LM3914 LED Bar Graph Display Driver is ideal for creating visual displays for various applications. It accurately displays an analog signal in a bar graph format, making it perfect for meters and indicators.

• Packaged Volume: 0.0025L
• Packaged Weight: 0.0025kg
• Packaged Length: 2.5cm
• Packaged Width: 1cm
• Packaged Height: 1cm

Reliable and precise for various display applications.

• 3-STATE version of 74LS153 with the same pinout.
• Schottky-diode-clamped transistors.
• Allows multiplexing from N-lines to one line.
• Performs parallel-to-serial conversion.

Discover the Juried Engineering TL081CP High Slew Rate JFET-Input Op-Amp, the perfect addition to your electronic projects. This breadboard-friendly DIP-8 operational amplifier offers low power consumption with high slew rates and low input bias. Key features include:

• Low Power Op-Amp with High Slew Rates, Low Input Bias and Offset Currents
• Input Offset Voltage: 3 mV
• Input Offset Current: 5 pA
• Input Bias Current: 30 pA
• Common Mode Rejection: 86 dB
• Supply Current: 1.4 mA per amplifier
• Supply Voltage: ±3V to ±15V

• Supply Voltage: Operates between 10V to 22V.
• Fixed Voltage Gain: Gain is fixed at 50.
• High Peak Current Capability: Supports up to 1.3A.
• High Input Impedance: 150kΩ for better signal handling.

• Low Voltage Operation: Supports 2.7V to 5.5V (Standard Voltage) and 1.8V to 3.6V (Low Voltage)
• Memory Size: 256K bits, organized as 16,384 x 8 or 32,768 x 8
• Data Transfer: Two-wire serial interface for easy integration

• Noise Suppression: Schmitt Trigger, filtered inputs to reduce noise

The CD4046 IC is a versatile CMOS micropower phase-locked loop (PLL) designed for a wide range of applications. Key features include:

• Low-power, linear voltage-controlled oscillator (VCO)
• Two different phase comparators with common signal-input amplifier
• 5.2-V zener diode for supply regulation
• Available in various 16-lead packages

Perfect for FM demodulation, frequency synthesis, and more.

The 4N25 Optoisolator is a high-quality component designed for electrical isolation and efficient signal transmission. Featuring a 6-pin configuration, it provides robust performance with a voltage isolation of 7500Vpk and a current transfer ratio of at least 20% at 10mA. Ideal for through hole mounting.

Key Features:

• Category: Isolators
• Family: Optoisolators - Transistor, Photovoltaic Output
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 7500Vpk
• Current Transfer Ratio (Min): 20% @ 10mA
• Voltage - Output: 30V
• Current - DC Forward (If): 60mA
• Vce Saturation (Max): 500mV
• Output Type: Transistor with Base
• Mounting Type: Through Hole
• Package / Case: 6-DIP (0.300", 7.62mm)

100% Brand New and High Quality

• High Power Output – 68W into 4Ω at ±28V, 38W into 8Ω at ±28V, and 50W into 8Ω at ±35V
• 135W Peak Output Power capability
• High Signal-to-Noise Ratio (≥ 92dB) for clear sound
• Built-in Output Protection from short circuits and voltage spikes

Key Features:

• 16A current rating
• 35mA gate trigger current
• 600V off-state voltage rating
• Snubberless design
• Available in D2PAK package

• Voltage regulator for stable power supply
• Available for 12V and 24V input options
• 5W dissipation power
• Wide operating temperature range of 25°C to 75°C

• 14-bit binary counter/divider.
• Wide operating voltage range (3V to 18V).
• High clock frequency capability (up to 30MHz at 15V).
• Fast reset propagation delay of 25ns at 5V.

• 8-bit AVR core running at up to 20MHz
• 4KB Flash memory, 256B EEPROM, and 256B SRAM
• 6 I/O pins with multiple functions
• Integrated 4-channel 10-bit ADC for precise analog readings

• Quad 2-input XOR gate with open-collector outputs
• Operates at a supply voltage of up to 5.25V
• Supports both high and low-level input voltages
• Maximum low-level output current of 8mA

The LM 7805 Voltage Regulator is a reliable component for providing a stable 5V output in various electronic circuits. Ideal for projects requiring consistent voltage regulation.

• Logic Type: Decade Counter
• Direction: Up
• Number of Elements: 1
• Number of Bits per Element: 4