• Imported normally-open reed switch for reliable performance
• Comparator output with clear signal and clean waveform
• High driving ability with more than 15mA output

• 1 channel relay interface board
• Uses NE555 chip for timer control
• Adjustable delay time from 0 to 10 seconds
• Control voltage: AC 0~250V/max. 10A, DC 0-30V/max. 10A

✔ Supports 1MB/S Operating Rate – Ideal for high-speed communication
✔ ISO-11898 Standard Compliant – Meets the physical layer requirements for CAN
✔ Compatible with 12V and 24V Systems – Versatile for different voltage systems
✔ Slope External Control – Reduces RFI (Radio Frequency Interference)

Specifications:

• Lens type: Standard M12
• Processor: NXP LPC4330, 204 MHz, dual-core
• Power Input : USB input (5V) or unregulated input (6V to 10V)
• Lens field-of-view: 80° horizontal, 40° vertical
• RAM: 264K bytes
• Flash: 2M bytes
• Length (mm): 38
• Width (mm):42
• Height (mm): 15.3
• Weight (g): 70

Package:

1x Pixy 2.1 Smart Vision Sensor-Object Tracking Camera

• 2MP OV2640 camera sensor for sharp image capturing.
• CSI/DVP interface for seamless integration with IoT boards.
• Compatible with ESP32-CAM, ESP-EYE, STM32 (F4/F7), and other IoT boards.
• 66-degree field of view for versatile applications.

• Operating Voltage: 5V DC
• Max. Sensing Distance: 700 cm
• Sensing Angle: 15°
• Average Current Consumption: 2mA

• Dual Motor Drive: Supports two DC motors with up to 2A current per channel.
• Wide Voltage Range: 6.5V–12V (VIN Power Supply), 4.8V–35V (External Power).
• PWM Speed Control: Supports precise motor speed control.
• PLL Advanced Speed Control: Ensures smooth motor operation.

The ATmega128A is a high-performance, low-power 8-bit AVR RISC-based microcontroller from Microchip. It combines a wide range of features, making it suitable for various embedded applications. Here are the key specifications and features:

• Provides a single-chip solution for upgrading RS232 devices to USB interface.
• Suitable for a variety of applications, including industrial control and data transfer.
• Compatible with Windows, macOS, and Linux operating systems.
• Compact and lightweight design for easy integration.

• Supports up to 80 voice commands, each up to 1500ms long.
• Can recognize a maximum of 7 voice commands simultaneously.
• High accuracy (99%) in ideal conditions.
• Easy to control via UART or GPIO.

• DC-DC Step-Up BOOST Module: Converts DC voltage from 1.5V-12V to 12V output with high efficiency.
• High Efficiency: Efficiency ranges from 57% to 92%, ensuring effective power conversion.
• Wide Input Voltage Range: Works with input voltage between 1.5V and 12V, making it versatile for various applications.

• Built-in Antenna – Comes with an integrated antenna for GPS signal reception.
• Baud Rate – Default baud rate of 9600bps, without battery installed.
• Wide Power Supply Range – Operates between 3-5V, making it suitable for various setups.
• EEPROM Storage – Stores all settings and data, even when power is off.

• Supports MP3, WAV, and WMA formats
• TF card (up to 32GB) and U Disk support
• 30 volume levels and 6 EQ levels adjustable
• Multiple control modes (IO, serial, AD button)

• Excellent value for money
• Compact size, easy to integrate with other products
• Supports DC 5V-12V power supply
• 1 analog input (3.2V max input)

• Supports HUB75 port full color module, including ICN2038 IC
• Supports static to 1/32S scan mode
• Control range: 768*128, with a maximum width of 1280 and height of 256
• Communication ports: Wi-Fi and U-Disk

• Integrated ESP32-S2FH4 chip with advanced Xtensa single-core 32-bit LX7 microprocessor.
• Equipped with 128KB ROM and 320KB SRAM for efficient processing.
• Includes 16KB RTC SRAM for low-power applications.
• Built-in 40MHz crystal oscillator for stable operation.