Specifications:

• Working Voltage: DC 4V - 60V
• Trigger Signal Source:
  • High-Level Trigger: DC 3.0V-24V
  • Low-Level Trigger: DC 0.0V-0.6V
• Output Power:
  • Voltage: DC 4V-60V
  • Current: 10A at room temperature, up to 15A with additional heat dissipation
  • Power: 600W
• Signal Frequency Support: 0-2.5KHz
• Operating Temperature: -40°C to 85°C
• Size: 4.6 x 2.9 x 1.5 cm

Package:

1x High Power 600W MOS Tube FET Trigger Drive Module PWM Control High/Low Level Trigger Switch DC 4V-60V 5V 12V 24V

• Quad-band GSM: 850/900/1800/1900 MHz
• GPRS multi-slot class 12/10
• Supports A-GPS with Integrated GPS/CNSS
• Controlled via AT commands

• Measures both AC and DC currents up to 5A.
• Linear voltage output from 0 to VCC, centered at VCC/2 at 0A.
• High sensitivity of 185mV/A for precise measurements.
• Compact design for easy integration.

• Wide Voltage Range: Supports a working voltage of 80 ~ 260VAC for various voltage applications.
• High Power Measurement: Can measure up to 100A current and 22000W power, making it ideal for high-power applications.
• Multiple Measurements: Measures Watt (power), Volt, Ampere (current), and Frequency for a complete understanding of the electrical system.
• Accurate: Provides a measurement accuracy of 1.0 for reliable readings.

• Type: YL-99 Impact Switch Module
• Product Name: YL-99 Impact Switch Module sensor for r3
• Condition: YL-99 Impact Switch Module

✔ High Precision Measurement – Onboard precision micro current transformer for accurate current sensing
✔ Op-Amp Circuit Board – Provides accurate signal sampling and appropriate compensation
✔ Adjustable Output – The analog output corresponding to current can be easily adjusted
✔ Wide Working Voltage – Operates within a range of DC 5-30V for versatile

• Adjustable voltage step-up converter for 18650 Li-ion batteries
• Supports both charging and discharging functions
• Compact PCB module design
• Ideal for DIY power bank projects

• Supports working voltages of 6-30V and micro USB 5.0V power supply
• High-level trigger (3.0V-24V) for signal input
• Adjustable timing range from 0.1s to 999 minutes
• Can control equipment up to DC 30V 5A or AC 220V 5A

Key Features:

• Max output power: +20 dBm
• Working current in transmit mode: 115mA
• Working current in receiver mode: 45mA
• Current in standby mode: 4.2µA
• Operating temperature: -20 to 70 degrees Celsius
• Receiver sensitivity: -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
• PA gain: 20dB
• LNA gain: 10dB
• LNA noise figure: 2.6dB
• Antenna gain: 2dBi
• 2M rate range: 520 meters

• 16 characters by 2 lines black-on-green display.
• Uses the widely known HD44780 parallel interface chipset.
• Freely available interface code for easy integration.
• Blue backlight with white text for better visibility.

• Motor Control Modes: Operates in CW, CCW, short-brake, and stop modes to control two DC motors.
• PWM Speed Control: Each motor’s speed is controlled via a PWM signal, up to a frequency of 100 kHz.
• Power Supply: VM up to 15V max for the motor, and VCC range of 2.7V-5.5V for logic supply.
• High Output Current: Rated output current of 1.2A (average), with a peak of 3.2A.

• Magnetic encoder induction angle sensor
• Wide operating temperature range: -40°C to 125°C
• Low power consumption with 3.3V DC power supply
• Compact size, ideal for various applications

• 2-digit 7-segment LED display with red illumination for clear visibility
• Common Anode (C.A.) configuration for ease of integration into electronic circuits
• Brightness of 1.0 mcd @ 10mA, offering good visibility even in low-light environments
• Right-hand side decimal point location, ideal for numerical displays and counters

• Input Voltage Range: 3V to 35V DC
• Output Voltage Range: 3.5V to 35V DC
• High Efficiency: 96.7% (Maximum)
• Output Current: 6A Max

Introducing our I2C Logic Level Shifter Bi-Directional Four-way module, designed for seamless two-way logic level transformation. This compact module measures just 1.5cm x 1.3cm and includes a 1x12 pin header for easy soldering. Perfect for use with breadboards, it supports high voltage to low voltage transformations (e.g., 5V to 3.3V).

Key Features:

• 4 channels for bi-directional logic level shifting
• Compact size: 1.5cm x 1.3cm
• Includes 1x12 pin header for easy soldering
• Compatible with breadboards
• Supports high voltage (5V) and low voltage (3.3V) levels

The HC-08 Bluetooth Module Breakout is perfect for wireless communication projects. Key features include:

• Supports Bluetooth 4.0 BLE protocol for low energy consumption.
• 2.4GHz frequency for reliable communication.
• Compact design with easy integration.
• Supports AT commands for flexible configuration.