• Double-Sided Design: Maximizes space for component placement and routing.
• High-Quality Material: Made from Grade A material for durability.
• Ideal for Prototyping: Perfect for DIY electronics projects and testing.
• Pre-Printed Dot Pattern: Simplifies the assembly process for easy soldering.

The ATtiny85 is a high-performance, low-power 8-bit AVR RISC-based microcontroller from Microchip. Featuring 8KB ISP flash memory, 512B EEPROM, and 512B SRAM, it includes 6 general purpose I/O lines, 32 working registers, and various timers and counters. Ideal for industrial and automotive applications, it operates between 2.7-5.5 volts and achieves up to 20 MIPS at 20 MHz.

Key Features:

• Memory: 8KB ISP flash, 512B EEPROM, 512B SRAM
• I/O Lines: 6 general purpose
• Timers: One 8-bit timer/counter with compare modes, one 8-bit high-speed timer/counter
• AD Converter: 4-channel 10-bit
• Operating Voltage: 2.7-5.5 volts
• Performance: Up to 20 MIPS at 20 MHz
• Debugging: debugWIRE for on-chip debugging
• Safety Applications: Suitable for IEC 61508 and ISO 26262 standards

• Control 16 PWM outputs using just two I2C pins
• Stackable up to 62 shields for a total of 992 PWM outputs
• Built-in PWM driver with clock, no need for continuous signals
• 5V compliant, allowing control from a 3.3V

• Utilizes a 24-bit high precision HX711 A/D converter chip
• Includes an integrated 128 times programmable gain amplifier
• Supports two analog input channels
• Ideal for pressure and weighing sensor applications

• High-Performance Chip: Uses an imported high-performance chip for improved performance compared to standard modules.
• Wide Input Voltage Range: Converts any 0.9V to 5V DC voltage to a stable 5V DC output.
• Output Current: With a single AA battery, it delivers 200-300mA current; with two AA batteries, it provides 500-600mA output current.
• Conversion Efficiency: High efficiency of up to 96%.

• 2mW output power for low-power applications
• Wire antenna for reliable signal transmission
• Operates on 2.4GHz Zigbee Mesh networking
• Supports point-to-multipoint and peer-to-peer networks

• CH340G Chipset for USB-to-serial communication.
• Micro-USB Connectivity for easy connection to your computer.
• Onboard PCB Antenna with 2dBi gain for stable signal strength.
• Supports Wi-Fi 802.11b/g/n/e/i and Bluetooth 4.2 BR/EDR and BLE standards.

• Wide Input Voltage Range: Supports an input range of 5V to 35V.
• High Output Voltage: Adjustable output range from 6V to 45V.
• High Output Current: Provides up to 4A of output current.
• High Conversion Efficiency: Up to 92% for efficient power conversion.

Specifications:

• Type: WS2812 Lamp Bead Driver Board
• Voltage: 5V
• Color Modes: Full color, running water, seven color gradient, dazzle RGB
• Control: Microcontroller connection
• Wiring: Positive power line (+5V/VCC), ground wire (GND), signal line (DI)

Package:

1x Phantom Controller

• Brand: u-blox
• Model: NEO-6M
• Update Rate: 10Hz
• Built-In Antenna: 25 x 25 x 4mm ceramic patch antenna

Specifications:

• Microcontroller: PIC16F877A
• Crystal Frequency: 4MHz (replaceable via socket)
• Power Supply: USB interface or external 5V DC
• Communication Interface: RS232
• LEDs: 8 connected to the RD port (can be enabled/disabled via J3 jumper)
• Buttons: 4 independent buttons (connected to RB0, RB1, RB2, RB3)
• Programming Interface: ICSP (compatible with K150, PICKIT2, PICKIT3, ICD2)
• Power Expansion: VCC and GND pin power expansion interface (5V)
• Temperature Sensor: DS18B20 interface
• LCD Interface: Compatible with LCD1602 and LCD12864

Package:

1 x PIC development board(with PIC16F877A chip)

1 x USB cable

1 x CD

• Easy Control: Control WS2812 light bars, rings, or addressable LED strips with this ESP8266 based module.
• Arduino IDE Support: Program the module using the Arduino IDE for easy customization.
• GPIO2 Pin Control: The module uses GPIO2 for controlling the LEDs.
• Flexible Power Supply: Supports DC 3.7V-5V, making it versatile for different power sources.

• 5MP OV5647 Sensor: Delivers high-resolution images and videos.
• Infrared LED Light Compatibility: Screw holes to attach infrared LEDs for enhanced night vision.
• Adjustable Focal Length: 1.85mm focal length, providing flexible focus adjustments.
• Wide Viewing Angle: 130° diagonal angle for a broad field of view.

• Adjustable delay time range from 10 seconds to 24 hours
• Power-on reset for automatic start
• Current output voltage ratio: 3V/300mA, 5V/200mA, 9V/100mA
• Can drive 3V/5V/12V relays, LEDs, and similar devices

• Wide Frequency Range: Operates at 433MHz, suitable for long-range wireless communication.
• Multiple Modulation Options: Supports FSK, GFSK, MSK, and LoRa modulation for versatile transmission.
• High Sensitivity: With a sensitivity of -136dBm, it allows long-range communication even in weak signal environments.
• High Output Power: Provides an output power of +20dBm, enhancing transmission range and reliability.

• Aluminum Heat Sinks: Two large heat sinks ensure better heat dissipation and more stable performance.
• High-Capacity Capacitors: Equipped with five 330uF/50V high-frequency low-resistance capacitors for lower output ripple.
• Efficient Design: 23mm large magnet and 1.0 copper wire enhance the efficiency of operation.
• Voltage Surge Protection: Features a TVS Diode to protect against voltage surges, ensuring safer module operation.