• 2K Memory, 256 x 8 bits or 128 x 16 bits
• Three-Wire Serial Interface
• Self-Timed ERASE and WRITE Cycles

The SOLID STATE KBPC3510 Bridge Rectifier Diode offers high performance for power supply circuits. Key features include:

• No. of Phases: Single
• Repetitive Reverse Voltage Vrrm Max: 1kV
• Forward Current If (AV): 35A
• Bridge Rectifier Case Style: Module
• No. of Pins: 4Pins
• Operating Temperature Max: 125°C
• Packaging: Each

• Wide Supply Range: Operates from ±5-V to ±18-V supplies.
• Fast Acquisition Time: Less than 10-µs acquisition time.
• TTL/CMOS Compatible: Logic input is compatible with TTL, PMOS, CMOS.
• Low Hold Step: 0.5-mV typical hold step at Ch = 0.01 µF.

The 74LS157 is a high-speed Quad 2-Input Multiplexer IC, designed for use in data selection and signal routing in digital circuits. Each IC contains four independent 2-to-1 multiplexers, allowing the selection of one of two data inputs per channel. This versatile multiplexer supports a single supply voltage, making it ideal for various logic and switching applications. The device is available in a DIP16 package, ensuring compatibility with standard through-hole mounting designs.

The NE/SE 556 IC is a versatile phase-locked loop (PLL) integrated circuit that operates over a frequency range of 0.1 Hz to 500 kHz. Known for its highly stable center frequency, this IC achieves very linear FM detection. The VCO output produces TTL-compatible square waves, making it suitable for a variety of applications. The dual supply ranges from ±6V to ±12V, and it can also be operated from a single supply of 12V to 24V.

Key Features:

• Frequency range: 0.1 Hz to 500 kHz
• Highly stable center frequency
• Linear FM detection
• TTL-compatible square wave output from VCO
• Dual supply range: ±6V to ±12V
• Single supply range: 12V to 24V

Product Overview: The Gravity Analog TDS Sensor Module SEN0244 is designed to measure the Total Dissolved Solids (TDS) in water, providing reliable data on water quality, solubility, and conductivity.

Key Features:

• Input Voltage: 3.3~5.5V
• Output Signal: 0~2.3V
• Working Current: 3~6mA
• TDS Measurement Range: 0~1000ppm
• TDS Measurement Accuracy: +/- 10% F.S. at 25°C
• Module Interface: PH2.0-3P
• Electrode Interface: XH2.54-2P
• Probe Number: 2
• Overall Length: 83cm
• Connection Interface: XH2.54-2P
• Color: Black
• Material: Plastic
• Size: 4.3x3.3cm

Key Features of AUPO Square Thermal Fuse 135°C, 2A 250V

• High-temperature rating: 135°C
• Current capacity: 2A
• Voltage rating: 250V
• Reliable AUPO brand
• Compact square design

The 74HC02 / 74LS02 / 7402 are quad 2-input NOR gate ICs housed in a DIP-14 package. These high-speed devices offer low input and quiescent supply currents, high output current capability, and a wide operating voltage range, making them ideal for various digital logic applications.

Specifications:

• Technology: Si    
• Mounting Style: SMD/SMT    
• Package/Case: TO-263-7    
• Transistor Polarity: N-Channel    
• Number of Channels:1 Channel    
• Vds - Drain-Source Breakdown Voltage: 30 V    
• Id - Continuous Drain Current:180 A    
• Rds On - Drain-Source Resistance: 1.05 mOhms    
• Vgs - Gate-Source Voltage: - 16 V, + 16 V    
• Vgs th - Gate-Source Threshold Voltage: 1.5 V    
• Qg - Gate Charge: 187 nC    
• Minimum Operating Temperature: - 55 C    
• Maximum Operating Temperature: + 175 C    
• Pd - Power Dissipation: 188 W    
• Channel Mode:Enhancement    
• Qualification: AEC-Q101    
• Tradename: OptiMOS    
• Series: OptiMOS-T2    
• Packaging: Reel    
• Height: 4.4 mm    
• Length:10 mm    
• Product Type:  MOSFET   
• Rise Time: 5 ns    

Package:

1x 4N03L01 IPB180N03S4L-01 TO-263-7 30V 180A SMD Triode

• 16K Memory, 2k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

• High precision and stability timing capability
• Operates in Astable and Monostable modes
• Wide range of operating voltages up to 18V
• TTL-compatible output for easy integration

• Provides a stable +10V output voltage
• Current output: 1A
• Ideal for power supply applications
• Easy to use with TO-220 package

• Low Voltage and Standard-Voltage Operation
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression

Product Overview: The 74139/74HC139/74LS139 Dual 2-4 Line Decoder/Demux IC is a high-efficiency integrated circuit designed for decoding and demultiplexing applications in digital systems.

Key Features:

• Type: Decoder/Demultiplexer
• Circuit: 1 x 2:4
• Independent Circuits: 2
• Current - Output High, Low: 5.2mA, 5.2mA
• Voltage Supply: 2 V ~ 6 V
• Operating Temperature: -55°C ~ 125°C
• Package: 16-PDIP
• Mounting Type: Through Hole
• Supplier: SICSTOCK

The KBP206 Bridge Rectifier Diode is a reliable component designed for efficient rectification in electronic circuits. With a peak reverse voltage of 600V and a forward voltage of 1.1V, it ensures stable performance. This diode is ideal for single-phase bridge rectifier applications and comes in a SIP package with 4 pins.

Key Features:

• Part NO.: KBP206
• Package: SIP
• Peak Reverse Voltage: 600V
• Forward Voltage: 1.1V
• Max Surge Current: 65A
• Mounting Type: Through Hole
• Number of Pins: 4

• Wide supply voltage range (4V to 36V) for versatile use.
• High output current per channel (40mA).
• Gain Bandwidth Product (GBP) of 4.5 MHz for efficient signal processing.
• Slew rate of 9 V/us for fast response times.