• Weight: 55g

Package:

1x TowerPro MG996R Digital High Torque Servo Motor (180 degree)

• Constructed from durable 2mm hard aluminum
• Sandblasting oxidation finish for enhanced durability
• Lightweight design, weighing only 50g
• Professional black color for modern aesthetics