• 2K Memory, 256 x 8 bits or 128 x 16 bits
• Three-Wire Serial Interface
• Self-Timed ERASE and WRITE Cycles

Key Features:

• 8-bit resolution for precise analog-to-digital conversion
• 10k sampling rate per second
• Parallel data interface for easy data processing
• Single supply voltage source
• Through hole mounting for secure connection
• 875mW maximum power dissipation

Key Features:

• Part NO.: M74HC161B1R
• Package: 16-DIP
• Logic Type: Binary Counter
• Direction: Up
• Number of Elements: 1
• Number of Bits per Element: 4
• Reset: Asynchronous
• Timing: Synchronous
• Count Rate: 62MHz
• Trigger Type: Positive Edge
• Voltage Supply: 2 V ~ 6 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Supplier Device Package: 16-DIP

• Output Voltage: Fixed at 3.3V
• Output Current: Capable of supplying 1A
• Low Dropout Voltage: Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

• Low power consumption with a max supply current of just 1.3 mA.
• Very low input offset voltage of 50 μV, ensuring high precision.
• High bandwidth of 120 kHz for accurate signal amplification.
• Low input offset drift of 0.6 μV/°C for stable performance.

The 4N25 Optoisolator is a high-quality component designed for electrical isolation and efficient signal transmission. Featuring a 6-pin configuration, it provides robust performance with a voltage isolation of 7500Vpk and a current transfer ratio of at least 20% at 10mA. Ideal for through hole mounting.

Key Features:

• Category: Isolators
• Family: Optoisolators - Transistor, Photovoltaic Output
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 7500Vpk
• Current Transfer Ratio (Min): 20% @ 10mA
• Voltage - Output: 30V
• Current - DC Forward (If): 60mA
• Vce Saturation (Max): 500mV
• Output Type: Transistor with Base
• Mounting Type: Through Hole
• Package / Case: 6-DIP (0.300", 7.62mm)

100% Brand New and High Quality

Key Features:

• Compact, serial input/output common-cathode display driver
• Interfaces with microprocessors (µPs)
• Supports 7-segment numeric LED displays up to 8 digits, bar-graph displays, or 64 individual LEDs
• 10MHz Serial Interface
• Individual LED Segment Control
• Decode/No-Decode Digit Selection
• 150µA Low-Power Shutdown (Data Retained)
• Digital and Analog Brightness Control
• Display Blanked on Power-Up
• Drives Common-Cathode LED Display
• Slew-Rate Limited Segment Drivers for Lower EMI (MAX7221)
• SPI, QSPI, Microwire Serial Interface (MAX7221)
• Available in 24-Pin DIP and SO Packages

• Type: Priority Encoder
• Circuit Configuration: 1 x 8:3
• Independent Circuits: 1
• Output Current: 5.2mA (High), 5.2mA (Low)

74LS14 Schmitt Trigger Inverter

The 74LS14 Schmitt Trigger Inverter IC is a must-have for any electronics enthusiast or professional. Designed with high noise immunity and improved line-receiving characteristics, this IC ensures reliable performance even in challenging environments. Key features include:

• Base Number: 7414
• Supply Voltage: 4.75 to 5.25V
• Propagation Delay: 15ns
• Package Type: 14-DIP
• Operating Temperature: 0°C to +70°C
• Operation from very slow edges
• High noise immunity

• Output Voltage: 1.8V
• Output Current: 1A
• Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

• 20 Pin DIP package for easy integration.
• Eight D-type flip-flops with a common clock.
• Edge-triggered for reliable operation.
• Parallel In and Out functionality.

• Multi-standard vision IF circuit with an alignment-free PLL demodulator without external components
• Integrated chrominance trap circuit
• Black stretching of non-standard CVBS or luminance signals
• Blue stretch circuit which offsets colours near white towards blue

• Large input voltage range, suitable for various applications.
• No latch-up, ensuring stable operation.
• High gain, providing excellent signal amplification.
• Short-circuit protection, increasing durability.

• Quad 3-state buffer with non-inverting logic.
• Wide operating voltage range of 4.75V to 5.25V.
• Output current rating of 8mA.
• Suitable for temperature ranges of 0°C to 70°C.

CD4071 Quad 2-Input OR Gate

The CD4071 is a versatile quad 2-input OR gate IC, ideal for various digital logic applications. It offers reliable performance and wide operating voltage range, making it suitable for many electronic designs. Key features include:

• Dual Input OR Gate – Quad Package
• Typical Operating Voltage: 5V
• Operating Voltage Range: -0.5V to +20V
• DC Input Current: ±10mA
• Power Dissipation: 500mW
• Minimum Logic Low Voltage @ +5V: 1.5V
• Minimum Logic High Voltage @ +5V: 3.5V
• Propagation Delay @ 5V: 250ns (maximum)
• Transition Time @ 5V: 200ns (maximum)
• Available in 14-pin PDIP, GDIP, PDSO packages

The TL084 is part of the TL08x family of JFET-input operational amplifiers, designed for high performance with low power consumption. It features high slew rates, low input bias and offset currents, and a wide common-mode and differential voltage range. This makes it ideal for a variety of applications, including audio processing and signal amplification.