• 512MB RAM for enhanced performance
• Ideal for multimedia, high-memory, and mobile applications
• HDMI port, SD memory card slot, and Ethernet port
• Supports Android 4.0 operating system

• Brand: u-blox
• Model: NEO-6M
• Update Rate: 10Hz
• Built-In Antenna: 25 x 25 x 4mm ceramic patch antenna

• Control 16 PWM outputs using just two I2C pins
• Stackable up to 62 shields for a total of 992 PWM outputs
• Built-in PWM driver with clock, no need for continuous signals
• 5V compliant, allowing control from a 3.3V

• Supply voltage: 3.3 V to 5V
• Output can directly connected to controller
• TTL level output
• Maximum output current : 15mA

Specifications:

• Maximum Supported Chips: 4000+
• Communication Interface: USB Type-C
• Output Voltage: Programmable, 3.3V to 5.0V
• Pin Interface: 28-pin zero pull-out force locking seat
• Dimensions: 108 x 76 x 21 mm
• Weight: Lightweight and compact
• Operating Systems Supported: Win7, Win8, Win10, Win11
• Battery Percentage Indicator: 100%, 75%, 50%, 25%
• Protection Features: Short circuit, overcurrent, high voltage, and polarity protection
• Component Type: All SMD components

Package:

1x Programmer set

• Durable Material: Made from high-quality ABS plastic for long-lasting protection
• Perfect Fit: Designed specifically for Raspberry Pi 4 Model B
• Efficient Cooling: Comes with ventilation holes for better heat dissipation

• High-quality SIM808 module for GSM, GPRS, GPS, and Bluetooth communication
• Supports quad-band 850/900/1800/1900MHz for global compatibility
• Integrated GPS with A-GPS support for enhanced positioning
• AT command control for SMS, phone calls, GPRS, and GPS data

• All GPIOs can be configured as external interrupt input and wake-up source
• One full-duplex UART with a maximum rate of 3 Mbps
• Supports I2C, DAC, PWM, and multiple interfaces
• Built-in 242 KB high-speed SRAM

• Wide Detection Range: 120°/180° detection angle with a range of up to 12 meters (± 2m)
• Adjustable Settings: Ambient light sensitivity and time-delay (5 seconds to 12 minutes) can be adjusted
• High Load Capacity: Suitable for 500W resistive load (e.g., incandescent lamps) and 150W inductive load (e.g., LED, energy-saving lamps)
• Weatherproof Design: IP44 rated, ideal for both indoor and outdoor use

• Dot Laser for precise applications
• Low Power Consumption at 5mW
• Compact Design with a 6mm OD for easy integration
• Stable Operation at a 650nm wavelength

• Compact Design: Ideal for small projects with limited space.
• Versatile Power Options: Supports 5V, 3.3V, 12V, and other input voltages.
• Reliable Output: Provides a high signal when pressed and low when not.
• Simple Connection: Easy to integrate into various circuits and applications.

• Utilizes a 24-bit high precision HX711 A/D converter chip
• Includes an integrated 128 times programmable gain amplifier
• Supports two analog input channels
• Ideal for pressure and weighing sensor applications

• Based on ESP-8266EX chip for enhanced Wi-Fi functionality.
• Compatible with Arduino IDE for easy programming.
• 11 x I/O pins for various input/output operations.
• 1 x ADC pin with input range of 0-3.3V for analog inputs.

• Input Voltage: 6V to 40V DC (Recommended: 10V to 40V)
• Output Voltage: 1.2V to 36V DC
• Output Current: 20A max., 15A recommended
• Efficiency: 95% (at 24V to 12V, 20A)

• Complete kit for beginners and prototyping projects
• Includes R3 board, sensors, modules, and various components
• Ideal for learning and experimenting with electronics
• Compatible with Arduino IDE

The PIC16F877A is one of the most renowned microcontrollers in the industry, known for its convenience and ease of programming. This microcontroller uses FLASH memory technology, allowing it to be written and erased multiple times. With a total of 40 pins, including 33 for input and output, it is widely used in various PIC microcontroller projects and digital electronics circuits.