The PICkit 3.5 Programmer & Debugger is a versatile tool designed for both programming and debugging microcontrollers. With its robust features and compatibility with MPLAB IDE, it offers:

• USB Interface: Full speed 12 Mbits/s interface to host PC.
• Real-time Execution: Allows for real-time program execution.
• MPLAB IDE Compatible: Free download from Microchip.
• Built-in Safety Features: Over-voltage and short circuit monitor.
• Firmware Upgradeable: Upgrade firmware from PC/web download.
• Totally Enclosed Design: Protects internal components.
• Diagnostic LEDs: Indicates power, busy, and error states.
• Memory Operations: Read/write program and data memory of microcontroller.
• Freeze-peripherals at Breakpoint: Control peripherals at breakpoints.
• Programmer-to-Go: Program up to 512K byte flash.

• Wide Input Voltage Range: 5V to 80V
• Adjustable Output Voltage: 5V to 20V
• Minimum Voltage Drop: 1V
• Maximum Switch Current: 0.8A

• High-Precision Laser Sensor: Measures absolute distance up to 2 meters
• Compact Design: Small form factor for easy integration
• I2C Communication: Simplifies connection with microcontrollers
• Wide Voltage Compatibility: Works with 3V to 5V power supply

• Measures DC current, voltage, and power with high accuracy.
• Wide operating voltage range from 3V to 5.5V.
• Supports I2C interface for easy integration with microcontrollers.
• Current sensing range of ±3.2A with a resolution of ±0.8mA.

• Waterproof and durable for outdoor use
• Operates at a DC 5V voltage with low power consumption
• Capable of measuring distances from 25cm to 4.5m
• Acoustic emission frequency of 40kHz for accurate distance detection

• Triple output: 3.3V, 5.0V, and 12V
• 3.3V and 5V outputs with +/-0.05V tolerance
• 800mA max load current for 5V output
• Easy to use with multiple input and output pins

• Quad-band: 850/900/1800/1900MHz for global GSM network compatibility
• Connects to any global GSM network using a 2G SIM
• Voice calls: Make and receive calls using a headset or external speaker and microphone
• SMS: Send and receive SMS messages

• Multiple Communication Interfaces: Supports I2C, SPI, and HSU (High-Speed UART) for versatile connectivity.
• Wide Voltage Compatibility: I2C and UART support 3.3V ~ 24V TTL, while SPI operates with 3.3V TTL and on-board resistors for added safety.
• Built-in PCB Antenna: Provides a communication distance of 4cm to 6cm, making it convenient for near-field applications.
• Dual Operation Modes: Functions as both an NFC module and an RFID reader/writer.

• Integrated Cold Junction Compensation: Ensures accurate temperature measurement with built-in cold junction compensation.
• High-Resolution Output: Provides 12-bit resolution, allowing temperature readings from 0°C to 1024°C with a 0.25°C resolution.
• Thermocouple Break Detection: The module includes a circuit to detect thermocouple breaks, ensuring reliable operation.
• K-Type Thermocouple: Compatible with a K-type thermocouple, ideal for high-temperature measurements.

• 1 channel relay interface board
• Uses NE555 chip for timer control
• Adjustable delay time from 0 to 10 seconds
• Control voltage: AC 0~250V/max. 10A, DC 0-30V/max. 10A

• Operating Voltage: 3.2V ~ 5.5V (with recommended diode for voltages above 4.5V)
• Default Communication Distance: 600m (adjustable up to 1000m)
• Air Baud Rate: 5000bps
• Idle Current: 16mA

• Utilizes LoRa™ Spread Spectrum modulation technology
• Constant RF power output at +20dBm (100mW)
• High sensitivity down to -148dBm
• Half-duplex SPI communication

• Based on the SX1278 IC from SEMTECH
• Utilizes LoRa spread spectrum technology for enhanced range
• Functions as both a transmitter and receiver
• Ideal for long-distance wireless communication

• Wide Frequency Range: Operates at 433MHz, suitable for long-range wireless communication.
• Multiple Modulation Options: Supports FSK, GFSK, MSK, and LoRa modulation for versatile transmission.
• High Sensitivity: With a sensitivity of -136dBm, it allows long-range communication even in weak signal environments.
• High Output Power: Provides an output power of +20dBm, enhancing transmission range and reliability.

• Qi Standard for universal compatibility.
• Input: 5V 2A for efficient power delivery.
• Output: 5V 1A for reliable charging.
• Transmission Distance: 2-8mm for flexible placement.

• 3 USB Expansion Ports: Onboard 3 USB expansion ports, compatible with USB 2.0/1.1 for data transmission.
• RTL8152B Ethernet Chip: Features an RJ45 network port with 10/100M adaptive Ethernet connectivity.
• Multiple Indicators: Includes power (PWR), network port status (ACT), and USB expansion interface status (D1~D3).