• Output Voltage: 1.8V
• Output Current: 1A
• Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

The 74HC02 / 74LS02 / 7402 are quad 2-input NOR gate ICs housed in a DIP-14 package. These high-speed devices offer low input and quiescent supply currents, high output current capability, and a wide operating voltage range, making them ideal for various digital logic applications.

MCP23S17 16-Bit I/O Expander with SPI Interface

The MCP23S17 is a versatile 16-bit input/output port expander, featuring an SPI interface and interrupt output capabilities. It is perfect for expanding GPIO on microcontrollers and processors. Key features include:

• 16-bit input/output port expander with interrupt output
• Cascadable for up to 8 devices on one bus
• 25mA sink/source capability per I/O
• Supports up to 10MHz SPI clock speeds

CD4051 Single 8-Channel Multiplexer/Demultiplexer

The CD4051 8-Channel Multiplexer/Demultiplexer is a versatile and efficient IC, perfect for both digital and analog signal switching. With low "ON" resistance and high "OFF" resistance, it ensures reliable performance across various applications. Key features include:

• Wide range of signal levels: digital 3 – 15V, analog up to 15Vp-p
• Low "ON" resistance: 80Ω (typ.)
• High "OFF" resistance with minimal leakage: ±10 pA (typ.)
• Logic level conversion for digital addressing signals
• Matched switch characteristics for consistency
• Very low quiescent power dissipation
• Binary address decoding on chip

• High-Speed Performance: Propagation delay of approximately 20 ns.
• Multiple Input Channels: Eight data inputs with a single tri-state output.
• Versatile Package Types: Available in DIP/SOP, accommodating different project needs.
• Wide Operating Range: Operates within a 4.75V to 5.25V supply voltage.

The TDA2002 8W Hi-Fi Audio Power Amplifier is designed for high-quality sound in various audio applications. Key features include:

• Class B audio power amplifier
• Up to 8W Output Power
• Low harmonic and crossover distortion
• Short-circuit protection
• Thermal shutdown
• Overvoltage protection
• Low impedance drive (as low as 1.6 ohms)
• High reliability

CD4075 Triple 3-Input OR Gate DIP-14

The CD4075 is a versatile triple 3-input OR gate IC in a DIP-14 package, offering reliable medium-speed operation and standardized symmetrical output characteristics. Key features include:

• Medium-Speed Operation: t_PLH, t_PHL = 60 ns (typ.) at V_DD = 10V
• 100% tested for quiescent current at 20V
• Maximum input current: 1 µA at 18V over full package-temperature range; 100 nA at 18V and 25°C
• Standardized, symmetrical output characteristics
• Noise margin (full package-temperature range):
  • 1V at V_DD = 5V
  • 2V at V_DD = 10V
  • 2.5V at V_DD = 15V
• 5V, 10V, and 15V parametric ratings
• Meets all requirements of JEDEC Tentative Standard No. 13B

Discover the TOSHIBA TTC5200 TRANSISTOR, an NPN power transistor ideal for high-voltage audio applications. Operating at 230V and 15A, this TO3PL package transistor is perfect for power amplification in audio systems.

• Triple 3-input NAND gate for digital logic applications
• Operates at a typical voltage of 5V
• TTL-compatible for easy integration
• High-speed CMOS technology

The ULN2804 is a Darlington transistor array containing eight transistors with common emitters and integral suppression diodes for inductive loads. Each transistor can handle a peak load current of 600mA (500mA continuous) and withstand up to 50V in the off state. It is designed for high-current, high-voltage applications and can be used with various logic families.

• Provides a fixed output voltage of -10V.
• Output current capability of up to 1A.
• Designed for through-hole mounting with TO-220-3 package.
• Wide operating temperature range from 0°C to +125°C.

The STK465 is a Hybrid IC made by Sanyo Corporation, ideal for building stereo amplifiers. This 16-pin IMST Hybrid IC provides a maximum output of 30 watts per channel, with a recommended supply voltage of ±28V and a load resistance of 8Ω.

• Hybrid IC for stereo amplifiers
• Maximum Output: 30W per channel
• Supply Voltage: ±28V (Recommended)
• Load Resistance: 8Ω
• Package: 16-pin 4016

• Six independent hex buffer gates
• Open collector outputs require pull-up resistors
• Open collector type suitable for indicator lamps and relays
• Input clamping diodes

• Complies with JEDEC standard no. 7A
• CMOS input levels
• Synchronous reversible counting
• Asynchronous parallel load

• Multifunction capability for versatile use in different applications.
• Mutually exclusive outputs for more efficient circuit design.
• Demultiplexing capability for handling multiple signal channels.
• Input clamp diodes to limit high-speed termination effects.