Key Features:

• Part NO.: M74HC161B1R
• Package: 16-DIP
• Logic Type: Binary Counter
• Direction: Up
• Number of Elements: 1
• Number of Bits per Element: 4
• Reset: Asynchronous
• Timing: Synchronous
• Count Rate: 62MHz
• Trigger Type: Positive Edge
• Voltage Supply: 2 V ~ 6 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Supplier Device Package: 16-DIP

• Output Voltage: 1.8V
• Output Current: 1A
• Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

The 2W08 2A 800V Bridge Rectifier is designed to convert AC input into DC output efficiently. With its configuration of four diodes, it provides the same output polarity for either input polarity, offering reliable full-wave rectification.

• Forward Current: 2A
• Reverse Voltage: 800V
• High Efficiency: Ensures optimal performance and lower power loss

The 74HC02 / 74LS02 / 7402 are quad 2-input NOR gate ICs housed in a DIP-14 package. These high-speed devices offer low input and quiescent supply currents, high output current capability, and a wide operating voltage range, making them ideal for various digital logic applications.

The 7495 / 74HC95 / 74LS95 is a high-speed CMOS 8-bit shift register with integrated output latches and 3-state outputs, designed for use in various digital and logic control applications. This IC is fabricated using advanced silicon gate C2MOS technology, offering fast operation, efficient power management, and protection against static discharge and voltage transients. With its dual clocking system and ability to cascade, it is ideal for data storage, transfer, and serial-to-parallel conversion tasks.

• Controller Family/Series: AVR MEGA
• Core Size: 8-bit for efficient processing
• I/O Pins: 23 pins for versatile interfacing

The IC Base 8-Pin is a high-quality socket designed for integrated circuits. This IC base features a row-to-row distance of 7.62mm, a pin pitch of 2.54mm, and a pin length of 4mm. Its compact dimensions of 10.5mm (L) x 10mm (W) x 5mm (H) make it perfect for various electronic projects and applications.

• Row to Row Distance: 7.62mm
• Number of Pins: 8
• Pin Pitch: 2.54mm
• Pin Length: 4mm
• Dimensions: 10.5mm (L) x 10mm (W) x 5mm (H)

• Wide Supply Range: Operates from ±5-V to ±18-V supplies.
• Fast Acquisition Time: Less than 10-µs acquisition time.
• TTL/CMOS Compatible: Logic input is compatible with TTL, PMOS, CMOS.
• Low Hold Step: 0.5-mV typical hold step at Ch = 0.01 µF.

• Adjustable output voltage
• Wide input voltage range (up to 45V)
• Stable and efficient step-down voltage conversion
• Overvoltage and overload protection

• Wide supply voltage range (4V to 36V) for versatile use.
• High output current per channel (40mA).
• Gain Bandwidth Product (GBP) of 4.5 MHz for efficient signal processing.
• Slew rate of 9 V/us for fast response times.

Discover the TOSHIBA TTC5200 TRANSISTOR, an NPN power transistor ideal for high-voltage audio applications. Operating at 230V and 15A, this TO3PL package transistor is perfect for power amplification in audio systems.

Discover the Juried Engineering TL081CP High Slew Rate JFET-Input Op-Amp, the perfect addition to your electronic projects. This breadboard-friendly DIP-8 operational amplifier offers low power consumption with high slew rates and low input bias. Key features include:

• Low Power Op-Amp with High Slew Rates, Low Input Bias and Offset Currents
• Input Offset Voltage: 3 mV
• Input Offset Current: 5 pA
• Input Bias Current: 30 pA
• Common Mode Rejection: 86 dB
• Supply Current: 1.4 mA per amplifier
• Supply Voltage: ±3V to ±15V

• Active product status for reliable application
• NAND Gate logic type with 2 circuits
• 4 input channels per circuit
• Wide supply voltage range: 3V to 18V

The 74LS00 / 7400 / 74HC00 are quad 2-input NAND gate ICs housed in a 14-pin DIP package. These logic gates are designed for high-speed operation with a supply voltage range of 2V to 6V and an output current of 5.2mA. They are ideal for various digital logic applications.

LM358 Op-Amp (Through-Hole)

The LM358 is a low-power dual operational amplifier with high efficiency and reliability. It features two internally compensated op-amps, making it ideal for a wide range of applications. Key features include:

• Two internally compensated op-amps
• Large DC voltage gain: 100 dB
• Wide bandwidth (unity gain): 1 MHz (temperature compensated)
• Wide power supply range: Single supply 3V to 32V, or dual supplies +/-1.5V to +/-16V

• Quad 2-input XNOR gates for digital logic applications
• DIP-14 package, easy to integrate into PCBs
• Wide operating voltage range (2V - 6V)
• Low power consumption, max 2µA quiescent current