The 4N25 Optoisolator is a high-quality component designed for electrical isolation and efficient signal transmission. Featuring a 6-pin configuration, it provides robust performance with a voltage isolation of 7500Vpk and a current transfer ratio of at least 20% at 10mA. Ideal for through hole mounting.

Key Features:

• Category: Isolators
• Family: Optoisolators - Transistor, Photovoltaic Output
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 7500Vpk
• Current Transfer Ratio (Min): 20% @ 10mA
• Voltage - Output: 30V
• Current - DC Forward (If): 60mA
• Vce Saturation (Max): 500mV
• Output Type: Transistor with Base
• Mounting Type: Through Hole
• Package / Case: 6-DIP (0.300", 7.62mm)

100% Brand New and High Quality

• Type: Decoder/Demultiplexer
• Circuit Configuration: 1 x 3:8
• Independent Circuits: 1
• Output Current (High, Low): 5.2mA, 5.2mA

Discover the Juried Engineering TL081CP High Slew Rate JFET-Input Op-Amp, the perfect addition to your electronic projects. This breadboard-friendly DIP-8 operational amplifier offers low power consumption with high slew rates and low input bias. Key features include:

• Low Power Op-Amp with High Slew Rates, Low Input Bias and Offset Currents
• Input Offset Voltage: 3 mV
• Input Offset Current: 5 pA
• Input Bias Current: 30 pA
• Common Mode Rejection: 86 dB
• Supply Current: 1.4 mA per amplifier
• Supply Voltage: ±3V to ±15V

• Hex inverter buffer/driver with open-collector outputs
• High-voltage output (up to 30V) for driving external loads
• TTL-compatible inputs for seamless integration
• Wide operating temperature range (0°C to 70°C)

The MOC3041 DIP6 6-Pin Zero-Cross Optoisolator Triac Driver Output is designed for reliable electrical isolation and precise control of AC power. Featuring a voltage isolation of 400V and a current transfer ratio of 19% to 50%, it ensures efficient signal transmission. This optoisolator is ideal for through hole mounting.

Key Features:

• Part Number: MOC3041
• Package: 6-Pin DIP (0.300, 7.62mm)
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 400V
• Current Transfer Ratio (Min): 19% @ 16mA
• Current Transfer Ratio (Max): 50% @ 16mA
• Voltage - Output: -0.5 ~ 20V
• Current - Output / Channel: 8mA
• Current - DC Forward (If): 25mA
• Mounting Type: Through Hole

Supplier: SICSTOCK

The LM556 Dual Timer IC is a versatile component designed for precise timing applications. It combines two 555 timers in one package, offering flexibility and efficiency. Key features include:

• Timing from microseconds through hours
• Operates in both astable and monostable modes
• Replaces two 555 timers
• Adjustable duty cycle
• Output and supply TTL compatible
• Normally on and normally off output

The CD4050 Hex Buffer Converter is a versatile component designed for various logic level conversion and buffering applications. It offers a wide supply voltage range and high current capability. Key features include:

• Wide supply voltage range: 3.0V to 15V
• Direct drive to 2 TTL loads at 5.0V over full temperature range
• High source and sink current capability
• Special input protection permits input voltages greater than VDD

• Hex Inverter IC with six inverters
• Maximum Current Output: 8mA per gate
• Supply Voltage Range: 4.75V to 5.25V
• Maximum Supply Voltage: 7V

• Contains a divide-by-two section and a divide-by-eight section
• Sections can be combined to form BCD, modulo-12, or modulo-16 counters
• Low power dissipation
• Operating temperature up to 70°C

The ICL-7660 CMOS Voltage Converter offers simple conversion of +5V to ±5V supplies with a wide supply range from 1.5V to 10V. It's designed for simple voltage multiplication and boasts a typical open circuit conversion efficiency of 99.9%. This IC requires minimal external components, making it an efficient and effective solution for your voltage conversion needs.

Key Features:

• Simple Conversion of +5V to ±5V Supplies
• Simple Voltage Multiplication
• Typical Open Circuit Conversion Efficiency 99.9%
• Wide Supply Range 1.5V to 10V
• Minimal External Components Required

Product Overview: The IC 74150 16-Line to 1-Line Data Selector/Multiplexer is designed for efficient data selection and multiplexing in digital systems, housed in a reliable package.

Key Features:

• Supply Voltage: 7V
• Input Voltage: 5.5V
• Operating Free Air Temperature: 0°C to +70°C
• Storage Temperature Range: -65°C to +150°C
• Package: 1x IC 74150 16-Line to 1-Line Data Selector/Multiplexer

The 74LS157 is a high-speed Quad 2-Input Multiplexer IC, designed for use in data selection and signal routing in digital circuits. Each IC contains four independent 2-to-1 multiplexers, allowing the selection of one of two data inputs per channel. This versatile multiplexer supports a single supply voltage, making it ideal for various logic and switching applications. The device is available in a DIP16 package, ensuring compatibility with standard through-hole mounting designs.

• RoHS compliant
• Step-down voltage regulator
• Wide input voltage range (5V~32V)

• Output current up to 1.5 A
• Output voltage of 10 V
• Thermal overload protection
• Short circuit protection

• Two Independent JK Flip-Flops with Clock and Clear Inputs.
• Fast Switching Times for high-speed logic operations.
• Standard Pin Arrangement for easy circuit integration.
• Standard TTL Switching Voltages for compatibility with digital circuits.

The MAX7219CWG 8-Digit LED Display Driver is a highly efficient solution for controlling up to eight 7-segment LED displays. This versatile driver supports a data multiplexer, enhancing its capabilities with cursor functionality for both data entry and readout applications.

• IC Compatibility: MAX7219, MAX7221
• Display Type: 7 Segment LED
• Control Interface: Serial
• Special Features: Cursor function for data entry