- Multi-functional maintenance tester for frontline maintenance personnel
- Supports various testing modes: 5V mode, 3.3V mode, automatic mode, etc.
- Compatible with 74ch series, 74ls series, osmo series, CD4000 series, HEF400 series, 4500 series, and more
- Built-in database with over 1300 chip data models and 420 transistor data models
All Cattegories
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module
- Write a review
Model: 4569
- L9110S-chip motor driver
- Supports driving two DC motors or a 4-wire 2-phase stepper motor
- Ultra-small PCB size for easy integration
- Fixed mounting holes with a 3mm diameter for secure installation
Data Protection.
Delivery all over Bangladesh.

Guarantee safe & secure checkout
Specifications:
- Motor Driver Chip: L9110S
- Supply Voltage: 2.5V - 12V
- Suitable Motor Range: Operates with motors having an operating voltage between 2.5V - 12V, maximum current up to 0.8A
- Motor Types Supported: Two DC motors or 4-wire 2-phase stepper motor
- PCB Size: 2.8cm x 2.1cm (ultra-small)
- Mounting Holes: 3mm diameter
Package:
- 1x L9110S Stepper Motor Driver Board DC Stepper Motor Board H-Bridge Double DC Motor Module
Description:
The L9110S Stepper Motor Driver Board is designed to drive two DC motors or a 4-wire 2-phase stepper motor. It is equipped with the L9110S chip and supports a wide operating voltage range from 2.5V to 12V. The ultra-small PCB size (2.8cm x 2.1cm) allows for easy integration into compact projects. The module also features fixed mounting holes, making it easy to attach to your project setup. With a maximum current capacity of 0.8A, this board is ideal for driving small motors in robotics and other applications.
FAQ:
-
What motor types can this driver support?
This driver supports two DC motors or a 4-wire 2-phase stepper motor. -
What is the operating voltage range for the motor?
The operating voltage range for the motor is between 2.5V and 12V. -
What is the maximum current supported by this module?
The maximum operating current supported is 0.8A. -
What is the size of the PCB?
The PCB size is 2.8cm x 2.1cm, which is very compact for integration. -
Does the module have mounting holes?
Yes, the module has fixed mounting holes with a 3mm diameter for secure installation.
L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module from ElectronicsBD. We have a large collection of the latest L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module in Bangladesh (BD) ?
The latest and special price of L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module in Bangladesh is BDT 195 Taka. Buy best quality L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module from ElectronicsBD at a special price in Bangladesh (BD). You can buy L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন L9110S stepper motor driver board DC stepper motor board H-bridge double DC motor module শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।Thank you for the reviews ! Your comment is submitted
16 other products in the same category:
Specifications:
- Multi-function mini boost module
- Basic parameters
- The output voltage can be set to 5V/8V/9V/12V, the default is 12V
- Input voltage range: 2.5V~VOUT-0.5V
- Output performance: Take 3.7V lithium battery input as an example, it can output 5V1.2A, 8V0.7A, 9V0.6A, 12V0.5A. Make sure that the input current and output current do not exceed 1.5A.
Voltage setting description:
The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off. In the following table, 0 means the pad is disconnected and 1 means the pad is connected.
- A B VOUT
- 0 0 5V
- 0 1 8V
- 1 0 9V
- 1 1 12V
Package:
1x 1.5A Multi-function Mini Boost Module
- Integrated CH340 USB-to-serial converter for easy programming
- Compatible with Arduino IDE and NodeMCU firmware
- Built-in WiFi (802.11 b/g/n) for IoT and web-based applications
- 4MB flash memory for robust program storage
- 3.5-inch TFT LCD display module with vibrant 18-bit color support.
- Compatible with Arduino Uno and other microcontroller boards.
- Integrated SD card slot for extended storage and project capabilities.
- High resolution of 320x480 pixels for clear visuals.
- 64 RGB full-color LEDs with WS2812 chips.
- Ideal for creating vibrant and dynamic lighting effects.
- Compatible with Arduino microcontroller platforms.
- Digital input for smooth and precise control.
- Rich Color Display: 65K color support for vibrant and detailed visuals.
- High Resolution: 128x160 resolution for a clear display.
- Easy Interface: Uses SPI serial bus for quick and efficient communication with the Arduino.
- SD Card Slot: Convenient for function expansion via SD card storage.
