The PICkit 3.5 Programmer & Debugger is a versatile tool designed for both programming and debugging microcontrollers. With its robust features and compatibility with MPLAB IDE, it offers:

• USB Interface: Full speed 12 Mbits/s interface to host PC.
• Real-time Execution: Allows for real-time program execution.
• MPLAB IDE Compatible: Free download from Microchip.
• Built-in Safety Features: Over-voltage and short circuit monitor.
• Firmware Upgradeable: Upgrade firmware from PC/web download.
• Totally Enclosed Design: Protects internal components.
• Diagnostic LEDs: Indicates power, busy, and error states.
• Memory Operations: Read/write program and data memory of microcontroller.
• Freeze-peripherals at Breakpoint: Control peripherals at breakpoints.
• Programmer-to-Go: Program up to 512K byte flash.

• 32-bit RGB full color LED module
• Utilizes WS2812B chips with built-in LED control
• 5050 package RGB full color highlight LEDs
• Simple control via a single IO port

• High Efficiency: Maximum conversion efficiency of 95% (5V input, 3.3V output at ~200mA).
• Wide Voltage Range: Input voltage range from 4.75V to 23V, with a selectable output voltage from 1.0V to 17V.
• High Surge and Continuous Current: 3A surge current and 1.8A continuous rated current.
• Stable Performance: 340kHz switching frequency and minimal 30mV no-load output ripple.

• 8 Bi-Directional Channels: Allows seamless voltage shifting between 3.3V and 5V logic devices.
• Automatic Direction Sensing: No need for manual configuration, simplifying circuit design.
• Compact & Lightweight: 2.6 cm x 1.6 cm in size, weighing only 2.38g.
• High-Quality PCB: Ensures reliability and durability for long-term use.

• 2 million pixels for high-quality imaging
• 160-degree wide-angle view
• Compatible with ESP32, STM32, and other IoT boards
• Easy to integrate with CSI/DVP interface

• High-resolution 8MP sensor with IMX219 for detailed imaging.
• 120° wide perspective ideal for wide-angle captures.
• High-quality static image resolution of 3280 × 2464 pixels.
• Compact and efficient design, compatible with Raspberry Pi 5.

• Low Power Consumption: Operates on a supply voltage of 2.4V-3.6V, typically 3.0V, and consumes only 0.12mA of current.
• Wide Measuring Range: Measures light intensity from 1lx to 65535lx.
• I2C Communication: Uses I2C bus for data transmission, making it easy to integrate with microcontrollers.
• High Accuracy: Offers ±20% accuracy in light measurements.

• Operates at 125KHz frequency for reliable RFID detection
• TTL level RS232 interface for easy microcontroller integration
• Low power consumption, working at <50mA
• Effective receiving range of 20-50mm, depending on the environment

The Ublox NEO-6M GPS Module offers high precision and sensitivity, making it ideal for various applications, including cars and other mobile setups. Key features include:

• High precision binary output
• High sensitivity for indoor applications
• Battery for power backup
• EEPROM for storing configuration settings
• Flexible mounting with ufl cable connected antenna
• Serial TTL output with four pins: TX, RX, VCC, and GND
• Configurable from 4800 Baud to 115200 Baud rates (default 9600)
• Cold start time: 38s, Hot start time: 1s
• SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
• Operating temperature: -40 to 85°C
• 5Hz position update rate
• UART TTL socket
• Dimension: 22x30x13 mm
• Weight: 12g

Specifications:

• Maximum Output Power: 47.5W
• Output Ports:
  • Port 1: 12V 1.5A
  • Port 2: 12V 1.5A
  • Port 3: 9V 2A
  • Port 4: 5V 2A
• Input Power: 12.6V-13.0V (2A-5A)
• Battery:
  • Type: 3S LiPo 18650 Battery
  • Input Voltage: 11.1V
  • Full Charge Voltage: 12.6V
  • Low Voltage Cutoff: 10.5V
• Voltage Tolerance: ±0.05V
• Component Type: All SMD Components
• Output Accuracy: 99%

Package:

1x Mini Router ONU UPS Board Module 40W V2.6 

• High-precision TDS measurement for water quality testing.
• Compatible with Arduino and other microcontrollers for easy integration.
• Low power consumption with a working current of just 3-6mA.
• Wide measurement range from 0 to 1000ppm.

• 800×480 high resolution for clear display
• Resistive touch control for precise input
• Supports Raspberry Pi, BB Black, and other mini-PCs
• Plug and play with Windows (driver-free)

Enhance your Arduino projects with our Rotary Encoder Module. This versatile module allows counting in both positive and reverse directions by rotating the encoder, offering unlimited rotation counts. With a built-in reset button, you can easily reset to the initial state for accurate measurements.

• Working Voltage: 5V
• Material: Electronic components + PCB
• Main Colour: Black
• Size: Approx. 25 x 20 x 30mm

Package Includes: 1 x Rotary Encoder Module

• Wide Voltage Range: Supports DC 9V to 60V for various motor applications.
• High Power Handling: Can sustain 18A continuously and control up to 20A.
• Smooth Speed Control: 0% to 100% adjustable speed for precise operation.
• Forward & Reverse Control: Easily switch motor rotation direction.

• 49E Analog Hall Effect Sensor: Detects magnetic fields with precision.
• North and South Pole Detection: Differentiates between magnetic poles effectively.
• Magnetic Field Strength Detection: Provides analog output proportional to the magnetic field strength.
• Adjustable Digital Output: Triggers digital output when the magnetic strength exceeds the adjustable set-point.

• 3.2-inch Resistive Touch Display: Allows for intuitive touch control.
• High Resolution: Offers 320 x 240 resolution for clear visuals.
• Full Compatibility: Compatible with all versions of Raspberry Pi boards (4B/3B+).
• CE & RoHS Certified: Meets safety and environmental standards for quality assurance.