Specifications:

• Input Signal: PWM (Pulse Width Modulation)
• PWM Input Range: 0% - 100%
• Output Voltage Range: 0-10V
• Power Supply: 12V - 24V DC
• Input Frequency: 1kHz - 3kHz
• Output Current: Maximum 10mA
• Dimensions: Varies by manufacturer (typically small, PCB module size)
• Working Temperature: -40°C to +85°C

Package:

1x Module

• 16-button keypad for microcontroller expansion
• 4x4 matrix layout for easy interfacing
• Durable PCB design for long-term use
• Compatible with Arduino and other MCUs

• Wide Input Voltage Range: Operates with DC 5V to 12V input voltage.
• High Power Output: Delivers 120W of power for induction heating.
• Efficient Induction Heating: Designed for high-frequency induction heating applications.
• Compact Size: 8x4cm in size, easy to integrate into various setups.

• Strong Driving Capability: Uses L298N chip to provide reliable motor driving power.
• Low Heat Generation: Designed for efficient and cool operation.
• High Anti-Interference: Built with excellent anti-interference capabilities.
• Built-in Voltage Regulator: 78M05 regulator ensures proper power conversion.

• Microcontroller Support: Compatible with a wide range of PIC microcontrollers, including PIC10, PIC12, PIC16, PIC18, PIC24, dsPIC30, and dsPIC33.
• Versatile Programming Voltage: Operates with targets requiring 2.0V to 5.5V.
• USB Interface: Equipped with USB 2.0 for both power and data communication.
• Firmware Upgradeable: Ensures compatibility with newer PIC microcontroller versions.

• Waterproof: IP65 rating ensures outdoor durability.
• Wide Detection Range: 120-140 degrees for efficient motion sensing.
• Adjustable Delay & Sensitivity: Delay can be set from 3 seconds to 15 minutes, and ambient light sensitivity from <3 to 2000LUX.
• Versatile Installation Options: Can be installed in plane, internal angle, or outer corner.

• Ideal for Prototyping: Perfect for building custom circuits, especially for Arduino projects.
• Single-Sided Design: Simplifies soldering and circuit design.
• Durable Construction: Made from high-quality material with a copper thickness of 1 oz.
• Customizable Design: Can be easily modified to fit specific project needs.

• Aluminum Heat Sinks: Two large heat sinks ensure better heat dissipation and more stable performance.
• High-Capacity Capacitors: Equipped with five 330uF/50V high-frequency low-resistance capacitors for lower output ripple.
• Efficient Design: 23mm large magnet and 1.0 copper wire enhance the efficiency of operation.
• Voltage Surge Protection: Features a TVS Diode to protect against voltage surges, ensuring safer module operation.

The PIC12F675 is a powerful and easy-to-program CMOS Flash-based 8-bit microcontroller from Microchip. It features the robust PIC® MCU architecture, making it suitable for a wide range of applications, including automotive, industrial, appliances, and consumer entry-level products. This microcontroller is designed for field re-programmability, offering flexibility and convenience.

• USB Type-C Input: Supports 5V Type-C USB input for easy charging and power supply.
• Overcharge Protection: Prevents overcharging with a cut-off voltage of 4.28V.
• Over-discharge Protection: Stops discharge when the battery voltage drops to 3.2V.
• Maximum Output Current: Can provide a charging current of up to 1A (1000mA).

• Wide Frequency Range: Supports FM signals between 76 MHz to 108 MHz.
• I2C Interface: Easy integration with microcontrollers using I2C communication.
• Voltage Flexibility: Operates with both 3.3V and 5V power supplies.
• Low Power Consumption: Consumes less than 20 mA, suitable for battery-powered projects.

• Dual Motor Drive: Supports two DC motors with up to 2A current per channel.
• Wide Voltage Range: 6.5V–12V (VIN Power Supply), 4.8V–35V (External Power).
• PWM Speed Control: Supports precise motor speed control.
• PLL Advanced Speed Control: Ensures smooth motor operation.

• All GPIOs can be configured as external interrupt input and wake-up source
• One full-duplex UART with a maximum rate of 3 Mbps
• Supports I2C, DAC, PWM, and multiple interfaces
• Built-in 242 KB high-speed SRAM

• LCD Display: Clear frequency signal display with backlight, ensuring visibility even in low-light environments.
• Adjustable PWM Signal Output: Output frequency and duty cycle (0%-100%) can be easily adjusted.
• Wide Frequency Range: Supports frequencies from 1Hz to 150kHz, with high accuracy and stability.

• Built-in WS2812 IC for easy control
• Supports full-color RGB lighting
• Operates at 4V - 5.5V DC
• Compact and lightweight design

• 1 channel relay interface board
• Uses NE555 chip for timer control
• Adjustable delay time from 0 to 10 seconds
• Control voltage: AC 0~250V/max. 10A, DC 0-30V/max. 10A