Modules & Shields

Specification:

• Light source： COB
• Color: Warm white
• CIR: >80
• Power: 20W
• Input Voltage: AC 220V-265V
• Housing Material: Aluminum
• Source Life: > 50,000 hours
• Lighting angle: 120

Package:

1x COB LED Chip Lamp 20W 220V Intelligent IC No Driver Needed LED Bulb for Flood Light Spotlight DIY Lighting 20W Warm White

Specifications:

• Mini DC Charging Fan Circuit Board
• 3 Level Speed Control & LED Indicator
• Ideal for Electrical Circuitry & Parts
• Best Choice To Replace Or Making a Mini Fan
• USB 5V Charging

Package:

1x Mini Rechargeable Fan Circuit Board with 3 Level Speed Control and Led Indicator

Specifications:

• Protocols: Bluetooth low energy 5.0
• Type: Wireless MCU
• Features: LE 1M PHY
• Peripherals: 12-bit ADC 8-channel, 2 SPI, 2 UART, 4 timers, I2C
• Rating: Catalog
• Flash memory (kByte): 256
• RAM (kByte): 8
• Number of GPIOs: 23
• Security: Cryptographic acceleration, Debug security, Device identity, Software IP protection
• Sensitivity (best) (dBm): -94
• Operating temperature range (°C)    -40 to 85

Package:

1x HC-08 Android iOS BLE 4.0 Bluetooth Module for arduino CC2540 CC2541 BLE Serial Wireless Module Compatible HM-10 HM-11

Specifications:

• Multi-function mini boost module
• Basic parameters
• The output voltage can be set to 5V/8V/9V/12V, the default is 12V
• Input voltage range: 2.5V~VOUT-0.5V
• Output performance: Take 3.7V lithium battery input as an example, it can output 5V1.2A, 8V0.7A, 9V0.6A, 12V0.5A. Make sure that the input current and output current do not exceed 1.5A.

Voltage setting description:
The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off. In the following table, 0 means the pad is disconnected and 1 means the pad is connected.

• A   B   VOUT
• 0   0   5V
• 0   1   8V
• 1   0   9V
• 1   1   12V

Package:

1x 1.5A Multi-function Mini Boost Module

Specifications:

• Module supply voltage: DC 5V
• Working environment temperature: -40 ° C ~ 85 ° C
• Communication interface: IIC
• Ultra low power consumption: programmable sample rate and LED current
• Save power; ultra-low standby current (0.7μA, typical)
• Size: 5.6mm x 3.3mm x 1.55mm

Package:

1x High Accuracy I2C MAX30105 Particle Optical Sensor Photodetectors Board Module Smoke Detection Flame Module 1.8V

Specifications:

• Measures distance data in more than 8000 times/s
• 360 Degree Omnidirectional Laser Range Scanning
• 8000 times sample rate, the highest in the current economical LIDAR industry
• OPTMAG Original Design,prolong the life-span
• Configurable Scan Rate from 2-10Hz
• Ideal for Robot Navigation and Localization
• Plug and Play

Package:

1x Slamtec RPLIDAR A1 2D 360 degree 12 meters

Enhance your electronic projects with our High-Quality RS232 to TTL Converter Module. This versatile converter is perfect for a range of applications, ensuring reliable and efficient performance.

• Widely used in radio modifications, phone flashing, XBOX360 flashing, GPS, vehicle detection, and more
• Compact size
• Operates up to 250 kbit/s
• Low supply current: 300 µA (typical)
• External power supply required

Specifications:

• Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3 megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast mode plus)
• 2-wire serial control of focus mechanism
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10

Specifications:

• Using the NTC thermistor sensor , good sensitivity
• The comparator output signal clean waveform is good , driving ability, than 15mA
• Adjust the temperature distribution bit detection threshold
• Working voltage 3.3V-5V
• The output format: Digital switching output (0 and 1)
• With bolt holes for easy installation
• Using a wide voltage LM393 comparator

Package:

1x Digital Thermal Temperature Sensor Module for Arduino (Thermistor)

Specifications:

• For Model: DS18B20
• Type: waterproof temperature sensor
• Feeler: stainless steel temperature sensor
• Temperature measuring range: -55 ° C -125 ° C
• Accuracy over the range of -10 ° C - 85 ° C: ± 0.5 ° C
• Adjustable resolution: 9 - 12 bit
• Voltage supply: 3.0 - 5.5V

Package:

1x DS18B20 Temperature Sensor Adapter Shield

• Type: YL-99 Impact Switch Module
• Product Name: YL-99 Impact Switch Module sensor for r3
• Condition: YL-99 Impact Switch Module

• LED Size: 5mm                                                                     
• Diode Color: IR / Infrared
• Lens Colour: Clear
• Wavelength: 940nm
• Transmission Modulation: 38kHz

• Operating voltage: DC12V (27A/12V battery x1)
• Operating Current: 10mA @ 12V 
• Radiated power: 10mw @ 12V
• Transmitting frequency: 315MHZ 
• Transmission distance :50-100M (Open field, the receiver sensitivity of -100dbm) 

• Supports FAT file system SD carrier
• Supports playing of 4Bit ADCPM format files
• Recognize the voice files automatically
• Support microprocessor and key control

Specifications:

• Connector Type: Micro USB to PCB
• Adapter Type: 2.54mm DIP 5 Pin
• Compatibility: Designed to interface Micro USB connectors with PCB boards
• Pin Spacing: 2.54mm
• Number of Pins: 5
• Easy Integration: Allows seamless integration of Micro USB connectivity into PCB projects
• Compact Design: Space-saving design suitable for compact electronic devices
• Material: High-quality materials ensure durability and reliability
• Versatile: Suitable for various DIY electronics projects, prototyping, and small-scale productions.