- Operating Voltage: 2.7V to 3.3V
- Current Consumption: 6mA
- Pixel Arrangement: 48 rows and 84 columns (84×48) monochrome pixels
- Interface: Works using SPI interface
- Combines ATmega2560 and ESP8266 Wi-Fi module for IoT applications
- 32Mb memory for enhanced data storage
- Supports Wi-Fi 802.11 b/g/n 2.4 GHz connectivity
- Compatible with Arduino Mega and NodeMCU environments
- Ambient Light Cancellation: Filters out ambient light interference for accurate readings
- High Sample Rate: Capable of fast data output
- Efficient Power Use: Low power consumption with a voltage range of 1.8V to 3.3V
- Compact Design: Small and lightweight for easy integration into various projects
- High-performance metal detection
- Easy to use with sound and light alarm modes
- Low power consumption with 40mA operating current
- Compact PCB size for easy integration into projects
- Supports HUB75 port full color module, including ICN2038 IC
- Supports static to 1/32S scan mode
- Control range: 768*128, with a maximum width of 1280 and height of 256
- Communication ports: Wi-Fi and U-Disk
- Compact Design: Shell-in-one structure for enhanced durability
- High Voltage Output: Capable of stepping up voltage to DC 200-400KV
- Efficient Current Handling: Input 4A and output 0.5A
- Polar Discharge Distance: Approximately 1.5 cm, beyond which damage may occur
Specifications:
- System: ESP8266 in the form of the ESP-12F module
- Flash: 4MB
- Power supply: 3.3V or 5V from the USB port
- Built-in 2.4GHz 802.11 b/g/n WiFi communication
- WiFi modes: AP (Access Point), STA (Standalone), AP+STA
- Supported technologies: TKIP, WEP, CRC, CCMP, WPA/WPA2, WPS
- 11 GPIO pins
- 10 PWM outputs
- 1 analog input (ADC)
- Serial interfaces: UART, I2C, SPI, 1-Wire
- USB Type-C connector for programming and communication
- USB-UART converter on the CH340 chip
- PCB antenna built into the module
- Przysick Reset
- Goldpin raster: 2.54 mm
- Module dimensions: 34 x 25 mm
- Weight: 10 g
Package:
1x ESP8266 WEMOS D1 MINI ESP-12F Z USB-C
- Compact Size: With a size of 8.6mm x 12.33mm, this module is small and suitable for tight spaces.
- Low Input Voltage: Accepts input voltages ranging from 4.2V to 10V.
- Stable Output: Provides a stable 3.3V output with a current output of 800mA.
- Efficient Power Conversion: Ideal for stepping down voltage in small electronic projects.
- Integrated Cold Junction Compensation: Ensures accurate temperature measurement with built-in cold junction compensation.
- High-Resolution Output: Provides 12-bit resolution, allowing temperature readings from 0°C to 1024°C with a 0.25°C resolution.
- Thermocouple Break Detection: The module includes a circuit to detect thermocouple breaks, ensuring reliable operation.
- K-Type Thermocouple: Compatible with a K-type thermocouple, ideal for high-temperature measurements.
- Triple axis magnetometer for precise magnetic field measurement
- Small and compact size for easy integration into various projects
- I2C communication protocol for efficient data transfer
- Multi-functional maintenance tester for frontline maintenance personnel
- Supports various testing modes: 5V mode, 3.3V mode, automatic mode, etc.
- Compatible with 74ch series, 74ls series, osmo series, CD4000 series, HEF400 series, 4500 series, and more
- Built-in database with over 1300 chip data models and 420 transistor data models
Specifications:
- Multi-function mini boost module
- Basic parameters
- The output voltage can be set to 5V/8V/9V/12V, the default is 12V
- Input voltage range: 2.5V~VOUT-0.5V
- Output performance: Take 3.7V lithium battery input as an example, it can output 5V1.2A, 8V0.7A, 9V0.6A, 12V0.5A. Make sure that the input current and output current do not exceed 1.5A.
Voltage setting description:
The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off. In the following table, 0 means the pad is disconnected and 1 means the pad is connected.
- A B VOUT
- 0 0 5V
- 0 1 8V
- 1 0 9V
- 1 1 12V
Package:
1x 1.5A Multi-function Mini Boost Module
- Integrated CH340 USB-to-serial converter for easy programming
- Compatible with Arduino IDE and NodeMCU firmware
- Built-in WiFi (802.11 b/g/n) for IoT and web-based applications
- 4MB flash memory for robust program storage
- 3.5-inch TFT LCD display module with vibrant 18-bit color support.
- Compatible with Arduino Uno and other microcontroller boards.
- Integrated SD card slot for extended storage and project capabilities.
- High resolution of 320x480 pixels for clear visuals.
- 64 RGB full-color LEDs with WS2812 chips.
- Ideal for creating vibrant and dynamic lighting effects.
- Compatible with Arduino microcontroller platforms.
- Digital input for smooth and precise control.
- Rich Color Display: 65K color support for vibrant and detailed visuals.
- High Resolution: 128x160 resolution for a clear display.
- Easy Interface: Uses SPI serial bus for quick and efficient communication with the Arduino.
- SD Card Slot: Convenient for function expansion via SD card storage.
