✔ Supports 1MB/S Operating Rate – Ideal for high-speed communication
✔ ISO-11898 Standard Compliant – Meets the physical layer requirements for CAN
✔ Compatible with 12V and 24V Systems – Versatile for different voltage systems
✔ Slope External Control – Reduces RFI (Radio Frequency Interference)

• Provides easy sensor and actuator connections to Arduino boards
• Supports I2C and UART interfaces (jumper selectable)
• Offers 13 digital pins, plus VCC and GND for power
• Compatible with Arduino Uno, Arduino Leonardo, and derivatives

• Bidirectional Current Measurement: Accurately measures current flow in both directions, ideal for monitoring power consumption.
• I2C Interface: Simple integration into projects using I2C communication, making it suitable for a wide range of applications.
• Wide Voltage Range: Supports bus voltages from 0V to 26V, allowing flexibility in various electronic setups.
• Compact Design: Small footprint (25.5mm x 22.3mm) makes it easy to incorporate into tight spaces within your projects.

• I2C Interface: Enables easy communication with the WeMos D1 Mini.
• Wide Power Supply Range: Supports up to 15V DC motor power supply.
• High Current Output: 1.2A (average), 3.2A (peak) per channel.
• Motor Control Modes: Supports CW, CCW, short brake, and stop modes.

• High-Performance Processor: Broadcom BCM2711 quad-core Cortex-A72 (1.5GHz)
• Large Memory: 8GB LPDDR4 RAM for improved multitasking
• Dual 4K Display Support: Two micro HDMI ports supporting up to 4Kp60
• Fast Connectivity: Gigabit Ethernet, Dual-band WiFi 5, Bluetooth 5.0 BLE

• LCD Display for easy programming and time control
• Programmable Timer to automate power switching
• 220V Compatibility, suitable for home and industrial use
• Reliable Time Relay, ideal for street lamps, billboards, and automation systems

The ATmega328P-PU is a low-power CMOS 8-bit microcontroller from Microchip, based on the AVR enhanced RISC architecture. This microcontroller is designed to deliver high performance while maintaining low power consumption, making it ideal for a wide range of embedded applications. By executing powerful instructions in a single clock cycle, the ATmega328P achieves throughputs approaching 1 MIPS per MHz, allowing system designers to optimize power consumption versus processing speed.

• One-button operation for easy countdown timer setting.
• Wide time setting range from 1 to 999 minutes.
• Controls devices with 12V DC output.
• High control capacity of 10A for powerful devices.

• Control 16 PWM outputs using just two I2C pins
• Stackable up to 62 shields for a total of 992 PWM outputs
• Built-in PWM driver with clock, no need for continuous signals
• 5V compliant, allowing control from a 3.3V

• Imported normally-open reed switch for reliable performance
• Comparator output with clear signal and clean waveform
• High driving ability with more than 15mA output

• Wireless Standard: 802.11 b/g/n
• Operating Modes: STA, AP, STA + AP
• Built-in TCP/IP Protocol Stack for multiple TCP Client connections (5 MAX)
• GPIO Ports: D0 ~ D8, SD1 ~ SD3 (15mA drive capability)

• Model: E01-ML01DP5
• Interface: SPI
• Power: 20dBm
• Distance: 2100m

• Condition: 100% Brand New with High Quality.
• Compact Size for easy integration.
• LM2596S Converter IC for efficient operation.
• Output Voltage Adjustment: Easily adjustable using a potentiometer.

• Wide Voltage Range: Operates with an input voltage of 3.3V to 5.5V, making it compatible with various systems.
• Accurate Measurement: Provides TDS (Total Dissolved Solids) measurement range of 0-1000ppm with ±10% accuracy at 25°C.
• Low Power Consumption: 3-6mA working current, ensuring energy efficiency.
• Waterproof Probe: Includes a waterproof TDS probe for reliable outdoor or aquatic use.

Discover the Arduino Uno R3 with SMD Atmega328 IC, a versatile microcontroller board designed for various electronic projects in Bangladesh. Operating at 5V with a recommended input voltage of 7-12V, it features 14 digital I/O pins, 6 PWM outputs, and 6 analog inputs, making it perfect for DIY electronics and prototyping.

• High Detection Range: Adjustable detection distance between 2m to 16m with the adapter plate or reference circuit.
• Low Power Consumption: Operating current of 50mA max. and typical average current of 2mA at 5% DC.
• Microwave Frequency: 10.525GHz helium emission frequency for efficient detection.
• High Sensitivity: Sensitivity up to -86dBm with 3Hz to 80Hz bandwidth.