Package:

1x Micro USB to PCB 2.54mm DIP 5 P Adapter Module

• Operating voltage: 3.5-5V DC
• Current rating: 20mA
• Speaker power: 8ohm/3W
• Supported sampling rate (kHz): 8/11.025/12/16/22.05/24/32/44.1/48

• Supply voltage: 3.3 V to 5V
• Output can directly connected to controller
• TTL level output
• Maximum output current : 15mA

• Support 12 Mbps full speed USB transmission and 1.5 Mbps low speed transmission, compatible with USB V2.0.
• Serial communication baud rate can support 300000/115200/57600/38400.
• The same chip can be configured for upper computer mode and lower computer mode.
• The USB port of the upper computer conforms to the standard HID protocol and does not need to install additional drivers.

• High-quality materials for guaranteed durability
• Chip-designed card reading circuit
• Low voltage, compact contactless card reader module
• Communicates with host via SPI mode

• Supports HUB75 port full color module, including ICN2038 IC
• Supports static to 1/32S scan mode
• Control range: 768*128, with a maximum width of 1280 and height of 256
• Communication ports: Wi-Fi and U-Disk

• Supports static to 1/32S scan mode
• Wi-Fi and U-Disk communication port
• Displays full-color text, images, time, and temperature
• 999 programs with remote switch support

The ATK GPRS SIM800 Module SIMCOM is fully compatible with Arduino and microcontrollers, offering a wide range of features for your projects. Key specifications include:

• GSM module: SIM800A
• RTC backup battery
• A microphone port
• A headphone jack
• RS232 interface selection
• RS232 serial port
• Lithium battery interface
• Power input connector
• Power LED (blue)
• Power switch
• SIM card slot
• SMA antenna interfaces with a supporting small antenna
• Power On / Off button
• Network status indicator (red)

The SIM900A GSM GPRS Board + Antenna for Arduino is a robust module that ensures reliable connectivity for your projects. With a comprehensive set of features, this board is perfect for various applications. Key specifications include:

• SIM900A GSM module
• TTL level communication (cannot be directly connected to 232 level)
• SIM900A reset (active low)
• Power options: DC 5V and DC 3.3V-4.5V input
• Onboard Resources: Serial port circuit with protection, SMA antenna interface, SIM card circuit, 4*3.5 fixture hole, SIM900A serial port output terminal
• Frequency: 900 / 1800 MHz
• Working voltage: 5V
• Dimensions: 5.6 cm x 4.9 cm x 2.8 cm
• Weight: 23 g

The Ublox NEO-6M GPS Module offers high precision and sensitivity, making it ideal for various applications, including cars and other mobile setups. Key features include:

• High precision binary output
• High sensitivity for indoor applications
• Battery for power backup
• EEPROM for storing configuration settings
• Flexible mounting with ufl cable connected antenna
• Serial TTL output with four pins: TX, RX, VCC, and GND
• Configurable from 4800 Baud to 115200 Baud rates (default 9600)
• Cold start time: 38s, Hot start time: 1s
• SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
• Operating temperature: -40 to 85°C
• 5Hz position update rate
• UART TTL socket
• Dimension: 22x30x13 mm
• Weight: 12g

FID-RC522 RF IC Card Sensor Module is a reliable and efficient solution for secure access control systems. Operating at a frequency of 13.56MHz, it supports various mifare card types, ensuring compatibility and performance.

• Current: 13-26mA / DC 3.3V
• Idle Current: 10-13mA / DC 3.3V
• Sleep current: <80uA
• Peak current: <30mA
• Operating Frequency: 13.56MHz
• Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
• Environmental Operating temperature: -20-80 degrees Celsius
• Dimensions: 40mm × 60mm

Perfect for enhancing the security of your access control systems.

TCS230 Color Sensor Recognition Module is designed for precise color detection using imported TCS3200 chips and a gold-plated PCB board. It features anti-light interference and a controllable white LED.

• Imported TCS3200 chips
• Power supply: 3-5V
• Anti-light interference
• White LED with on/off control
• Detects non-luminous object colors
• PCB dimensions: 33mm x 25mm

Ideal for accurate color detection in various applications.

USBASP AVR Programmer is based on Thomas Fischl's USBasp design, offering a compact and elegant solution for microcontroller programming. Compatible with Windows, Mac OS X, and Linux, it supports a wide variety of Atmel AVR microcontrollers.

• Allows reading/writing microcontroller EEPROM, firmware, fuse bits, and lock bits
• Supports Windows, Mac OS X, and Linux
• 5 KB/sec maximum write speed
• Software-controlled SCK option for low clock speed targets
• 10-pin ISP interface (standard ISP 10-pin pinout)
• Fully signed Windows Drivers for Vista and above

Includes a 10-pin ISP cable, ideal for AVR development boards and kits.

The SIM800C GSM GPRS Development Module is perfect for integrating GSM and GPRS capabilities into your projects. Supporting a wide voltage range and various control levels, this module is versatile and easy to use.

The SIM808 GSM GPRS GPS Development Board with IPX SMA and GPS Antenna offers versatile connectivity and robust performance for your projects. Perfect for integrating GSM, GPRS, and GPS functionalities into your designs.

The 5V 4-Channel Relay Module is ideal for controlling multiple devices with a single microcontroller. With a maximum output of DC 30V/10A and AC 250V/10A, it ensures reliable switching and robust performance for various projects.