- Operating Voltage: 2.7V to 3.3V
- Current Consumption: 6mA
- Pixel Arrangement: 48 rows and 84 columns (84×48) monochrome pixels
- Interface: Works using SPI interface
- Combines ATmega2560 and ESP8266 Wi-Fi module for IoT applications
- 32Mb memory for enhanced data storage
- Supports Wi-Fi 802.11 b/g/n 2.4 GHz connectivity
- Compatible with Arduino Mega and NodeMCU environments
- Ambient Light Cancellation: Filters out ambient light interference for accurate readings
- High Sample Rate: Capable of fast data output
- Efficient Power Use: Low power consumption with a voltage range of 1.8V to 3.3V
- Compact Design: Small and lightweight for easy integration into various projects
- High-performance metal detection
- Easy to use with sound and light alarm modes
- Low power consumption with 40mA operating current
- Compact PCB size for easy integration into projects
- Supports HUB75 port full color module, including ICN2038 IC
- Supports static to 1/32S scan mode
- Control range: 768*128, with a maximum width of 1280 and height of 256
- Communication ports: Wi-Fi and U-Disk
- Compact Design: Shell-in-one structure for enhanced durability
- High Voltage Output: Capable of stepping up voltage to DC 200-400KV
- Efficient Current Handling: Input 4A and output 0.5A
- Polar Discharge Distance: Approximately 1.5 cm, beyond which damage may occur
Specifications:
- System: ESP8266 in the form of the ESP-12F module
- Flash: 4MB
- Power supply: 3.3V or 5V from the USB port
- Built-in 2.4GHz 802.11 b/g/n WiFi communication
- WiFi modes: AP (Access Point), STA (Standalone), AP+STA
- Supported technologies: TKIP, WEP, CRC, CCMP, WPA/WPA2, WPS
- 11 GPIO pins
- 10 PWM outputs
- 1 analog input (ADC)
- Serial interfaces: UART, I2C, SPI, 1-Wire
- USB Type-C connector for programming and communication
- USB-UART converter on the CH340 chip
- PCB antenna built into the module
- Przysick Reset
- Goldpin raster: 2.54 mm
- Module dimensions: 34 x 25 mm
- Weight: 10 g
Package:
1x ESP8266 WEMOS D1 MINI ESP-12F Z USB-C
- Compact Size: With a size of 8.6mm x 12.33mm, this module is small and suitable for tight spaces.
- Low Input Voltage: Accepts input voltages ranging from 4.2V to 10V.
- Stable Output: Provides a stable 3.3V output with a current output of 800mA.
- Efficient Power Conversion: Ideal for stepping down voltage in small electronic projects.
- Integrated Cold Junction Compensation: Ensures accurate temperature measurement with built-in cold junction compensation.
- High-Resolution Output: Provides 12-bit resolution, allowing temperature readings from 0°C to 1024°C with a 0.25°C resolution.
- Thermocouple Break Detection: The module includes a circuit to detect thermocouple breaks, ensuring reliable operation.
- K-Type Thermocouple: Compatible with a K-type thermocouple, ideal for high-temperature measurements.
- Triple axis magnetometer for precise magnetic field measurement
- Small and compact size for easy integration into various projects
- I2C communication protocol for efficient data transfer
- Multi-functional maintenance tester for frontline maintenance personnel
- Supports various testing modes: 5V mode, 3.3V mode, automatic mode, etc.
- Compatible with 74ch series, 74ls series, osmo series, CD4000 series, HEF400 series, 4500 series, and more
- Built-in database with over 1300 chip data models and 420 transistor data models
Specifications:
- Multi-function mini boost module
- Basic parameters
- The output voltage can be set to 5V/8V/9V/12V, the default is 12V
- Input voltage range: 2.5V~VOUT-0.5V
- Output performance: Take 3.7V lithium battery input as an example, it can output 5V1.2A, 8V0.7A, 9V0.6A, 12V0.5A. Make sure that the input current and output current do not exceed 1.5A.
Voltage setting description:
The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off. In the following table, 0 means the pad is disconnected and 1 means the pad is connected.
- A B VOUT
- 0 0 5V
- 0 1 8V
- 1 0 9V
- 1 1 12V
Package:
1x 1.5A Multi-function Mini Boost Module
- Integrated CH340 USB-to-serial converter for easy programming
- Compatible with Arduino IDE and NodeMCU firmware
- Built-in WiFi (802.11 b/g/n) for IoT and web-based applications
- 4MB flash memory for robust program storage
- 3.5-inch TFT LCD display module with vibrant 18-bit color support.
- Compatible with Arduino Uno and other microcontroller boards.
- Integrated SD card slot for extended storage and project capabilities.
- High resolution of 320x480 pixels for clear visuals.
- 64 RGB full-color LEDs with WS2812 chips.
- Ideal for creating vibrant and dynamic lighting effects.
- Compatible with Arduino microcontroller platforms.
- Digital input for smooth and precise control.