- Built-in WS2812 IC for easy control
- Supports full-color RGB lighting
- Operates at 4V - 5.5V DC
- Compact and lightweight design
All Cattegories
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
element14 Upgraded Raspberry Pi Board
- Write a review
Model: 3858
- 512MB RAM for enhanced performance
- Ideal for multimedia, high-memory, and mobile applications
- HDMI port, SD memory card slot, and Ethernet port
- Supports Android 4.0 operating system
Data Protection.
Delivery all over Bangladesh.

Guarantee safe & secure checkout
Specifications:
- Processor: Broadcom BCM2835, ARM1176JZF-S 700 MHz
- Memory: 512MB RAM
- USB Ports: 2 x USB 2.0
- HDMI: 1 x HDMI port
- Storage: SD memory card slot
- Networking: 10/100 Ethernet port
- Power Supply: 5V/2A DC input
- OS Support: Android 4.0, Linux, Raspbian
Package:
- Raspberry Pi 512MB Board
- No casing included (uncased configuration)
Description:
The Raspberry Pi 512MB Board from element14 is an upgraded version with double the RAM for smoother multimedia and high-memory applications. It features a faster processor and enhanced memory access, ideal for projects that require more resources. This board is perfect for both educational and commercial purposes, enabling optimal performance for your Raspberry Pi-based projects.
FAQ:
Q1: Does the Raspberry Pi 512MB board support Android 4.0?
A1: Yes, it can run Android 4.0 due to the added 512MB of RAM.
Q2: Can I use a touchscreen with this Raspberry Pi?
A2: Yes, with the increased memory, you can now add peripherals like a touchscreen for mobile or multimedia applications.
Q3: Is a power supply included?
A3: No, the power supply is not included. You will need a 5V/2A DC power source.
Q4: What is the storage capacity of this Raspberry Pi?
A4: It uses an SD card slot for storage with no internal memory. The maximum supported size is up to 32GB.
Q5: Can I use this board for commercial applications?
A5: Absolutely! The Raspberry Pi 512MB is ideal for both recreational, educational, and commercial uses, especially with its higher RAM capacity.
element14 Upgraded Raspberry Pi Board ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original element14 Upgraded Raspberry Pi Board from ElectronicsBD. We have a large collection of the latest element14 Upgraded Raspberry Pi Board to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of element14 Upgraded Raspberry Pi Board in Bangladesh (BD) ?
The latest and special price of element14 Upgraded Raspberry Pi Board in Bangladesh is BDT 5508 Taka. Buy best quality element14 Upgraded Raspberry Pi Board from ElectronicsBD at a special price in Bangladesh (BD). You can buy element14 Upgraded Raspberry Pi Board at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন element14 Upgraded Raspberry Pi Board শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।Thank you for the reviews ! Your comment is submitted
16 other products in the same category:
- High-Precision Infrared Temperature Sensor with MLX90614ESF-BCC chip
- Non-Contact Temperature Measurement for accurate readings
- Standard I2C Communication Protocol for easy integration
- Wide Voltage Compatibility (3V - 5V) with internal low dropout regulator
- Wide Voltage Range: Operates with an input voltage of 3.3V to 5.5V, making it compatible with various systems.
- Accurate Measurement: Provides TDS (Total Dissolved Solids) measurement range of 0-1000ppm with ±10% accuracy at 25°C.
- Low Power Consumption: 3-6mA working current, ensuring energy efficiency.
- Waterproof Probe: Includes a waterproof TDS probe for reliable outdoor or aquatic use.
- Double-Sided Design: Provides more flexibility for component placement and routing.
- High-Quality PCB: Grade A construction ensures reliability and durability.
- Universal Use: Ideal for DIY projects, prototyping, and experimenting with circuits.
- Easy Soldering: Pre-printed dot pattern makes the soldering process easier.
- Dual Wi-Fi (802.11b/g/n/e/i) and Bluetooth (4.2BR/EDR and BLE) connectivity.
- Built-in OV2640 camera for image capturing.
- Supports various communication interfaces like UART, SPI, I2C, PWM.
