Offer


Active filters

Human Body Infrared PIR Motion Sensor Switch DC12-24V 5A /6A With DC Plug For LED Strip
  • Out-of-Stock
Availability: Out of stock
  • Wide Voltage Range: Compatible with DC 5-24V, ideal for various voltage-based systems
  • Adjustable Delay Close Time: Delay time adjustable between 33 to 300 seconds for versatile applications
  • Long Detection Range: Can detect motion from up to 4-5 meters
  • Output Connectors Included: Comes with both a DC male plug and a DC female plug for easy integration
Automatic PIR Motion Sensor Detector Switch
  • Out-of-Stock
Availability: Out of stock
  • Wide Detection Range: 120°/180° detection angle with a range of up to 12 meters (± 2m)
  • Adjustable Settings: Ambient light sensitivity and time-delay (5 seconds to 12 minutes) can be adjusted
  • High Load Capacity: Suitable for 500W resistive load (e.g., incandescent lamps) and 150W inductive load (e.g., LED, energy-saving lamps)
  • Weatherproof Design: IP44 rated, ideal for both indoor and outdoor use
AD9833 DDS Signal Generator Module Waveform Frequency Counter Monitor
  • Out-of-Stock
Availability: Out of stock
  • Digitally programmable frequency and phase
  • Supports sinusoidal, triangular, and square wave outputs
  • Wide frequency range: 0 MHz to 12.5 MHz
  • Low power consumption: 12.65 mW at 3V
Type-C 2.54mm Micro 4P USB Adapter Board Male to Female Connector Adapter
  • Out-of-Stock
Availability: Out of stock
  • Compact and Lightweight Design for easy integration
  • Supports Type-C to 2.54mm Pin Conversion for versatile connectivity
  • Stable DC 5V Operation for reliable performance
  • Wide Operating Temperature Range for durability
GY-906 MLX906 BCC DCI Infrared Temperature Sensor Module Temperature Acquisition Sensor For Arduino
  • Out-of-Stock
Availability: Out of stock
  • High-Precision Infrared Temperature Sensor with MLX90614ESF-BCC chip
  • Non-Contact Temperature Measurement for accurate readings
  • Standard I2C Communication Protocol for easy integration
  • Wide Voltage Compatibility (3V - 5V) with internal low dropout regulator
DD0315NA 3-15V to negative -12V step-down vacuum module ADC DAC LCD power supply
  • Out-of-Stock
Availability: Out of stock
  • Converts DC 3-15V input to a stable -12V output
  • High efficiency with minimal power loss
  • Low static working current for energy efficiency
  • Suitable for ADC, DAC, LCD power supply applications
GY-ADS1015 ADS1115 12Bit Analog to Digital Converter ADC Module Breakout Board
  • Out-of-Stock
Availability: Out of stock
  • 12-bit resolution for high-precision analog-to-digital conversion.
  • Programmable sample rate ranging from 128 to 3300 samples/second.
  • Wide power supply range from 2.0V to 5.5V, suitable for various microcontrollers.
NodeMCU Motor Shield Board L293D for ESP-12E from ESP8266
  • Out-of-Stock
Availability: Out of stock
  • Compatible with ESP-12E development kit (NodeMCU).
  • Extend output ports for ESP-12 including SPI, UART, GPIO, AI, and 3.3V power interface.
  • Directly drive 2-way motors with ease.
  • Power switch for convenient operation.
Mini MP1584EN DC-DC BUCK Adjustable Step Down Module 4.5V-28V Input 0.8V-20V Output
  • Out-of-Stock
Availability: Out of stock
  • Wide Input Range: Input voltage from 4.5V to 28V.
  • Adjustable Output: Output voltage range from 0.8V to 20V.
  • High Efficiency: Conversion efficiency up to 96%.
  • Compact Size: Small size of 22mm * 17mm, perfect for DIY projects.
Single Cell Lithium Battery Power Module Board 3.7V 4.2V 5V 9V 12V USB Mobile Phone Quick Charge QC2.0 QC3.0 TPS61088
  • Out-of-Stock
Availability: Out of stock
  • Efficient Charging: High-efficiency conversion up to 93%, ensuring quick charging
  • Wide Input Range: Input voltage from 2.8V to 4.5V, ideal for 3.7V polymer lithium batteries
  • Adaptive Output: Output current adapts to 5V 3A, 9V 2A, or 12V 2A based on the protocol
  • Fast Charge Protocol Support: Supports QC2.0, QC3.0, Huawei FCP, DCP Protocols
5V 18650 Lithium Battery Charger Charging Module 5V Discharger Step Up Boost Board for DIY UPS Mobile Power Bank
  • Out-of-Stock
Availability: Out of stock
  • 2-in-1 charge and discharger (boost) module
  • Charging voltage: DC 4.5V-8V (Recommended DC 5V)
  • Full charge voltage: 5V ±2%
  • LED indicator for charge status ("OK" for full charge or battery failure, "CR" for charging)
CCM5D DC6V to 30V start stop apply PWM motor regulator Variable voltage LED display panel regulator speed controller
  • Out-of-Stock
Availability: Out of stock
  • PWM Control: Uses Pulse Width Modulation (PWM) to control the speed of a DC motor, offering smooth and precise speed adjustments.
  • LED Display: Features a large 0.56 inch, 3-number LED display that shows the speed percentage from 0% to 100%, making it easy to monitor the motor speed under various conditions.
  • Adjustable Speed Range: Speed can be adjusted from 0% to 100%, suitable for DC motors or DC loads with a current draw of less than 5A.
  • Push Button: Incorporates a push button that can switch the controller between on and off states.
AM2320 Digital Temperature and Humidity Sensor I2C and one wire bus for Arduino
  • Out-of-Stock
Availability: Out of stock
  • Accurate temperature and humidity sensing
  • I2C and one-wire bus communication
  • Wide temperature measurement range (-40°C to 125°C)
  • Compact and easy to integrate with Arduino
PIR Motion Sensor Switch LED 110V-220V 100W
  • Out-of-Stock
Availability: Out of stock
  • Waterproof: IP65 rating ensures outdoor durability.
  • Wide Detection Range: 120-140 degrees for efficient motion sensing.
  • Adjustable Delay & Sensitivity: Delay can be set from 3 seconds to 15 minutes, and ambient light sensitivity from <3 to 2000LUX.
  • Versatile Installation Options: Can be installed in plane, internal angle, or outer corner.