Microcontroller Units (MCUs)

• Fully compatible with original electrical and physical interfaces for serial transparent Bluetooth.
• Built-in industrial transparent transmission firmware V3.0 for stability and reliability.
• Integrated high-performance WiFi module ESP-M2.
• Supports seamless transparent transmission between serial and WiFi.

• Integrated NRF24l01 V3.0 module for wireless communication.
• Built on the ATmega328P microcontroller.
• 32 KB flash drive, with 2 KB used by the bootloader.
• 8 Analog I/O pins for varied sensor integration.

• Compatible with ESP-07 WiFi Module for seamless integration
• Onboard 3.3V Voltage Regulator for stable power supply
• Level Conversion Circuit for easy 5V microcontroller compatibility
• Compact PCB Design for space-saving applications

• Dual-core 240MHz CPU with high-speed processing
• WiFi, Bluetooth Classic, and BLE support
• 520KB SRAM, capable of running FreeRTOS, MicroPython, and more
• Compact 25.2mm x 18mm size with onboard antenna

• Microcontroller: STM32F407VGT6 ARM Cortex-M4 core
• Clock Speed: Up to 168 MHz
• Flash Memory: 512KB of flash memory
• RAM: 192KB of RAM

• Work Frequency: 72 MHz
• Memory: 64KB flash memory and 20KB SRAM
• Power Supply: 2.0-3.6V
• I/O: General-purpose I/O pins

• SWIM Interface: For connection to the application via a pin header or a 2.54 mm pitch connector
• Voltage Supported: 1.65V to 5.5V application voltage on the SWIM interface
• Programming Modes: Supports both low-speed and high-speed SWIM modes
• Programming Speed: 9.7 Kbytes/s (low-speed) and 12.8 Kbytes/s (high-speed)

• Built-in CP2102 USB to serial converter for easy connectivity
• Supports multiple operating modes: STA, AP, STA+AP
• Integrated TCP/IP protocol stack with support for up to 5 TCP clients
• Supports various functions: GPIO, PWM, I2C, ADC

• Based on ESP-8266EX chip for enhanced Wi-Fi functionality.
• Compatible with Arduino IDE for easy programming.
• 11 x I/O pins for various input/output operations.
• 1 x ADC pin with input range of 0-3.3V for analog inputs.

• High-performance microcontroller with dual-core Arm Cortex-M0+ running up to 133 MHz.
• Large memory capacity with 264KB on-chip SRAM and 2MB onboard QSPI Flash.
• Versatile connectivity with 26 GPIO pins, including 3 analogue inputs, 2 UARTs, 2 SPIs, 2 I2Cs, and 16 PWM channels.
• Flexible power input range from 1.8V to 5.5V DC, suitable for various applications.

• Wi-Fi Standard: 802.11 b/g/n
• Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
• Integrated TCP/IP Protocol Stack: Enables easy communication over the internet
• Integrated TR Switch, Balun, LNA, Power Amplifier: For enhanced signal output

• ARM Cortex-M0+ 32-bit CPU running at up to 48MHz
• 256KB Flash memory for program storage
• 32KB SRAM for data storage
• USB Type-C connectivity for easy interfacing and power

• Model Number: WiFi-R3-AT328-ESP8266-32MB-CH340G
• Microcontroller (MCU): ATmega328P
• WiFi Module: ESP8266 (32Mb memory)
• USB Converter: CH340G

• Wireless Standard: 802.11 b/g/n
• Operating Modes: STA, AP, STA + AP
• Built-in TCP/IP Protocol Stack for multiple TCP Client connections (5 MAX)
• GPIO Ports: D0 ~ D8, SD1 ~ SD3 (15mA drive capability)

• ESP32 Chipset: 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
• Memory: 4MB QSPI flash, 8MB PSRAM
• GSM/GPRS Module: Supports Nano SIM cards for GSM communication
• Wi-Fi & Bluetooth: 802.11 b/g/n (150Mbps) and Bluetooth v4.2BR/EDR & BLE

• Compact Design for easy integration into projects with limited space
• Multiple Voltage Options: Available in both 3.3V and 5V versions
• Versatile I/O Pins: 12 Digital I/O Pins (5 with PWM output) and 8 Analog Inputs
• Low Power Consumption ideal for battery-powered projects

• Combines ATmega2560 and ESP8266 Wi-Fi module for IoT applications
• 32Mb memory for enhanced data storage
• Supports Wi-Fi 802.11 b/g/n 2.4 GHz connectivity
• Compatible with Arduino Mega and NodeMCU environments

