• High precision and stability timing capability
• Operates in Astable and Monostable modes
• Wide range of operating voltages up to 18V
• TTL-compatible output for easy integration

The CD4050 Hex Buffer Converter is a versatile component designed for various logic level conversion and buffering applications. It offers a wide supply voltage range and high current capability. Key features include:

• Wide supply voltage range: 3.0V to 15V
• Direct drive to 2 TTL loads at 5.0V over full temperature range
• High source and sink current capability
• Special input protection permits input voltages greater than VDD

• Multi-standard vision IF circuit with an alignment-free PLL demodulator without external components
• Integrated chrominance trap circuit
• Black stretching of non-standard CVBS or luminance signals
• Blue stretch circuit which offsets colours near white towards blue

Specifications:

• Technology: Si    
• Mounting Style: SMD/SMT    
• Package/Case: TO-263-7    
• Transistor Polarity: N-Channel    
• Number of Channels:1 Channel    
• Vds - Drain-Source Breakdown Voltage: 30 V    
• Id - Continuous Drain Current:180 A    
• Rds On - Drain-Source Resistance: 1.05 mOhms    
• Vgs - Gate-Source Voltage: - 16 V, + 16 V    
• Vgs th - Gate-Source Threshold Voltage: 1.5 V    
• Qg - Gate Charge: 187 nC    
• Minimum Operating Temperature: - 55 C    
• Maximum Operating Temperature: + 175 C    
• Pd - Power Dissipation: 188 W    
• Channel Mode:Enhancement    
• Qualification: AEC-Q101    
• Tradename: OptiMOS    
• Series: OptiMOS-T2    
• Packaging: Reel    
• Height: 4.4 mm    
• Length:10 mm    
• Product Type:  MOSFET   
• Rise Time: 5 ns    

Package:

1x 4N03L01 IPB180N03S4L-01 TO-263-7 30V 180A SMD Triode

• Dual 1:4 line demultiplexer functionality.
• Independent strobe inputs for each section.
• Common binary address inputs (A, B, C).
• Available in a single 16-pin package.

Key Features:

• LA4597 IC Audio Power Amplifier by Sanyo™.
• 2-Channel AF Power Amplifier.
• Equivalent to SONY 5-875-230-39, NTE7204.
• New Condition.
• ZIP-13 package.

The CD4066BE is a high-performance quad bilateral switch IC designed for the transmission or multiplexing of analog or digital signals. Key features include:

• Pin-for-pin compatible with CD4016B
• Lower on-state resistance
• Four bilateral switches with independent controls

Ideal for analog and digital signal applications.

The CD4046 IC is a versatile CMOS micropower phase-locked loop (PLL) designed for a wide range of applications. Key features include:

• Low-power, linear voltage-controlled oscillator (VCO)
• Two different phase comparators with common signal-input amplifier
• 5.2-V zener diode for supply regulation
• Available in various 16-lead packages

Perfect for FM demodulation, frequency synthesis, and more.

The ICL-7660 CMOS Voltage Converter offers simple conversion of +5V to ±5V supplies with a wide supply range from 1.5V to 10V. It's designed for simple voltage multiplication and boasts a typical open circuit conversion efficiency of 99.9%. This IC requires minimal external components, making it an efficient and effective solution for your voltage conversion needs.

Key Features:

• Simple Conversion of +5V to ±5V Supplies
• Simple Voltage Multiplication
• Typical Open Circuit Conversion Efficiency 99.9%
• Wide Supply Range 1.5V to 10V
• Minimal External Components Required

• Single-chip TV processor for PAL/NTSC applications
• Integrated DC-coupled vertical deflection circuit
• Alignment-free horizontal oscillator
• I²C-bus control for easy configuration

The D4SBL20 Flat Bridge Rectifier is designed for efficient AC to DC conversion in various electronic applications. With a robust design and high surge current capability, it ensures reliable performance and low power loss.

• Forward Current: 4A
• Reverse Voltage: 200V
• High Efficiency: Ensures optimal performance and lower power loss
• Super Fast Recovery: Ideal for high-frequency applications

ICL7107 3+1/2 Digit LED Driver with A/D Converter

The ICL7107 3+1/2 Digit LED Driver with A/D Converter is a high-performance, low-power component designed for precise analog-to-digital conversion. It features guaranteed zero reading for 0V input, true polarity at zero, 1pA typical input current, and low noise. With on-chip clock and reference, it simplifies design and improves accuracy. Ideal for digital panel meters and various measurement applications.

• Guaranteed Zero Reading for 0V Input
• True Polarity at Zero
• 1pA Typical Input Current
• Low Noise
• On-Chip Clock and Reference
• High Accuracy and Versatility
• Ideal for Digital Panel Meters

The MOC3052 Triac Driver IC is designed for high-current control applications, featuring a GaAs infrared emitting diode optically coupled to a non-zero-crossing silicon bilateral AC switch (triac). Ideal for random phase control of high current triacs or thyristors in Bangladesh.

Key Features:

• High isolation voltage
• Random phase control
• High current handling capability
• 6-Pin DIP package
• Enhanced static dv/dt capability

• High-performance Dual Complementary Pair with Inverter IC
• Wide supply voltage range: 3V to 18V
• Operates across a broad temperature range: -55°C to +125°C
• Compact 14-DIP package with a 0.300" (7.62mm) width

The MOC3041 DIP6 6-Pin Zero-Cross Optoisolator Triac Driver Output is designed for reliable electrical isolation and precise control of AC power. Featuring a voltage isolation of 400V and a current transfer ratio of 19% to 50%, it ensures efficient signal transmission. This optoisolator is ideal for through hole mounting.

Key Features:

• Part Number: MOC3041
• Package: 6-Pin DIP (0.300, 7.62mm)
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 400V
• Current Transfer Ratio (Min): 19% @ 16mA
• Current Transfer Ratio (Max): 50% @ 16mA
• Voltage - Output: -0.5 ~ 20V
• Current - Output / Channel: 8mA
• Current - DC Forward (If): 25mA
• Mounting Type: Through Hole

Supplier: SICSTOCK

The CD4049 CMOS Hex Inverting Buffer/Converter is designed for efficient logic-level conversion and high-performance buffering. Key features include:

• Inverting (CD4049UB) and noninverting (CD4050B) hex buffers.
• High sink current capability for driving two TTL loads.
• Supports high-to-low level logic conversion using a single supply voltage (VCC).
• Maximum input current of 1 µA at 18 V over the full temperature range.
• 5V, 10V, and 15V parametric ratings for versatile applications.