• Simplifies design efforts, lowers system costs, and reduces design time.
• Converts platinum RTD resistance to digital values efficiently.
• Supports 100Ω to 1kΩ platinum RTDs (PT100 to PT1000).
• Compatible with 2-, 3-, and 4-wire sensor connections.

• Measures DC current, voltage, and power with high accuracy.
• Wide operating voltage range from 3V to 5.5V.
• Supports I2C interface for easy integration with microcontrollers.
• Current sensing range of ±3.2A with a resolution of ±0.8mA.

• Dual Wi-Fi (802.11b/g/n/e/i) and Bluetooth (4.2BR/EDR and BLE) connectivity.
• Built-in OV2640 camera for image capturing.
• Supports various communication interfaces like UART, SPI, I2C, PWM.
• Equipped with 32Mbit SPI flash and 520KB internal RAM, plus 8MB external PSRAM.

The PIC16F628 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer electronics. This microcontroller is designed for low voltage programming and offers a variety of features that enhance its versatility and performance.

The PIC16F72 is a powerful and easy-to-program CMOS FLASH-based 8-bit microcontroller from Microchip. It features the robust PIC® architecture, making it compatible with other PIC microcontrollers like the PIC16C5X, PIC12CXXX, and PIC16C7X series. This microcontroller is ideal for advanced A/D applications in automotive, industrial, appliances, and consumer electronics.

• 32-bit RGB full color LED module
• Utilizes WS2812B chips with built-in LED control
• 5050 package RGB full color highlight LEDs
• Simple control via a single IO port

• Operating voltage: DC12V (27A/12V battery x1)
• Operating Current: 10mA @ 12V 
• Radiated power: 10mw @ 12V
• Transmitting frequency: 315MHZ 
• Transmission distance :50-100M (Open field, the receiver sensitivity of -100dbm) 

• Voltage: 3.3V
• Resolution: 500dpi
• Backlight Color: Blue
• Interface: TTL Serial

• Waterproof: IP65 rating ensures outdoor durability.
• Wide Detection Range: 120-140 degrees for efficient motion sensing.
• Adjustable Delay & Sensitivity: Delay can be set from 3 seconds to 15 minutes, and ambient light sensitivity from <3 to 2000LUX.
• Versatile Installation Options: Can be installed in plane, internal angle, or outer corner.

Specifications:

• Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3 megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast mode plus)
• 2-wire serial control of focus mechanism
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10

• High-precision magnetic field sensing
• Atmospheric pressure measurement with BMP180 sensor
• Wide pressure range: 300-1100hPa
• Standard IIC communication protocol for easy integration

• Built-in Antenna – Comes with an integrated antenna for GPS signal reception.
• Baud Rate – Default baud rate of 9600bps, without battery installed.
• Wide Power Supply Range – Operates between 3-5V, making it suitable for various setups.
• EEPROM Storage – Stores all settings and data, even when power is off.

• Capacitive touch sensing with high sensitivity
• Easy to use with minimal external components required
• Small and compact design for easy integration
• Low power consumption for efficient operation

• Open-Type Vibration Sensor for precise motion detection
• Comparator Output (0 and 1) for easy digital signal processing
• Wide Voltage Range (3V - 5V) supports various microcontrollers
• Strong Driving Ability of over 15mA output current

Specifications:

• Sensing Voltage Range: 0 V to 26 V
• Power Supply Voltage: 2.7 V to 5.5 V
• Offset Voltage: ±80 µV (max)
• Gain Error: 0.25% (max)
• Configurable Averaging Options: Yes
• Programmable Addresses: Four
• Alert and Warning Outputs: Programmable
• Reporting: Shunt and Bus Voltage

Package:

1x Module

• 1.5-inch RGB OLED display with 128x128 resolution
• 65K high-color (16-bit) depth for vibrant visuals
• Supports both 4-wire SPI and 3-wire SPI interfaces
• Wide viewing angle of over 160°