The IC Base 18-Pin Socket Connector offers reliable connectivity and secure placement for integrated circuits. Ideal for various electronic projects, it features a robust design and precise pin alignment.

• 64K Memory, 8k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

• Supports Binary-Coded Decimal (BCD) counting with up and down directions.
• High-speed operation with a count rate of up to 35 MHz.
• Synchronous operation for precise and reliable performance.
• Wide operating voltage range from 2V to 6V.

CD4011 Quad 2-Input NAND Gate

The CD4011 Quad 2-Input NAND Gate is an essential component for various electronic applications. Featuring high noise immunity and standardized symmetrical output characteristics, this IC ensures reliable performance across different voltage levels. Key features include:

• VDD: 10 V
• Buffered inputs and outputs
• Symmetrical output characteristics
• Maximum input current: 1 µA at 18 V over full package temperature range
• Quiescent current tested at 20 V
• 5-V, 10-V, and 15-V parametric ratings
• High noise immunity

Product Overview: The Gravity Analog TDS Sensor Module SEN0244 is designed to measure the Total Dissolved Solids (TDS) in water, providing reliable data on water quality, solubility, and conductivity.

Key Features:

• Input Voltage: 3.3~5.5V
• Output Signal: 0~2.3V
• Working Current: 3~6mA
• TDS Measurement Range: 0~1000ppm
• TDS Measurement Accuracy: +/- 10% F.S. at 25°C
• Module Interface: PH2.0-3P
• Electrode Interface: XH2.54-2P
• Probe Number: 2
• Overall Length: 83cm
• Connection Interface: XH2.54-2P
• Color: Black
• Material: Plastic
• Size: 4.3x3.3cm

The MOC3041 DIP6 6-Pin Zero-Cross Optoisolator Triac Driver Output is designed for reliable electrical isolation and precise control of AC power. Featuring a voltage isolation of 400V and a current transfer ratio of 19% to 50%, it ensures efficient signal transmission. This optoisolator is ideal for through hole mounting.

Key Features:

• Part Number: MOC3041
• Package: 6-Pin DIP (0.300, 7.62mm)
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 400V
• Current Transfer Ratio (Min): 19% @ 16mA
• Current Transfer Ratio (Max): 50% @ 16mA
• Voltage - Output: -0.5 ~ 20V
• Current - Output / Channel: 8mA
• Current - DC Forward (If): 25mA
• Mounting Type: Through Hole

Supplier: SICSTOCK

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

KA3525 SMPS Controller IC

The KA3525 is a versatile and efficient Switched-Mode Power Supply (SMPS) controller IC, ideal for power regulation and conversion applications. Key features include:

• SMPS Controller
• Output Current: 500mA
• Reference Output Current: 50mA
• Oscillator Charging Current: 5mA
• Power Dissipation: 1000mW
• Reference Output Voltage: 5.01V
• Line Regulation: 9mV
• Load Regulation: 20mV
• Maximum Oscillator Frequency: 430KHz
• Package: DIP-16

Key Features:

• LA4597 IC Audio Power Amplifier by Sanyo™.
• 2-Channel AF Power Amplifier.
• Equivalent to SONY 5-875-230-39, NTE7204.
• New Condition.
• ZIP-13 package.

The STK4192 II 2-Channel 50W AF Power Amplifier, an original piece, delivers superior audio amplification for both home and professional settings. Its robust construction ensures high fidelity and durability.

• Quad 3-state buffer with non-inverting logic.
• Wide operating voltage range of 4.75V to 5.25V.
• Output current rating of 8mA.
• Suitable for temperature ranges of 0°C to 70°C.

• Adjustable 3-terminal positive voltage regulator
• Output voltage range: 1.25V to 33V
• Maximum output current: 3A
• Maximum input-output voltage difference: 35V (recommended 15V)

• Low Voltage Operation: Supports 2.7V to 5.5V (Standard Voltage) and 1.8V to 3.6V (Low Voltage)
• Memory Size: 256K bits, organized as 16,384 x 8 or 32,768 x 8
• Data Transfer: Two-wire serial interface for easy integration

• Noise Suppression: Schmitt Trigger, filtered inputs to reduce noise

• 2K Memory, 256 x 8 bits
• Two-Wire Serial Interface
• Write Protect Pin for Hardware Data Protection

The CD4046 IC is a versatile CMOS micropower phase-locked loop (PLL) designed for a wide range of applications. Key features include:

• Low-power, linear voltage-controlled oscillator (VCO)
• Two different phase comparators with common signal-input amplifier
• 5.2-V zener diode for supply regulation
• Available in various 16-lead packages

Perfect for FM demodulation, frequency synthesis, and more.

The D4SBL20 Flat Bridge Rectifier is designed for efficient AC to DC conversion in various electronic applications. With a robust design and high surge current capability, it ensures reliable performance and low power loss.

• Forward Current: 4A
• Reverse Voltage: 200V
• High Efficiency: Ensures optimal performance and lower power loss
• Super Fast Recovery: Ideal for high-frequency applications