• USB interface: Full-speed 12 Mbits/s USB connection to host PC for seamless programming
• Real-time execution: Supports real-time debugging and execution of code
• MPLAB IDE compatible: Includes a free copy of MPLAB IDE for development
• Over-voltage/short circuit monitor: Built-in protection for safe operation

• Functions like the Arduino Mega 2560 with ATmega2560 (16MHz) for stable and reliable operation
• Uses CH340G chip for UART-USB conversion, ensuring stable data exchange at 12MHz
• Connects to the computer via micro USB cable, compatible with most Android smartphones

• Wide Voltage Range: Runs from 2V to 5V, offering flexibility for different power sources.
• Automatic Reset: The latest version includes automatic reset for easy programming.
• Flat Backside: The backside is completely flat, providing a cleaner and more versatile design.

• Arduino IDE Support: Compatible with Arduino IDE 1.0+ (OSX / Windows / Linux)
• Flexible Power Options: Supports 5V via USB or 7-24V external power supply (Recommended 12V or lower)
• Built-in Voltage Regulator: 500mA 5V onboard regulator with automatic power selection

• Integrated WiFi and Bluetooth support for wireless connectivity.
• Compact design with dimensions of 40 x 27 x 12mm for easy integration.
• 4MB Flash Memory and 520kB SRAM for storage and processing.

• STM8S103F3 Chip: Features 640 bytes of EEPROM for better data storage and retrieval.
• Flash Memory: 8K bytes of Flash memory (compared to the 4K bytes on STM8S103F2).
• Higher Endurance: Supports up to 10,000 Flash erase cycles, offering improved reliability for development.

• Micro USB Port: Easy connectivity with computers and power sources
• Pins: 11 digital input/output pins
• Advanced Functionality: Supports Interrupt, PWM, I2C, and One-Wire
• Analog Input: 1 analog input (maximum 3.2V)

• Arduino IDE Compatibility: Supports Arduino IDE 1.0+ (OSX/Win/Linux).
• Power Supply: Can be powered via USB or external source (5V or 7-35V, with automatic selection).
• On-board Regulator: Equipped with a 500mA 5V Regulator.
• USB Support: Built-in USB for programming and serial debugging.

• SCM Chip: Powered by ATtiny13A for compact, low-power applications.
• I/O Ports: All I/O ports are led out and clearly tagged for easy access.
• ISP Interface: Equipped with an onboard ISP interface for programming and debugging.
• Reliable Reset Circuit: Includes a reliable reset circuit for consistent operation.

• 802.11 b/g/n Wi-Fi protocol
• 2.4 GHz frequency, supports WPA/WPA2 encryption
• Ultra-compact size: 11.5mm x 11.5mm
• Integrated 10-bit ADC and TCP/IP protocol stack

• Mini WIFI board based on the ESP-8266EX chipset
• 11 digital input/output pins, with interrupt/pwm/I2C/one-wire support (except D0)
• 1 analog input (max 3.3V input)
• Micro USB connection for easy integration

The Arduino Due R3 is a powerful microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. With 54 digital input/output pins (12 PWM outputs), 12 analog inputs, 4 UARTs, and an 84 MHz clock, it's perfect for larger scale projects. The Due R3 also features USB OTG, 2 DACs, and a range of connectivity options, making it versatile for various applications. Ideal for advanced electronics projects and Android integration.

Key Features:

• 54 digital I/O pins (12 PWM outputs)
• 12 analog input pins
• 4 UARTs for serial communication
• 84 MHz clock speed
• USB OTG capable
• 2 DACs (digital to analog converters)
• Power jack, SPI header, JTAG header, reset button, and erase button

Product Overview: The Arduino Uno - R3 (Original) Italy is a powerful microcontroller board based on the ATmega328P, designed for a variety of electronics projects. It’s ideal for both beginners and professionals.

Key Features:

• Microcontroller: ATmega328P
• Operating Voltage: 5V
• Input Voltage (recommended): 7-12V
• Input Voltage (limit): 6-12V
• Digital I/O Pins: 14 (6 provide PWM output)
• PWM Digital I/O Pins: 6
• Analog Input Pins: 6
• DC Current per I/O Pin: 20 mA
• DC Current for 3.3V Pin: 50 mA
• Flash Memory: 32KB (0.5 KB used by bootloader)
• SRAM: 2 KB
• EEPROM: 1 KB
• Clock Speed: 16 MHz
• LED_BUILTIN: 13
• Dimensions: 68.6 mm x 53.4 mm
• Weight: 25 g