Specifications:

• Lens type: Standard M12
• Processor: NXP LPC4330, 204 MHz, dual-core
• Power Input : USB input (5V) or unregulated input (6V to 10V)
• Lens field-of-view: 80° horizontal, 40° vertical
• RAM: 264K bytes
• Flash: 2M bytes
• Length (mm): 38
• Width (mm):42
• Height (mm): 15.3
• Weight (g): 70

Package:

1x Pixy 2.1 Smart Vision Sensor-Object Tracking Camera

• Wide Voltage Range: Supports 9V-90V battery measurement.
• High Precision: Minimum resolution of 0.1V with an allowable error of 1%.
• Low Power Consumption: Operating current is less than 5mA.
• Temperature Resistant: Functions efficiently between -10°C to +65°C.

• Double-Sided Design: Maximizes space for component placement and routing.
• High-Quality Material: Made from Grade A material for durability.
• Ideal for Prototyping: Perfect for DIY electronics projects and testing.
• Pre-Printed Dot Pattern: Simplifies the assembly process for easy soldering.

• STM32 microcontroller in LQFP64 or LQFP48 package
• 1 user LED shared with ARDUINO®
• 1 user and 1 reset push-buttons
• 32.768 kHz crystal oscillator

• 16-bit bidirectional I/O expansion for microcontrollers
• Supports I2C (MCP23017) up to 1.7 MHz and SPI (MCP23S17) up to 10 MHz
• Configurable interrupt system with INTA & INTB pins
• Three hardware address pins allow up to 8 devices on the same bus

• High-power boost converter module with up to 600W output.
• Wide input voltage range of DC 10V-60V.
• Adjustable output voltage (12V to 60V) for various applications.
• Supports constant current output up to 10A.

• High power 400W boost converter with constant current mode
• Adjustable output voltage from 10V to 60V
• Supports up to 15A input current (requires heat dissipation if exceeding 8A)
• High efficiency up to 96% for minimal power loss

• Automatically controls temperature, activating when below or above the set value.
• Supports both high and low-temperature triggering modes.
• Directly drives the relay to control AC (220V) or DC (30V) devices.

• Dot Laser for precise applications
• Low Power Consumption at 5mW
• Compact Design with a 6mm OD for easy integration
• Stable Operation at a 650nm wavelength

• Bidirectional Current Measurement: Accurately measures current flow in both directions, ideal for monitoring power consumption.
• I2C Interface: Simple integration into projects using I2C communication, making it suitable for a wide range of applications.
• Wide Voltage Range: Supports bus voltages from 0V to 26V, allowing flexibility in various electronic setups.
• Compact Design: Small footprint (25.5mm x 22.3mm) makes it easy to incorporate into tight spaces within your projects.

• Input Voltage Range: 4V to 38V DC (up to 38V).
• Output Voltage Range: 1.25V to 36V DC (adjustable).
• Maximum Output Current: 5A.
• High efficiency of up to 96%.

• High-performance microcontroller with dual-core Arm Cortex-M0+ running up to 133 MHz.
• Large memory capacity with 264KB on-chip SRAM and 2MB onboard QSPI Flash.
• Versatile connectivity with 26 GPIO pins, including 3 analogue inputs, 2 UARTs, 2 SPIs, 2 I2Cs, and 16 PWM channels.
• Flexible power input range from 1.8V to 5.5V DC, suitable for various applications.

• Work Frequency: 72 MHz
• Memory: 64KB flash memory and 20KB SRAM
• Power Supply: 2.0-3.6V
• I/O: General-purpose I/O pins

• Ideal for beginners and enthusiasts
• Includes components for 15 unique projects
• Learn Arduino basics and advanced programming
• Includes essential components like LEDs, resistors, jumper wires, and more

• Dual-core 240MHz CPU with high-speed processing
• WiFi, Bluetooth Classic, and BLE support
• 520KB SRAM, capable of running FreeRTOS, MicroPython, and more
• Compact 25.2mm x 18mm size with onboard antenna

• Equipped with Renesas RA4M1 MCU, based on Cortex M4 architecture
• Supports HID device emulation, allowing it to function as a mouse or keyboard
• Enhanced power section, allowing input voltage up to 24V through VIN
• Includes a 12-bit DAC for precision analog output

Specifications:

• Lens type: Standard M12
• Processor: NXP LPC4330, 204 MHz, dual-core
• Power Input : USB input (5V) or unregulated input (6V to 10V)
• Lens field-of-view: 80° horizontal, 40° vertical
• RAM: 264K bytes
• Flash: 2M bytes
• Length (mm): 38
• Width (mm):42
• Height (mm): 15.3
• Weight (g): 70

Package:

1x Pixy 2.1 Smart Vision Sensor-Object Tracking Camera

• Wide Voltage Range: Supports 9V-90V battery measurement.
• High Precision: Minimum resolution of 0.1V with an allowable error of 1%.
• Low Power Consumption: Operating current is less than 5mA.
• Temperature Resistant: Functions efficiently between -10°C to +65°C.

• Double-Sided Design: Maximizes space for component placement and routing.
• High-Quality Material: Made from Grade A material for durability.
• Ideal for Prototyping: Perfect for DIY electronics projects and testing.
• Pre-Printed Dot Pattern: Simplifies the assembly process for easy soldering.

• STM32 microcontroller in LQFP64 or LQFP48 package
• 1 user LED shared with ARDUINO®
• 1 user and 1 reset push-buttons
• 32.768 kHz crystal oscillator

• 16-bit bidirectional I/O expansion for microcontrollers
• Supports I2C (MCP23017) up to 1.7 MHz and SPI (MCP23S17) up to 10 MHz
• Configurable interrupt system with INTA & INTB pins
• Three hardware address pins allow up to 8 devices on the same bus