• 14-bit binary counter/divider.
• Wide operating voltage range (3V to 18V).
• High clock frequency capability (up to 30MHz at 15V).
• Fast reset propagation delay of 25ns at 5V.

TDA2009 Amplifier Stereo 10W High Bridge 28 Watts

The TDA2009 is a powerful stereo amplifier with high bridge configuration, delivering up to 28W of audio power. Designed for high-quality audio applications, it features a wide range of power supply options and impressive performance metrics. Key features include:

• DC power supply: 8V to 24V at 1A to 2A
• Output power rates:
  • 10W RMS/channel, 4 ohms load, 24V DC power supply
  • 6W RMS/channel, 8 ohms load, 24V DC power supply
  • 4W RMS/channel, 4 ohms load, 12V DC power supply
• S/N ratio: more than 75 dBA at 10W output
• Frequency response: 10Hz to 50kHz (-3dB)
• Distortion: 0.351% at 1kHz
• Gain: 36dB
• Input: 100mV for full output

The CD4046 IC is a versatile CMOS micropower phase-locked loop (PLL) designed for a wide range of applications. Key features include:

• Low-power, linear voltage-controlled oscillator (VCO)
• Two different phase comparators with common signal-input amplifier
• 5.2-V zener diode for supply regulation
• Available in various 16-lead packages

Perfect for FM demodulation, frequency synthesis, and more.

The LA4440 Stereo Amplifier IC is a versatile component designed for high-quality audio performance in both mono and stereo modes. Key features include:

• Built-in two channels for Mono and Stereo
• Dual mode: 6W x 2 and Bridge mode: 19W
• 46 dB Ripple rejection
• Maximum power handling: 18V, typical: 12V
• Good channel separation and low distortion
• Built-in Audio Muting function and Pin-to-Pin protection
• Surge protection circuitry

• High-Speed CMOS Decoder/Demultiplexer
• Single Supply Voltage: Operates between 2V to 6V
• 3-to-8 Line Decoder for Address Expansion
• Low Power Consumption with CMOS Technology

The 3843 Pulse-Width Modulator is a highly efficient regulator, ideal for precise power management. Suitable for operating temperatures ranging from 0 to +70°C, this modulator ensures optimal performance in various switching regulator applications.

• Model: 3843
• Category: Power Management > Regulators > Switching Regulators
• Temperature Range: 0 to +70°C

The TL084 is part of the TL08x family of JFET-input operational amplifiers, designed for high performance with low power consumption. It features high slew rates, low input bias and offset currents, and a wide common-mode and differential voltage range. This makes it ideal for a variety of applications, including audio processing and signal amplification.

• High Power Output – 68W into 4Ω at ±28V, 38W into 8Ω at ±28V, and 50W into 8Ω at ±35V
• 135W Peak Output Power capability
• High Signal-to-Noise Ratio (≥ 92dB) for clear sound
• Built-in Output Protection from short circuits and voltage spikes

• High-Performance Audio Amplifier: Designed for audio applications with high efficiency.
• Class D Technology: Provides efficient power conversion and low heat dissipation.
• Short-Circuit and Thermal Protection: Built-in safety features to protect against damage.

The LM556 Dual Timer IC is a versatile component designed for precise timing applications. It combines two 555 timers in one package, offering flexibility and efficiency. Key features include:

• Timing from microseconds through hours
• Operates in both astable and monostable modes
• Replaces two 555 timers
• Adjustable duty cycle
• Output and supply TTL compatible
• Normally on and normally off output

• High-speed operation with tpd = 10.5 ns (typ), CL = 50 pF
• High output current with a fanout of 10 LSTTL loads
• Wide operating voltage range: VCC = 2 to 6 V
• Low input current: 1 µA max

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

• 1K Memory, 128 x 8 bits or 64 x 16 bits
• Three-Wire Serial Interface
• Self-Timed ERASE and WRITE Cycles

• Provides a stable +10V output voltage
• Current output: 1A
• Ideal for power supply applications
• Easy to use with TO-220 package

The SOLID STATE KBPC3510 Bridge Rectifier Diode offers high performance for power supply circuits. Key features include:

• No. of Phases: Single
• Repetitive Reverse Voltage Vrrm Max: 1kV
• Forward Current If (AV): 35A
• Bridge Rectifier Case Style: Module
• No. of Pins: 4Pins
• Operating Temperature Max: 125°C
• Packaging: Each

The D4SBL20 Flat Bridge Rectifier is designed for efficient AC to DC conversion in various electronic applications. With a robust design and high surge current capability, it ensures reliable performance and low power loss.

• Forward Current: 4A
• Reverse Voltage: 200V
• High Efficiency: Ensures optimal performance and lower power loss
• Super Fast Recovery: Ideal for high-frequency applications