- Dual-core ARM Cortex M0+ processor, up to 133 MHz
- 264kB SRAM and 2MB Flash memory
- Integrated WiFi (IEEE 802.11 b/g/n) and Bluetooth 5.2 (not software supported at launch)
- USB 1.1 Host and Device support
All Cattegories
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
E32-433T20DC E32-TTL-100 SX1278 wireless module
- Write a review
Model: 3963
- Based on the SX1278 IC from SEMTECH
- Utilizes LoRa spread spectrum technology for enhanced range
- Functions as both a transmitter and receiver
- Ideal for long-distance wireless communication
Data Protection.
Delivery all over Bangladesh.

Guarantee safe & secure checkout
Specifications:
- IC: SX1278
- Frequency Range: 410~441MHz
- Power: 10~20dBm
- Transmission Distance: 3.0km - 8.0km
- Interface: UART
- Weight: 6.3±0.1g
Package:
- 1x E32-433T20DC E32-TTL-100 SX1278 Wireless Module (433MHz, Wireless COM/Serial Interface, LoRa Spreading, 3000m - 8000m, UART)
Description: The E32-433T20DC is a versatile wireless transceiver module based on the SX1278 chip from SEMTECH, designed for both transmission and reception of data. It operates within the 410-441MHz frequency range and supports a power output of 10-20dBm. Leveraging LoRa spread spectrum technology, this module boasts an impressive 3.0 to 8.0-kilometer transmission range, providing superior coverage and signal penetration compared to traditional FSK modules. It's equipped with a UART interface, making it an excellent choice for long-range wireless communication projects.
FAQ:
-
What is the frequency range of the E32-433T20DC?
The frequency range is 410~441MHz. -
What is the maximum transmission distance for the E32-433T20DC?
The transmission distance can range from 3.0km to 8.0km, depending on environmental conditions. -
Can this module function as both a transmitter and receiver?
Yes, the E32-433T20DC is a transceiver, meaning it can both transmit and receive data. -
What is LoRa technology, and how does it improve the module's performance?
LoRa is a spread spectrum technology that enhances the transmission range and penetration capabilities, allowing the module to perform better than traditional FSK modules. -
What interface does the module use?
The E32-433T20DC uses a UART interface for communication.
E32-433T20DC E32-TTL-100 SX1278 wireless module ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original E32-433T20DC E32-TTL-100 SX1278 wireless module from ElectronicsBD. We have a large collection of the latest E32-433T20DC E32-TTL-100 SX1278 wireless module to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of E32-433T20DC E32-TTL-100 SX1278 wireless module in Bangladesh (BD) ?
The latest and special price of E32-433T20DC E32-TTL-100 SX1278 wireless module in Bangladesh is BDT 1873 Taka. Buy best quality E32-433T20DC E32-TTL-100 SX1278 wireless module from ElectronicsBD at a special price in Bangladesh (BD). You can buy E32-433T20DC E32-TTL-100 SX1278 wireless module at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন E32-433T20DC E32-TTL-100 SX1278 wireless module শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।Thank you for the reviews ! Your comment is submitted
16 other products in the same category:
- 3.2-inch Resistive Touch Display: Allows for intuitive touch control.
- High Resolution: Offers 320 x 240 resolution for clear visuals.
- Full Compatibility: Compatible with all versions of Raspberry Pi boards (4B/3B+).
- CE & RoHS Certified: Meets safety and environmental standards for quality assurance.
- Chipset: TI CC2530 chipset for reliable wireless communication.
- Voltage Range: DC 2.1V ~ 3.6V (recommended 3.3V for optimal performance).
- Transmission Distance: Up to 800 meters (with 3dBi antenna in open space).
- Antenna Interface: SMA interface for connecting antennas.
- WizFi210 wifi module for seamless wireless connectivity.
- Bridges TTL serial port communication to IEEE802.11b/g/n wireless communication.
- Compatible with Arduino/Freaduino for easy integration into projects.
- Enables remote control and management of devices over a wireless network.
- Supports CAN V2.0B Specification with data transfer rate up to 1 Mbyte/sec.
- Handles 0 to 8-byte data field with Standard Frame and Remote Control Frame.
- 5V DC power supply module with SPI interface protocol control.
- Includes 120-ohm resistance for impedance matching to ensure long-distance data transmission and prevent signal radiation.
