Enhance your electronic circuits with the KBPC5010 Bridge Rectifier. Key features include:

• High case dielectric strength
• High surge current capability
• High reliability and efficiency
• Low reverse current and forward voltage drop
• Pb / RoHS Free
• Maximum average forward current: 50A
• Maximum forward voltage per diode: 1.1V at 25A
• Maximum DC reverse current: 10µA
• Maximum recurrent peak reverse voltage: 1000V
• Maximum RMS voltage: 700V
• Maximum DC blocking voltage: 1000V

Ideal for converting AC to DC in power supplies and other electronic applications.

Enhance your digital circuits with the CD4040 12-Bit Binary Counter. Key features include:

• Medium-speed operation with ripple-carry binary counting
• Master-slave flip-flops for reliable counting
• Buffered inputs and outputs for stable performance
• Schmitt trigger action on input-pulse line for unlimited rise and fall times
• Common reset to all zeros state
• Available in various 16-lead packages for versatile applications

Perfect for control counters, timers, frequency dividers, and time-delay circuits.

The NE/SE 556 IC is a versatile phase-locked loop (PLL) integrated circuit that operates over a frequency range of 0.1 Hz to 500 kHz. Known for its highly stable center frequency, this IC achieves very linear FM detection. The VCO output produces TTL-compatible square waves, making it suitable for a variety of applications. The dual supply ranges from ±6V to ±12V, and it can also be operated from a single supply of 12V to 24V.

Key Features:

• Frequency range: 0.1 Hz to 500 kHz
• Highly stable center frequency
• Linear FM detection
• TTL-compatible square wave output from VCO
• Dual supply range: ±6V to ±12V
• Single supply range: 12V to 24V

• 14-bit binary counter/divider.
• Wide operating voltage range (3V to 18V).
• High clock frequency capability (up to 30MHz at 15V).
• Fast reset propagation delay of 25ns at 5V.

• C Compiler Optimized Architecture for re-entrant code
• 32KB Flash Program Memory and 2KB RAM
• Self-programming under software control
• Enhanced A/D Converter with up to 13 channels

• Decade counter functionality
• 16-pin DIP package
• Fast switching times

• 64K Memory, 8k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

• Operates at high voltage up to 20V.
• Combines both counter and decoding functions in a single IC.
• Ideal for low power displays.

• Dual JK flip-flop package with positive edge triggering.
• Supports fast operation with 16 ns input rise time and 25 ns input fall time.
• Compatible with TTL logic levels.
• Operates at a voltage range of 4.5V to 5.5V.

Discover the MCP23017, a versatile 16-bit parallel I/O port expander designed for I2C bus applications in Bangladesh. With two 8-bit ports (PORTA and PORTB) and high-speed I2C™ interfaces up to 1.7MHz, this device supports bidirectional I/O operations and can accommodate up to eight devices on the bus.

• Supply Voltage: Operates between 10V to 22V.
• Fixed Voltage Gain: Gain is fixed at 50.
• High Peak Current Capability: Supports up to 1.3A.
• High Input Impedance: 150kΩ for better signal handling.

• High-performance 8-bit microcontroller with USB 2.0 support
• 32KB Flash Memory & 1KB Dual Port RAM for efficient data handling
• 48MHz clock speed (12 MIPS performance) for fast execution
• 16 input/output endpoints (IN/OUT) for flexible communication

• Core Architecture: AVR 8-bit
• Max Frequency: 20 MHz
• Data Bus Width: 8 bits
• Memory Size: 4 kB FLASH

• High-Speed Performance: Propagation delay of approximately 20 ns.
• Multiple Input Channels: Eight data inputs with a single tri-state output.
• Versatile Package Types: Available in DIP/SOP, accommodating different project needs.
• Wide Operating Range: Operates within a 4.75V to 5.25V supply voltage.

• Power Supply Voltage Range:
  • Single Supply Vcc: 8-14V (Ta=25°C)
  • Dual Supply Vcc - Vee: ±4 - 7V (Ta=25°C)

• Wide Volume Control Range: 80dB

The CD4046 IC is a versatile CMOS micropower phase-locked loop (PLL) designed for a wide range of applications. Key features include:

• Low-power, linear voltage-controlled oscillator (VCO)
• Two different phase comparators with common signal-input amplifier
• 5.2-V zener diode for supply regulation
• Available in various 16-lead packages

Perfect for FM demodulation, frequency synthesis, and more.