• High-performance microcontroller with dual-core Arm Cortex-M0+ running up to 133 MHz.
• Large memory capacity with 264KB on-chip SRAM and 2MB onboard QSPI Flash.
• Versatile connectivity with 26 GPIO pins, including 3 analogue inputs, 2 UARTs, 2 SPIs, 2 I2Cs, and 16 PWM channels.
• Flexible power input range from 1.8V to 5.5V DC, suitable for various applications.

• Supports Wi-Fi IEEE 802.11 b/g/n protocol with up to 150 Mbps data rate.
• Dual-band Wi-Fi with 20 MHz and 40 MHz bandwidth in the 2.4 GHz band.
• Bluetooth 5 support with Low Energy (LE) and Mesh functionality.
• Supports up to 4x Virtual Wi-Fi interfaces for flexible networking.

IR Transmitter Module:

• Supply Voltage: 5V
• Wavelength: 940nm

IR Receiver Module:

• High Sensitivity 1838 remote control receiver
• Working Voltage: 5V

• Based on the SX1278 IC from SEMTECH
• Utilizes LoRa spread spectrum technology for enhanced range
• Functions as both a transmitter and receiver
• Ideal for long-distance wireless communication

• Compact and Lightweight ideal for small projects
• 5V DC Working Voltage easy to power with standard supply
• Short Detection Range suitable for detecting small metallic objects
• Simple to Use with clear instructions for connection

• Automatically controls temperature, activating when below or above the set value.
• Supports both high and low-temperature triggering modes.
• Directly drives the relay to control AC (220V) or DC (30V) devices.

• Connects Arduino or other microcontroller projects to a WiFi network.
• Prototype IoT products with just a few Lua script lines.
• Fast development with NodeMCU Firmware.
• Built-in Micro-USB port, flash, and reset switches.

• LED Size: 5mm                                                                     
• Diode Color: IR / Infrared
• Lens Colour: Clear
• Wavelength: 940nm
• Transmission Modulation: 38kHz

• High Power Output: Supports up to 1500W with a maximum current of 30A
• Wide Input Voltage Range: Accepts DC 10V - 60V input
• Adjustable Output Voltage: 12V - 90V continuously adjustable
• Constant Current Mode: Adjustable 0.8A - 20A

✔ Supports 1MB/S Operating Rate – Ideal for high-speed communication
✔ ISO-11898 Standard Compliant – Meets the physical layer requirements for CAN
✔ Compatible with 12V and 24V Systems – Versatile for different voltage systems
✔ Slope External Control – Reduces RFI (Radio Frequency Interference)

• Nine Gesture Recognition Modes: Includes Up, Down, Left, Right, Push, Pull, CW, CCW, and Wave gestures.
• High Gesture Speed: Gesture speed ranges from 60°/s to 600°/s in Normal Mode and 60°/s to 1200°/s in Gaming Mode.
• Proximity Detection: Built-in proximity detection for improved performance.

• Input Voltage Range: 3V to 35V DC
• Output Voltage Range: 3.5V to 35V DC
• High Efficiency: 96.7% (Maximum)
• Output Current: 6A Max

• Strong Driving Capability: Uses L298N chip to provide reliable motor driving power.
• Low Heat Generation: Designed for efficient and cool operation.
• High Anti-Interference: Built with excellent anti-interference capabilities.
• Built-in Voltage Regulator: 78M05 regulator ensures proper power conversion.

• Wide Input Voltage Range: 6V to 32V
• Output Voltage: Default 5V, automatically adjusts between 3V to 12V when fast charge is triggered.
• Output Power: 24W (5V, 3.4A; 9V, 2.5A; 12V, 2A)
• Conversion Efficiency: 90% to 97%

Specifications:

• Type: WS2812 Lamp Bead Driver Board
• Voltage: 5V
• Color Modes: Full color, running water, seven color gradient, dazzle RGB
• Control: Microcontroller connection
• Wiring: Positive power line (+5V/VCC), ground wire (GND), signal line (DI)

Package:

1x Phantom Controller

• 16-channel relay module for controlling multiple devices simultaneously.
• Works with 5V DC, ideal for Arduino and microcontroller projects.
• Low state voltage (0–0.5V) activates the relay, while a high state voltage (3.7–5V) deactivates it.
• Compact and durable design for versatile applications.