• Compatibility: Designed specifically for ESP8266 ESP-01 WiFi module.
• Pin Spacing: 2.54mm (standard breadboard pitch) for easy integration with breadboards.
• Voltage Regulator: 3.3V onboard regulator for stable voltage supply.
• Output Voltage: Provides 3.3V for powering the ESP-01 module.

• High-Sensitivity GPS: Utilizes the imported NEO-M8N GPS module with high signal strength.
• Ceramic Active Antenna: Offers excellent amplification and filtering for strong signal reception.
• Data Backup: Includes a backup battery and EEPROM to save configuration parameters.
• LED Indicator: Equipped with LED lights for easy status indication.

Specifications:

• Type: WS2812 Lamp Bead Driver Board
• Voltage: 5V
• Color Modes: Full color, running water, seven color gradient, dazzle RGB
• Control: Microcontroller connection
• Wiring: Positive power line (+5V/VCC), ground wire (GND), signal line (DI)

Package:

1x Phantom Controller

• 5W Infrared (IR) LED for night vision applications.
• Designed for Raspberry Pi Camera with 850nm wavelength.
• Durable metal and PC construction for longevity.
• Compact and lightweight, ideal for embedded projects.

• Dual-core 240MHz CPU with high-speed processing
• WiFi, Bluetooth Classic, and BLE support
• 520KB SRAM, capable of running FreeRTOS, MicroPython, and more
• Compact 25.2mm x 18mm size with onboard antenna

• DC-DC Step-Up BOOST Module: Converts DC voltage from 1.5V-12V to 12V output with high efficiency.
• High Efficiency: Efficiency ranges from 57% to 92%, ensuring effective power conversion.
• Wide Input Voltage Range: Works with input voltage between 1.5V and 12V, making it versatile for various applications.

• LCD Display for easy programming and time control
• Programmable Timer to automate power switching
• 24V Compatibility, ideal for various electrical applications
• Reliable Time Relay, suitable for street lamps, billboards, and automation systems

• Blue Background Lighting with White Signs.
• Displays 4 lines x 20 characters.
• Wide Operating Temperature: -20°C to +60°C.
• High Viewing Angle and Contrast.

Specifications:

• Channels: 3
• Frequency Range: Typically from 1 Hz to several kHz (check the specific module for exact range)
• Duty Cycle Range: 0% to 100%
• Output Type: Square and rectangular wave signals
• Power Supply: Usually 5V or 12V (verify the exact voltage required for your module)
• Control Interface: Typically includes knobs or digital inputs for adjusting frequency and duty cycle
• Output Voltage: Generally the same as the power supply voltage

Package:

1x Modue

• Model: HBV-1466FF
• Highest resolution: 2592 x 1944
• Field of view: 60°
• Chip: OV5640 (1/4")

• Dot Laser for precise applications
• Low Power Consumption at 5mW
• Compact Design with a 6mm OD for easy integration
• Stable Operation at a 650nm wavelength

• Dual Motor Drive: Supports two DC motors with up to 2A current per channel.
• Wide Voltage Range: 6.5V–12V (VIN Power Supply), 4.8V–35V (External Power).
• PWM Speed Control: Supports precise motor speed control.
• PLL Advanced Speed Control: Ensures smooth motor operation.

• LM358 Chip Onboard: Ensures reliable operational amplification.
• 100x Gain Circuit Design: Ideal for signal amplification applications.
• Adjustable Magnification: Features a 10K adjustable resistor for gain tuning.
• Power Indicator: Onboard LED for power status indication.

The Atmel ATtiny13A-PU is a picoPower 8-bit AVR RISC-based microcontroller designed for high performance and low power consumption. This microcontroller is ideal for a variety of applications, offering a compact and efficient solution with its powerful instruction set and versatile features.

✔ Supports 1MB/S Operating Rate – Ideal for high-speed communication
✔ ISO-11898 Standard Compliant – Meets the physical layer requirements for CAN
✔ Compatible with 12V and 24V Systems – Versatile for different voltage systems
✔ Slope External Control – Reduces RFI (Radio Frequency Interference)

• Designed for Arduino UNO R3 for easy expansion
• Supports multiple sensors, servos, relays, and modules
• Buckled ports for VCC, GND, and Output for easy connections
• Reset Button for quick board reset