• Wide Input Voltage Range: Operates with DC 5V to 12V input voltage.
• High Power Output: Delivers 120W of power for induction heating.
• Efficient Induction Heating: Designed for high-frequency induction heating applications.
• Compact Size: 8x4cm in size, easy to integrate into various setups.

Introducing the PAM8403 Super Mini Digital Amplifier Board, a compact and efficient solution for audio enhancement. This Class D digital amplifier offers 2 x 3W output power with a voltage range of 2.5V to 5V, making it perfect for various digital products. Its small size and high-quality sound reproduction make it an excellent choice for DIY projects and professional applications.

Key Features:

• Output Power: 2 x 3W
• Class D Digital Amplifier
• Voltage Range: 2.5V to 5V
• Compact Size: 1.85 x 2.15cm
• High Sound Quality
• Low THD and Noise
• Short Circuit Protection
• Thermal Shutdown

• Compact Size: With a size of 8.6mm x 12.33mm, this module is small and suitable for tight spaces.
• Low Input Voltage: Accepts input voltages ranging from 4.2V to 10V.
• Stable Output: Provides a stable 3.3V output with a current output of 800mA.
• Efficient Power Conversion: Ideal for stepping down voltage in small electronic projects.

• High-precision TDS measurement for water quality testing.
• Compatible with Arduino and other microcontrollers for easy integration.
• Low power consumption with a working current of just 3-6mA.
• Wide measurement range from 0 to 1000ppm.

The SIM800C GSM GPRS Development Module is perfect for integrating GSM and GPRS capabilities into your projects. Supporting a wide voltage range and various control levels, this module is versatile and easy to use.

• Supports MP3, WAV, and WMA formats
• TF card (up to 32GB) and U Disk support
• 30 volume levels and 6 EQ levels adjustable
• Multiple control modes (IO, serial, AD button)

• Model: HBV-1466FF
• Highest resolution: 2592 x 1944
• Field of view: 60°
• Chip: OV5640 (1/4")

• 9-Axis Motion Tracking: Includes a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer.
• High Sensitivity & Accuracy: Gyroscope up to ±2000°/sec, accelerometer up to ±16g, and magnetometer up to ±4800µT.
• Built-in Digital Motion Processor (DMP): Enables motion sensing without complex calculations.
• Onboard 3.3V Voltage Regulator: Allows operation from 5V sources.

• Dual Motor Drive: Supports two DC motors with up to 2A current per channel.
• Wide Voltage Range: 6.5V–12V (VIN Power Supply), 4.8V–35V (External Power).
• PWM Speed Control: Supports precise motor speed control.
• PLL Advanced Speed Control: Ensures smooth motor operation.

• Imported normally-open reed switch for reliable performance
• Comparator output with clear signal and clean waveform
• High driving ability with more than 15mA output

• High sensitivity IR receiver
• Extremely sensitive to wavelengths between 760-1100nm
• Power supply indicator lamp
• Comparator output indicator lamp

• Wide Voltage Input from 8V to 24V for versatility
• Adjustable Frequency Signals ranging from 5.4kHz to 160kHz, 540Hz to 16.6kHz, and 80Hz to 2.4kHz
• Compact and Lightweight design, with a weight of only 15g
• Enhanced Speed Regulation for stepper motor drivers

• 1.5-inch RGB OLED display with 128x128 resolution
• 65K high-color (16-bit) depth for vibrant visuals
• Supports both 4-wire SPI and 3-wire SPI interfaces
• Wide viewing angle of over 160°

The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

• Onboard TTP224 capacitive touch sensor IC
• Supports 4 touch keys for multi-button applications
• Flexible working voltage: 2.4V - 5.5V
• Adjustable output modes and key output modes

• WS2812 Chip: Integrated, addressable RGB LEDs.
• 5050 RGB LEDs: Full-color highlighting for vibrant lighting effects.
• 5V Operation: Works efficiently with a 5V power supply.