Specifications:

• Connector Type: Micro USB to PCB
• Adapter Type: 2.54mm DIP 5 Pin
• Compatibility: Designed to interface Micro USB connectors with PCB boards
• Pin Spacing: 2.54mm
• Number of Pins: 5
• Easy Integration: Allows seamless integration of Micro USB connectivity into PCB projects
• Compact Design: Space-saving design suitable for compact electronic devices
• Material: High-quality materials ensure durability and reliability
• Versatile: Suitable for various DIY electronics projects, prototyping, and small-scale productions.

Package:

1x Micro USB to PCB 2.54mm DIP 5 P Adapter Module

• High-Quality Material: Made from durable acrylic, offering lightweight yet sturdy protection
• Stylish Design: Black and transparent panels give it a modern and sleek appearance
• Efficient Cooling: Comes with a cooling fan and screws for better heat dissipation

• PN532 Chipset: Most popular NFC/RFID chip, used in many smartphones and NFC devices.
• Versatile Functionality: Supports reading & writing NFC tags/cards, phone communication, and NFC tag emulation.
• Compatible with Arduino: Designed for easy integration with Arduino, Raspberry Pi, and other microcontrollers.
• Multiple Protocols Supported: Works with I2C, SPI, and UART communication interfaces.

• Wide Temperature Range: Operates between -30°C to +80°C
• Low Power Consumption: Standby Current < 3mA
• Four GSM/GPRS Bands: Supports 850, 900, 1800, 1900 MHz
• Voice Communication Support: Enables voice calling and communication

• Control 16 PWM outputs using just two I2C pins
• Stackable up to 62 shields for a total of 992 PWM outputs
• Built-in PWM driver with clock, no need for continuous signals
• 5V compliant, allowing control from a 3.3V

The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microcontroller from Atmel, featuring 2KB of flash programmable and erasable read-only memory. This microcontroller is designed using high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. It provides a highly flexible and cost-effective solution for many embedded control applications.

Specifications:

• Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3 megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast mode plus)
• 2-wire serial control of focus mechanism
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10

• Chip: MPU-6050
• Power Supply: 3V-5V
• Gyroscope Range: +250, +500, +1000, +2000 °/s
• Acceleration Range: ±2, ±4, ±8, ±16 g

• Operates at 125KHz frequency for reliable RFID detection
• TTL level RS232 interface for easy microcontroller integration
• Low power consumption, working at <50mA
• Effective receiving range of 20-50mm, depending on the environment

• Durable Material: Made from high-quality aluminum for lightweight and durability.
• Precise Measurement: 0~1kg weighing range with excellent accuracy.
• Stable Output: Rated output of 1.0 ± 0.1mV/V ensures reliable data.
• High Insulation Resistance: Ensures safety and consistent performance.

• Full HD 1080P resolution with up to 120FPS for smooth video capture
• AI-powered visual recognition for advanced object detection and tracking
• Wide field of view (80°–120°) for enhanced coverage
• USB 2.0 plug-and-play compatibility for easy setup and fast data transfer

• High sensitivity IR receiver
• Extremely sensitive to wavelengths between 760-1100nm
• Power supply indicator lamp
• Comparator output indicator lamp

• High-precision laser range measurement
• Small size and easy to integrate
• Operates with IIC communication protocol
• Low power consumption, 2.8V to 5V power supply

Specifications:

• Working Voltage: DC 4V - 60V
• Trigger Signal Source:
  • High-Level Trigger: DC 3.0V-24V
  • Low-Level Trigger: DC 0.0V-0.6V
• Output Power:
  • Voltage: DC 4V-60V
  • Current: 10A at room temperature, up to 15A with additional heat dissipation
  • Power: 600W
• Signal Frequency Support: 0-2.5KHz
• Operating Temperature: -40°C to 85°C
• Size: 4.6 x 2.9 x 1.5 cm

Package:

1x High Power 600W MOS Tube FET Trigger Drive Module PWM Control High/Low Level Trigger Switch DC 4V-60V 5V 12V 24V

• High Power Output: Supports up to 1500W with a maximum current of 30A
• Wide Input Voltage Range: Accepts DC 10V - 60V input
• Adjustable Output Voltage: 12V - 90V continuously adjustable
• Constant Current Mode: Adjustable 0.8A - 20A

• One-button operation for easy countdown timer setting.
• Wide time setting range from 1 to 999 minutes.
• Controls devices with 12V DC output.
• High control capacity of 10A for powerful devices.