LM311 Voltage Comparator

The LM311 is a versatile voltage comparator with low input currents, designed for a wide range of supply voltages. Key features include:

• Low input currents
• Operates over a wide range of supply voltages
• Compatible with ±15V operational amplifier supplies
• Single +5V supply for IC logic

• Multifunction capability for versatile use in different applications.
• Mutually exclusive outputs for more efficient circuit design.
• Demultiplexing capability for handling multiple signal channels.
• Input clamp diodes to limit high-speed termination effects.

The CD4070 is a quad Exclusive-OR (EX-OR) gate integrated circuit (IC) designed for a wide range of digital logic applications. Each IC contains four independent EX-OR gates, making it an essential component for systems requiring logical comparisons, parity checkers, and more. Manufactured by Harris, this IC belongs to the standard 'B' series CMOS family, delivering reliable performance across a variety of voltage levels and environmental conditions.

• Supports Binary-Coded Decimal (BCD) counting with up and down directions.
• High-speed operation with a count rate of up to 35 MHz.
• Synchronous operation for precise and reliable performance.
• Wide operating voltage range from 2V to 6V.

The MOC3052 Triac Driver IC is designed for high-current control applications, featuring a GaAs infrared emitting diode optically coupled to a non-zero-crossing silicon bilateral AC switch (triac). Ideal for random phase control of high current triacs or thyristors in Bangladesh.

Key Features:

• High isolation voltage
• Random phase control
• High current handling capability
• 6-Pin DIP package
• Enhanced static dv/dt capability

• Type: Integrated Circuit (IC)
• Function: Microcontroller-based IC
• Pin Count: Typically 28 pins
• Packaging: DIP (Dual In-line Package)

• Dual operational amplifier in a single package
• High gain and wide bandwidth
• Compatible with standard op-amp circuits
• Low power consumption

The TLP250 Optocoupler from TOSHIBA features a GaAlAs light emitting diode and an integrated photodetector in an 8-lead DIP package. Ideal for gate driving circuits of IGBT or power MOSFET in Bangladesh.

Key Features:

• High-speed performance
• High isolation voltage
• Reliable gate driving for IGBT/MOSFET
• Compact 8-lead DIP package
• Wide operating temperature range

The KBPC610 IR 1~ Rectifier Bridge 6A 1000V is a robust and reliable solution for converting AC to DC in various industrial and consumer equipment. This single-phase bridge rectifier, consisting of four diodes in a full bridge configuration, ensures efficient and compact performance.

• Single phase encapsulated bridge rectifier
• Maximum Recurrent Peak Reverse Voltage (Vrrm): 1000V
• Average Forward Current (Itav): 6A
• Maximum Forward Surge Current (Ifsm): 125A @ 50Hz
• Package: D-72

The NE555 is a versatile single precision timer IC widely used in various electronic circuits. It is known for its reliability and ease of use, making it a popular choice for both hobbyists and professionals. Here are some key specifications and features of the NE555:

• Power Supply Voltage Range:
  • Single Supply Vcc: 8-14V (Ta=25°C)
  • Dual Supply Vcc - Vee: ±4 - 7V (Ta=25°C)

• Wide Volume Control Range: 80dB

The 78M05 SMD 7805 Voltage Regulator is a reliable component for providing stable 5V output. With a TO-252 footprint and a maximum output current of 500mA, it ensures efficient performance in a wide range of electronic applications.

• Chip: 78M05
• Number of output channels: 1
• Number of Pins: 3
• Output Current: 500mA
• Footprint: TO-252
• Operating temperature range: -40°C to +125°C
• Voltage Rectifier Type: 3-Terminal Fixed Positive
• Power supply voltage: 7V-20V

TDA7388 IC Power Amplifier Chip - 4x45W Class-AB

Enhance your audio projects with the TDA7388 IC Power Amplifier Chip. This high-output Class-AB amplifier delivers up to 4x45W of power, ensuring low distortion and minimal noise for superior sound quality.

• Package: Flexiwatt25/ZIP25
• Power: 4W
• Working Current: 350mA
• Working Voltage: 18V
• Type: Class-AB
• Installation: SMD/SMT
• Packing: Tube
• DB: 26 dB
• Power Dissipation: 80W

Features:

• High output power capability: 4 x 45W / 4 ohm max, 4 x 26W / 4 ohm @ 14.4V, 1kHz, 10%
• Low distortion
• Low output noise
• Standby function
• Mute function
• Auto mute at minimum supply voltage detection
• Weight: 7.1g

Package Includes: 1x TDA7388 IC Power Amplifier Chip

The LA4440 Stereo Amplifier IC is a versatile component designed for high-quality audio performance in both mono and stereo modes. Key features include:

• Built-in two channels for Mono and Stereo
• Dual mode: 6W x 2 and Bridge mode: 19W
• 46 dB Ripple rejection
• Maximum power handling: 18V, typical: 12V
• Good channel separation and low distortion
• Built-in Audio Muting function and Pin-to-Pin protection
• Surge protection circuitry

Presenting the CD4023 Triple 3-Input NAND Gate IC, a versatile and reliable component for your electronic projects. This integrated circuit is designed to perform the logic NAND function with three inputs, making it an essential part for complex digital circuits. Key features include:

• Triple 3-Input NAND Gate configuration
• Wide operating voltage range: 3V to 15V
• Low power consumption and high noise immunity
• Standard pin-out for easy integration
• Compact DIP-14 package

LM311 Voltage Comparator

The LM311 is a versatile voltage comparator with low input currents, designed for a wide range of supply voltages. Key features include:

• Low input currents
• Operates over a wide range of supply voltages
• Compatible with ±15V operational amplifier supplies
• Single +5V supply for IC logic

• Multifunction capability for versatile use in different applications.
• Mutually exclusive outputs for more efficient circuit design.
• Demultiplexing capability for handling multiple signal channels.
• Input clamp diodes to limit high-speed termination effects.

The CD4070 is a quad Exclusive-OR (EX-OR) gate integrated circuit (IC) designed for a wide range of digital logic applications. Each IC contains four independent EX-OR gates, making it an essential component for systems requiring logical comparisons, parity checkers, and more. Manufactured by Harris, this IC belongs to the standard 'B' series CMOS family, delivering reliable performance across a variety of voltage levels and environmental conditions.

• Supports Binary-Coded Decimal (BCD) counting with up and down directions.
• High-speed operation with a count rate of up to 35 MHz.
• Synchronous operation for precise and reliable performance.
• Wide operating voltage range from 2V to 6V.

The MOC3052 Triac Driver IC is designed for high-current control applications, featuring a GaAs infrared emitting diode optically coupled to a non-zero-crossing silicon bilateral AC switch (triac). Ideal for random phase control of high current triacs or thyristors in Bangladesh.

Key Features:

• High isolation voltage
• Random phase control
• High current handling capability
• 6-Pin DIP package
• Enhanced static dv/dt capability