- Equipped with 32Mbit SPI flash and 520KB internal RAM, plus 8MB external PSRAM.
- Triple axis magnetometer for precise magnetic field measurement
- Small and compact size for easy integration into various projects
- I2C communication protocol for efficient data transfer
- Wide Input Voltage Range: Supports an input range of 5V to 35V.
- High Output Voltage: Adjustable output range from 6V to 45V.
- High Output Current: Provides up to 4A of output current.
- High Conversion Efficiency: Up to 92% for efficient power conversion.
- Dual Output Voltages: 5.0V and 3.3V
- Input: Can be powered via DC wall wart or USB port
- Voltage Selection: 2-pin shunt jumper for output voltage selection
- Independent Control: Each rail can be
- Ultra-low power consumption (<50uA quiescent current)
- Wide working voltage range (DC 4.5V–20V)
- High sensitivity with <100° detection angle
- Compact and lightweight design
- 16-bit resolution ADC for precise analog-to-digital conversion.
- Four analog input channels for flexible measurement.
- Programmable Gain Amplifier (PGA) for improved sensitivity.
- Operating voltage range: 2.0V to 5.5V, compatible with both 3.3V and 5V systems.
- High-precision TDS measurement for water quality testing.
- Compatible with Arduino and other microcontrollers for easy integration.
- Low power consumption with a working current of just 3-6mA.
- Wide measurement range from 0 to 1000ppm.
- Supports HUB75 port full color module, including ICN2038 IC
- Supports static to 1/32S scan mode
- Control range: 768*128, with a maximum width of 1280 and height of 256
- Communication ports: Wi-Fi and U-Disk
- Compatible with the UNO IDE 1.0+ (OSX/Win/Linux)
- Powered via USB or external sources (5V or 7-35V, 12V recommended for optimal performance)
- On-board 500mA 5V Regulator for stable power supply
- Integrated Micro USB port for easy programming and power
- Converts DC 3-15V input to a stable -12V output
- High efficiency with minimal power loss
- Low static working current for energy efficiency
- Suitable for ADC, DAC, LCD power supply applications
- Monitors ECG (Electrocardiogram) signals
- Measures heart rate and pulse with high accuracy
- Compact and easy to integrate with Arduino or other microcontrollers
- Low power consumption
- Wide Supply Voltage Range: 2.7V - 5.5V (3mA current consumption)
- Automatic Gain Control (AGC): Selectable max gain of 40dB, 50dB, or 60dB
- Low Noise & Low Distortion: 30nV/√Hz noise density, 0.04% THD (typ)
- Frequency Response: 20Hz - 20kHz for high-fidelity audio
- Built-in WS2812 IC for easy control
- Supports full-color RGB lighting
- Operates at 4V - 5.5V DC
- Compact and lightweight design
- High-Precision Infrared Temperature Sensor with MLX90614ESF-BCC chip
- Non-Contact Temperature Measurement for accurate readings
- Standard I2C Communication Protocol for easy integration
- Wide Voltage Compatibility (3V - 5V) with internal low dropout regulator
- Wide Voltage Range: Operates with an input voltage of 3.3V to 5.5V, making it compatible with various systems.
- Accurate Measurement: Provides TDS (Total Dissolved Solids) measurement range of 0-1000ppm with ±10% accuracy at 25°C.
- Low Power Consumption: 3-6mA working current, ensuring energy efficiency.
- Waterproof Probe: Includes a waterproof TDS probe for reliable outdoor or aquatic use.
- Double-Sided Design: Provides more flexibility for component placement and routing.
- High-Quality PCB: Grade A construction ensures reliability and durability.
- Universal Use: Ideal for DIY projects, prototyping, and experimenting with circuits.
- Easy Soldering: Pre-printed dot pattern makes the soldering process easier.
- Dual Wi-Fi (802.11b/g/n/e/i) and Bluetooth (4.2BR/EDR and BLE) connectivity.
- Built-in OV2640 camera for image capturing.
- Supports various communication interfaces like UART, SPI, I2C, PWM.