- Complete kit for beginners and prototyping projects
- Includes R3 board, sensors, modules, and various components
- Ideal for learning and experimenting with electronics
- Compatible with Arduino IDE
- Microcontroller Support: Compatible with a wide range of PIC microcontrollers, including PIC10, PIC12, PIC16, PIC18, PIC24, dsPIC30, and dsPIC33.
- Versatile Programming Voltage: Operates with targets requiring 2.0V to 5.5V.
- USB Interface: Equipped with USB 2.0 for both power and data communication.
- Firmware Upgradeable: Ensures compatibility with newer PIC microcontroller versions.
- Brand new and high quality.
- L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
- Can drive DC motors and power supplies of up to 36V with a maximum current of 600mA per channel.
- H-Bridge configuration allows voltage to be applied across a load in either direction, ideal for motors.
- Onboard AMS1117-3.3 chip for stable 3.3V output
- DC input voltage range: 4.75V to 12V
- Self-locking switch: Easily turn power on/off during testing
- Power indicator light: Indicates whether the power is on
- Dual-Output: Provides both temperature and humidity control outputs.
- High Precision: Control accuracy of 0.1°C for temperature and 0.1%RH for humidity.
- Wide Detection Range: Temperature range of -20°C to 60°C and humidity range of 0% to 100% RH.
- Relay Output: Maximum output capacity of 10A for controlling devices.
- All GPIOs can be configured as external interrupt input and wake-up source
- One full-duplex UART with a maximum rate of 3 Mbps
- Supports I2C, DAC, PWM, and multiple interfaces
- Built-in 242 KB high-speed SRAM
- Combines ATmega2560 and ESP8266 Wi-Fi module for IoT applications
- 32Mb memory for enhanced data storage
- Supports Wi-Fi 802.11 b/g/n 2.4 GHz connectivity
- Compatible with Arduino Mega and NodeMCU environments
- Supports both 110V and 220V AC voltage
- Compatible with 3.3V/5V logic, making it ideal for Arduino and ESP-based projects
- Optocoupler isolation for improved safety and reliability
- Uses BTA16-600B TRIAC for efficient AC load control
- Integrated ESP32-S2FH4 chip with advanced Xtensa single-core 32-bit LX7 microprocessor.
- Equipped with 128KB ROM and 320KB SRAM for efficient processing.
- Includes 16KB RTC SRAM for low-power applications.
- Built-in 40MHz crystal oscillator for stable operation.
- 16 Button Matrix: Includes keys 0-9, #, *, and A-D, providing a wide range of input options.
- Easy Communication: Simple and direct communication with any microcontroller, perfect for Arduino projects.
- Compact Design: Space-efficient design ideal for embedded projects and prototyping.
- Durable Keys: High-quality switches for responsive performance.
- Weekly programmable digital timer with LCD display
- Supports up to 34 on/off programs with a minimum interval of 1 minute
- High load capacity of 16A (250V AC) / 20A (30V DC)
- 60-day power reserve to maintain memory during power loss
- Dual-core ARM Cortex M0+ processor, up to 133 MHz
- 264kB SRAM and 2MB Flash memory
- Integrated WiFi (IEEE 802.11 b/g/n) and Bluetooth 5.2 (not software supported at launch)
- USB 1.1 Host and Device support
- 3.2-inch Resistive Touch Display: Allows for intuitive touch control.
- High Resolution: Offers 320 x 240 resolution for clear visuals.
- Full Compatibility: Compatible with all versions of Raspberry Pi boards (4B/3B+).
- CE & RoHS Certified: Meets safety and environmental standards for quality assurance.
- Chipset: TI CC2530 chipset for reliable wireless communication.
- Voltage Range: DC 2.1V ~ 3.6V (recommended 3.3V for optimal performance).
- Transmission Distance: Up to 800 meters (with 3dBi antenna in open space).
- Antenna Interface: SMA interface for connecting antennas.
- WizFi210 wifi module for seamless wireless connectivity.
- Bridges TTL serial port communication to IEEE802.11b/g/n wireless communication.
- Compatible with Arduino/Freaduino for easy integration into projects.
- Enables remote control and management of devices over a wireless network.
- Supports CAN V2.0B Specification with data transfer rate up to 1 Mbyte/sec.
- Handles 0 to 8-byte data field with Standard Frame and Remote Control Frame.
- 5V DC power supply module with SPI interface protocol control.
- Includes 120-ohm resistance for impedance matching to ensure long-distance data transmission and prevent signal radiation.
