• Wide Detection Range: 120°/180° detection angle with a range of up to 12 meters (± 2m)
• Adjustable Settings: Ambient light sensitivity and time-delay (5 seconds to 12 minutes) can be adjusted
• High Load Capacity: Suitable for 500W resistive load (e.g., incandescent lamps) and 150W inductive load (e.g., LED, energy-saving lamps)
• Weatherproof Design: IP44 rated, ideal for both indoor and outdoor use

• Operating Voltage: 5V DC
• Max. Sensing Distance: 700 cm
• Sensing Angle: 15°
• Average Current Consumption: 2mA

• Oscillator for generating clock signals.
• Pattern Generator for creating specific output patterns.
• Manual Byte Generator for byte-level signal manipulation.
• Random Byte Generator for random data testing.

• Serial Baud Rate: Supports baud rates from 1200 to 460800bps.
• Working Frequency Band: Operates on 850/900/1800/1900 MHz.
• Control Mode: Uses AT commands (3GPP TS27.007).
• GPRS: Supports PPP connection and embedded TCP/IP protocol.

• Waterproof and durable for outdoor use
• Operates at a DC 5V voltage with low power consumption
• Capable of measuring distances from 25cm to 4.5m
• Acoustic emission frequency of 40kHz for accurate distance detection

• Operates at 125KHz frequency for reliable RFID detection
• TTL level RS232 interface for easy microcontroller integration
• Low power consumption, working at <50mA
• Effective receiving range of 20-50mm, depending on the environment

• WiFi and Bluetooth Support: Compatible with 802.11 b/g/n WiFi (up to 150 Mbps) and Bluetooth v4.2 (BR/EDR and BLE).
• High Sensitivity: Bluetooth radio sensitivity up to -97 dBm, supporting class-1, class-2, and class-3 transmitters.
• Versatile Interface Options: Includes SD card, UART, SPI, SDIO, I2C, PWM, GPIO, ADC, DAC, and more, suitable for a range of applications.
• Integrated Hall Sensor: Enables proximity detection.

ESP8266 NodeMCU DevKit Development Board is a powerful tool for IoT projects. This board integrates ESP8266 (ESP-12), USB to Serial, and NodeMCU firmware, making it easy to develop applications with minimal peripherals.

• Incorporates ESP8266 (ESP-12)
• USB to Serial integrated
• NodeMCU firmware pre-installed
• 10 GPIO ports
• Supports AT Command and Lua programming

Ideal for developing applications with ease.

• Light Detection: Detects ambient brightness and light intensity.
• Adjustable Sensitivity: Sensitivity can be adjusted via the blue digital potentiometer.
• Wide Voltage Range: Operates within 3.3V to 5V voltage range.
• Digital Output: Provides digital switching outputs (0 and 1) via the D0 pin.

• Wide Input Voltage Range: Operates with DC 5V to 12V input voltage.
• High Power Output: Delivers 120W of power for induction heating.
• Efficient Induction Heating: Designed for high-frequency induction heating applications.
• Compact Size: 8x4cm in size, easy to integrate into various setups.

• 12-bit Resolution: Provides high precision for analog-to-digital conversion.
• I2C Interface: Simple and efficient communication with microcontrollers.
• Multiple Input Channels: Supports 4 Single-Ended or 2 Differential Inputs, allowing versatile sensor connections.
• Adjustable Gain: Programmable Gain Amplifier with multiple input voltage ranges for flexible use.

• 16-button keypad for microcontroller expansion
• 4x4 matrix layout for easy interfacing
• Durable PCB design for long-term use
• Compatible with Arduino and other MCUs

Specifications:

• Type: WS2812 Lamp Bead Driver Board
• Voltage: 5V
• Color Modes: Full color, running water, seven color gradient, dazzle RGB
• Control: Microcontroller connection
• Wiring: Positive power line (+5V/VCC), ground wire (GND), signal line (DI)

Package:

1x Phantom Controller

• DC-DC Step-Up BOOST Module: Converts DC voltage from 1.5V-12V to 12V output with high efficiency.
• High Efficiency: Efficiency ranges from 57% to 92%, ensuring effective power conversion.
• Wide Input Voltage Range: Works with input voltage between 1.5V and 12V, making it versatile for various applications.

• Wide Compatibility: Supports various devices with 40-pin ZIF sockets and ISP interfaces.
• High-Speed Performance: Efficient programming with fast data transfer via USB.
• Compact Design: Portable and lightweight for easy use and storage.
• Comprehensive Accessories: Includes essential adapters and cables for versatile applications.

The PIC16F877A is one of the most renowned microcontrollers in the industry, known for its convenience and ease of programming. This microcontroller uses FLASH memory technology, allowing it to be written and erased multiple times. With a total of 40 pins, including 33 for input and output, it is widely used in various PIC microcontroller projects and digital electronics circuits.