• High precision humidity sensor with ±3% RH accuracy.
• Temperature measurement with ±0.4°C accuracy.
• Wide operating range from 0% to 100% RH and -40°C to +125°C.
• Low power consumption with 150 μA active current and 60 nA standby current.

• Multiple Sensors in One Board: Includes a gyroscope, accelerometer, compass, barometer, and thermometer for various applications.
• Compact Size: Small form factor of 1.5" x 0.9" makes it suitable for compact projects.
• I2C Communication: Uses I2C 7-bit addresses for easy integration with microcontrollers like Arduino.
• Wide Voltage Compatibility: Operates with both 3V and 5V input voltage for flexible usage.

Specifications:

• Lens type: Standard M12
• Processor: NXP LPC4330, 204 MHz, dual-core
• Power Input : USB input (5V) or unregulated input (6V to 10V)
• Lens field-of-view: 80° horizontal, 40° vertical
• RAM: 264K bytes
• Flash: 2M bytes
• Length (mm): 38
• Width (mm):42
• Height (mm): 15.3
• Weight (g): 70

Package:

1x Pixy 2.1 Smart Vision Sensor-Object Tracking Camera

• Compact Design: Small 4.8cm x 1.8cm PCB for easy integration.
• Reliable Chipset: Uses ENC28J60/SS for stable performance.
• High-Speed Communication: Features a 25MHz crystal oscillator.
• SPI Interface: Ensures efficient data transfer with 3.3V power input.

• Dual-core MPU + MCU architecture for advanced processing
• MT7688AN (580MHz, MIPS24KEc) & ATmega32U4 (8MHz, AVR)
• 32MB Flash & 128MB DDR2 RAM for efficient data handling
• Built-in Wi-Fi (802.11 b/g/n) & Ethernet support

The AT89S51 is a low-power, high-performance CMOS 8-bit microcontroller from Atmel’s 8051 family. This microcontroller is designed for a wide range of applications, offering robust performance and flexibility. It features 4KB of Flash programmable and erasable read-only memory (PEROM) and 128 bytes of RAM, making it suitable for various embedded systems.

• Converts SOP28, SOIC28, and SO28 to DIP28 format
• 1.27mm pin pitch for compatibility with various ICs
• 28-pin socket for versatile use
• Suitable for testing and programming ICs

• STM32F429ZIT6 microcontroller with 2MB Flash memory and 256KB RAM
• 2.4″ QVGA TFT LCD for display interface
• On-board ST-LINK/V2 with selection switch for standalone use
• 64 Mbit SDRAM for external memory support

• 3.2-inch 480x320 TFT LCD screen with high-quality image display and wide viewing angle.
• Equipped with SD card socket and SPIFLASH circuit for enhanced functionality.
• Compatible with Arduino UNO & MEGA 2560 development boards.
• Supports UTFT, UTFT_Buttons, and Utouch libraries for easy integration.

• SWIM Interface: For connection to the application via a pin header or a 2.54 mm pitch connector
• Voltage Supported: 1.65V to 5.5V application voltage on the SWIM interface
• Programming Modes: Supports both low-speed and high-speed SWIM modes
• Programming Speed: 9.7 Kbytes/s (low-speed) and 12.8 Kbytes/s (high-speed)

• Accurate Liquid Level Detection with 48mm depth
• Wide Voltage Compatibility from 2.0V to 5.0V
• Analog Output for smooth data processing
• Compact Design with 2.0mm mounting holes

• Dual H-Bridge Drive: Allows driving two DC motors or a stepper motor with ease.
• L298N Chip (ST NEW): High-quality, reliable control chip for efficient motor driving.
• Wide Voltage Range: Supports a drive voltage range from 5V to 35V for flexible usage in various projects.

• L9110S-chip motor driver
• Supports driving two DC motors or a 4-wire 2-phase stepper motor
• Ultra-small PCB size for easy integration
• Fixed mounting holes with a 3mm diameter for secure installation

• High-resolution 8x2 character display
• Wide operating temperature range: -20°C to +70°C
• Backlight for easy viewing in low light conditions
• Standard 5V operating voltage

• Input Voltage Range: 4V to 38V DC (up to 38V).
• Output Voltage Range: 1.25V to 36V DC (adjustable).
• Maximum Output Current: 5A.
• High efficiency of up to 96%.

• Double-Sided Design: Maximizes space for component placement and routing.
• High-Quality Material: Made from Grade A material for durability.
• Ideal for Prototyping: Perfect for DIY electronics projects and testing.
• Pre-Printed Dot Pattern: Simplifies the assembly process for easy soldering.