- Complete kit for beginners and prototyping projects
- Includes R3 board, sensors, modules, and various components
- Ideal for learning and experimenting with electronics
- Compatible with Arduino IDE
- Microcontroller Support: Compatible with a wide range of PIC microcontrollers, including PIC10, PIC12, PIC16, PIC18, PIC24, dsPIC30, and dsPIC33.
- Versatile Programming Voltage: Operates with targets requiring 2.0V to 5.5V.
- USB Interface: Equipped with USB 2.0 for both power and data communication.
- Firmware Upgradeable: Ensures compatibility with newer PIC microcontroller versions.
- Brand new and high quality.
- L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
- Can drive DC motors and power supplies of up to 36V with a maximum current of 600mA per channel.
- H-Bridge configuration allows voltage to be applied across a load in either direction, ideal for motors.
- Onboard AMS1117-3.3 chip for stable 3.3V output
- DC input voltage range: 4.75V to 12V
- Self-locking switch: Easily turn power on/off during testing
- Power indicator light: Indicates whether the power is on
- Dual-Output: Provides both temperature and humidity control outputs.
- High Precision: Control accuracy of 0.1°C for temperature and 0.1%RH for humidity.
- Wide Detection Range: Temperature range of -20°C to 60°C and humidity range of 0% to 100% RH.
- Relay Output: Maximum output capacity of 10A for controlling devices.
- All GPIOs can be configured as external interrupt input and wake-up source
- One full-duplex UART with a maximum rate of 3 Mbps
- Supports I2C, DAC, PWM, and multiple interfaces
- Built-in 242 KB high-speed SRAM
- Combines ATmega2560 and ESP8266 Wi-Fi module for IoT applications
- 32Mb memory for enhanced data storage
- Supports Wi-Fi 802.11 b/g/n 2.4 GHz connectivity
- Compatible with Arduino Mega and NodeMCU environments
- Supports both 110V and 220V AC voltage
- Compatible with 3.3V/5V logic, making it ideal for Arduino and ESP-based projects
- Optocoupler isolation for improved safety and reliability
- Uses BTA16-600B TRIAC for efficient AC load control
- Integrated ESP32-S2FH4 chip with advanced Xtensa single-core 32-bit LX7 microprocessor.
- Equipped with 128KB ROM and 320KB SRAM for efficient processing.
- Includes 16KB RTC SRAM for low-power applications.
- Built-in 40MHz crystal oscillator for stable operation.
- 16 Button Matrix: Includes keys 0-9, #, *, and A-D, providing a wide range of input options.
- Easy Communication: Simple and direct communication with any microcontroller, perfect for Arduino projects.
- Compact Design: Space-efficient design ideal for embedded projects and prototyping.
- Durable Keys: High-quality switches for responsive performance.
- Weekly programmable digital timer with LCD display
- Supports up to 34 on/off programs with a minimum interval of 1 minute
- High load capacity of 16A (250V AC) / 20A (30V DC)
- 60-day power reserve to maintain memory during power loss
- Dual-core ARM Cortex M0+ processor, up to 133 MHz
- 264kB SRAM and 2MB Flash memory
- Integrated WiFi (IEEE 802.11 b/g/n) and Bluetooth 5.2 (not software supported at launch)
- USB 1.1 Host and Device support
- 3.2-inch Resistive Touch Display: Allows for intuitive touch control.
- High Resolution: Offers 320 x 240 resolution for clear visuals.
- Full Compatibility: Compatible with all versions of Raspberry Pi boards (4B/3B+).
- CE & RoHS Certified: Meets safety and environmental standards for quality assurance.
- Chipset: TI CC2530 chipset for reliable wireless communication.
- Voltage Range: DC 2.1V ~ 3.6V (recommended 3.3V for optimal performance).
- Transmission Distance: Up to 800 meters (with 3dBi antenna in open space).
- Antenna Interface: SMA interface for connecting antennas.
- WizFi210 wifi module for seamless wireless connectivity.
- Bridges TTL serial port communication to IEEE802.11b/g/n wireless communication.
- Compatible with Arduino/Freaduino for easy integration into projects.
- Enables remote control and management of devices over a wireless network.
- Supports CAN V2.0B Specification with data transfer rate up to 1 Mbyte/sec.
- Handles 0 to 8-byte data field with Standard Frame and Remote Control Frame.
- 5V DC power supply module with SPI interface protocol control.
- Includes 120-ohm resistance for impedance matching to ensure long-distance data transmission and prevent signal radiation.