• Input Voltage: DC 8.5V to 48V
• Output Voltage: 10V to 50V (Continuously adjustable)
• Output Current: 0.2A to 8A (Constant Current Range)
• Conversion Efficiency: Up to 96%

• High-frequency clock signal generator with square wave output.
• Compatible with Arduino SCM & DIY kits.
• Wide logic voltage range of 3.3V to 5V.
• Designed with high-quality PCB material for durability.

• Operates at 125KHz frequency for reliable RFID detection
• TTL level RS232 interface for easy microcontroller integration
• Low power consumption, working at <50mA
• Effective receiving range of 20-50mm, depending on the environment

• Low Power Consumption: Consumes only 50 mA of current
• Wide Frequency Band: Operates at 2.4 GHz for reliable communication
• Adjustable Communication Speed: Supports speeds from 9600 to 115200 bps
• Operational Range: Can work within an 8–10 meter range

• Simple DIY kit for creating a flowing light effect
• Adjustable flow rate with the R4 LED light adjustment
• Compatible with supply voltages from 2.5V to 14.5V
• Compact board size (53mm x 19mm) for easy installation

• Can detect multiple gases: CO, NO2, C2H5OH, H2, NH3, and CH4
• High sensitivity with ppm detection range
• Compact design for easy integration in various applications
• Low power consumption

• Wide voltage input range from 6V to 35V
• Quick Charge 3.0 support for fast and efficient charging
• Built-in MOS tube for anti-reverse connection protection (better than traditional diodes, preventing overheating and damage)
• Blue LED output indicator and Red LED quick charge status indicator

• Embedded 24-bit A/D Converter: Ensures high precision for weight measurements.
• High Precision Weight Module: Accurate and reliable sensor for weight detection.
• Easy Installation: Bolt holes provided for simple mounting.
• Low Current Consumption: Operating current is less than 10mA.

Product Overview: The Arduino Uno - R3 (Original) Italy is a powerful microcontroller board based on the ATmega328P, designed for a variety of electronics projects. It’s ideal for both beginners and professionals.

Key Features:

• Microcontroller: ATmega328P
• Operating Voltage: 5V
• Input Voltage (recommended): 7-12V
• Input Voltage (limit): 6-12V
• Digital I/O Pins: 14 (6 provide PWM output)
• PWM Digital I/O Pins: 6
• Analog Input Pins: 6
• DC Current per I/O Pin: 20 mA
• DC Current for 3.3V Pin: 50 mA
• Flash Memory: 32KB (0.5 KB used by bootloader)
• SRAM: 2 KB
• EEPROM: 1 KB
• Clock Speed: 16 MHz
• LED_BUILTIN: 13
• Dimensions: 68.6 mm x 53.4 mm
• Weight: 25 g

• 24pcs 5050 RGB LEDs with WS2812 chip for full-color effects
• Individually addressable LEDs with digital control
• Operates at 5V, making it energy-efficient

• Triple output: 3.3V, 5.0V, and 12V
• 3.3V and 5V outputs with +/-0.05V tolerance
• 800mA max load current for 5V output
• Easy to use with multiple input and output pins

• Wide Input Voltage Range: 4.2V to 40V.
• Adjustable Output Voltage: Ranges from 1.2V to 37V.
• High Output Current: Minimum 1.5A, typical 2.2A.
• Wide Operating Temperature: Ranges from -55°C to +150°C.

Specifications:

• Maximum Supported Chips: 4000+
• Communication Interface: USB Type-C
• Output Voltage: Programmable, 3.3V to 5.0V
• Pin Interface: 28-pin zero pull-out force locking seat
• Dimensions: 108 x 76 x 21 mm
• Weight: Lightweight and compact
• Operating Systems Supported: Win7, Win8, Win10, Win11
• Battery Percentage Indicator: 100%, 75%, 50%, 25%
• Protection Features: Short circuit, overcurrent, high voltage, and polarity protection
• Component Type: All SMD components

Package:

1x Programmer set

• Simplifies design efforts, lowers system costs, and reduces design time.
• Converts platinum RTD resistance to digital values efficiently.
• Supports 100Ω to 1kΩ platinum RTDs (PT100 to PT1000).
• Compatible with 2-, 3-, and 4-wire sensor connections.

• 2 million pixels for high-quality imaging
• 160-degree wide-angle view
• Compatible with ESP32, STM32, and other IoT boards
• Easy to integrate with CSI/DVP interface

• 9-Axis Motion Tracking: Includes a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer.
• High Sensitivity & Accuracy: Gyroscope up to ±2000°/sec, accelerometer up to ±16g, and magnetometer up to ±4800µT.
• Built-in Digital Motion Processor (DMP): Enables motion sensing without complex calculations.
• Onboard 3.3V Voltage Regulator: Allows operation from 5V sources.