- Equipped with 32Mbit SPI flash and 520KB internal RAM, plus 8MB external PSRAM.
- Triple axis magnetometer for precise magnetic field measurement
- Small and compact size for easy integration into various projects
- I2C communication protocol for efficient data transfer
- Wide Input Voltage Range: Supports an input range of 5V to 35V.
- High Output Voltage: Adjustable output range from 6V to 45V.
- High Output Current: Provides up to 4A of output current.
- High Conversion Efficiency: Up to 92% for efficient power conversion.
- Dual Output Voltages: 5.0V and 3.3V
- Input: Can be powered via DC wall wart or USB port
- Voltage Selection: 2-pin shunt jumper for output voltage selection
- Independent Control: Each rail can be
- Ultra-low power consumption (<50uA quiescent current)
- Wide working voltage range (DC 4.5V–20V)
- High sensitivity with <100° detection angle
- Compact and lightweight design
- 16-bit resolution ADC for precise analog-to-digital conversion.
- Four analog input channels for flexible measurement.
- Programmable Gain Amplifier (PGA) for improved sensitivity.
- Operating voltage range: 2.0V to 5.5V, compatible with both 3.3V and 5V systems.
- High-precision TDS measurement for water quality testing.
- Compatible with Arduino and other microcontrollers for easy integration.
- Low power consumption with a working current of just 3-6mA.
- Wide measurement range from 0 to 1000ppm.
- Supports HUB75 port full color module, including ICN2038 IC
- Supports static to 1/32S scan mode
- Control range: 768*128, with a maximum width of 1280 and height of 256
- Communication ports: Wi-Fi and U-Disk
- Compatible with the UNO IDE 1.0+ (OSX/Win/Linux)
- Powered via USB or external sources (5V or 7-35V, 12V recommended for optimal performance)
- On-board 500mA 5V Regulator for stable power supply
- Integrated Micro USB port for easy programming and power
- Converts DC 3-15V input to a stable -12V output
- High efficiency with minimal power loss
- Low static working current for energy efficiency
- Suitable for ADC, DAC, LCD power supply applications
- Monitors ECG (Electrocardiogram) signals
- Measures heart rate and pulse with high accuracy
- Compact and easy to integrate with Arduino or other microcontrollers
- Low power consumption
- Wide Supply Voltage Range: 2.7V - 5.5V (3mA current consumption)
- Automatic Gain Control (AGC): Selectable max gain of 40dB, 50dB, or 60dB
- Low Noise & Low Distortion: 30nV/√Hz noise density, 0.04% THD (typ)
- Frequency Response: 20Hz - 20kHz for high-fidelity audio
- Built-in WS2812 IC for easy control
- Supports full-color RGB lighting
- Operates at 4V - 5.5V DC
- Compact and lightweight design
- High-Precision Infrared Temperature Sensor with MLX90614ESF-BCC chip
- Non-Contact Temperature Measurement for accurate readings
- Standard I2C Communication Protocol for easy integration
- Wide Voltage Compatibility (3V - 5V) with internal low dropout regulator
- Wide Voltage Range: Operates with an input voltage of 3.3V to 5.5V, making it compatible with various systems.
- Accurate Measurement: Provides TDS (Total Dissolved Solids) measurement range of 0-1000ppm with ±10% accuracy at 25°C.
- Low Power Consumption: 3-6mA working current, ensuring energy efficiency.
- Waterproof Probe: Includes a waterproof TDS probe for reliable outdoor or aquatic use.
- Double-Sided Design: Provides more flexibility for component placement and routing.
- High-Quality PCB: Grade A construction ensures reliability and durability.
- Universal Use: Ideal for DIY projects, prototyping, and experimenting with circuits.
- Easy Soldering: Pre-printed dot pattern makes the soldering process easier.
- Dual Wi-Fi (802.11b/g/n/e/i) and Bluetooth (4.2BR/EDR and BLE) connectivity.
- Built-in OV2640 camera for image capturing.
- Supports various communication interfaces like UART, SPI, I2C, PWM.
- Equipped with 32Mbit SPI flash and 520KB internal RAM, plus 8MB external PSRAM.