• 4K Memory, 512 x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

• 4-Bit Magnitude Comparator for digital applications.
• Cascadable Design for comparing larger bit values.
• High-Speed Operation with LS (Low Power Schottky) technology.
• TTL Compatible with standard logic circuits.

The IC Base 16-Pin is a high-quality socket designed for integrated circuits. This IC base features a row-to-row distance of 7.62mm, a pin pitch of 2.54mm, and a pin length of 4mm. Its compact dimensions of 20.5mm (L) x 10mm (W) x 5mm (H) make it perfect for various electronic projects and applications.

• Row to Row Distance: 7.62mm
• Number of Pins: 16
• Pin Pitch: 2.54mm
• Pin Length: 4mm
• Dimensions: 20.5mm (L) x 10mm (W) x 5mm (H)

• 13-Input NAND Gate with TTL logic compatibility.
• Low Power Consumption with LS (Low Power Schottky) technology.
• Fast Switching Time, ensuring high-speed logic operations.
• High Noise Immunity, making it reliable for digital circuits.

The Microchip ATmega 88 is a high-performance 8-bit AVR RISC-based microcontroller featuring:

• 8KB ISP flash memory with read-while-write capabilities
• 512B EEPROM and 1KB SRAM
• 23 general-purpose I/O lines and 32 general-purpose working registers
• Three flexible timer/counters with compare modes
• Internal and external interrupts
• Serial programmable USART, byte-oriented 2-wire serial interface, SPI serial port
• 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages)
• Programmable watchdog timer with internal oscillator
• Five software-selectable power-saving modes

Operating voltage: 2.7-5.5 volts. Achieves throughputs approaching 1 MIPS per MHz.

• Decade counter functionality
• 16-pin DIP package
• Fast switching times

The IC Base 18-Pin Socket Connector offers reliable connectivity and secure placement for integrated circuits. Ideal for various electronic projects, it features a robust design and precise pin alignment.

The LM 7805 Voltage Regulator is a reliable component for providing a stable 5V output in various electronic circuits. Ideal for projects requiring consistent voltage regulation.

The MOC3021 6-Pin Triac OptoIsolator is a reliable component designed for interfacing electronic controls with power triacs. Featuring a zero-crossing triac driver, it ensures smooth and efficient control of resistive and inductive loads.

Key Features:

• Type: Forward voltage: 1.2V
• Type: Forward current: 10mA
• Type: Max. Forward voltage: 1.5V
• Type: Max. Forward current: 50mA
• Housing: DIP-6

• Supports Binary-Coded Decimal (BCD) counting with up and down directions.
• High-speed operation with a count rate of up to 35 MHz.
• Synchronous operation for precise and reliable performance.
• Wide operating voltage range from 2V to 6V.

The LM324 is a versatile quad operational amplifier consisting of four independent, high-gain, internally frequency-compensated op-amps. These op-amps are designed to operate from a single power supply over a wide range of voltages, making them suitable for various applications. They can also operate from split power supplies, and the low power supply current drain is independent of the magnitude of the power supply voltage.

• Output current up to 1.5 A
• Output voltage of 10 V
• Thermal overload protection
• Short circuit protection

The Versatile CD4016 Quad Bilateral Switch is engineered for effective multiplexing. It operates efficiently within a voltage range of 3V to 18V and can handle a maximum switching voltage of 20V. Perfect for a variety of electronic applications, it offers reliable performance and flexibility.

• Operating Voltage: 3V to 18V
• Switching Voltage: 20V (max)
• On-state Resistance: 200Ω (at 15V Vcc and 10kΩ Load)
• Output current High: -0.4mA
• Low Level Control pin Voltage: 0.9V (max)
• High Level Control pin Voltage: 11V (min @ 15V Vcc)
• Available in 14-pin PDIP, GDIP, PDSO packages

The TDA7294 Amplifier IC is a versatile and high-performance DMOS power stage amplifier, capable of delivering up to 100W of music power. Key features include a very high operating voltage range, efficient muting/stand-by functions, and low noise and distortion, making it an ideal choice for audio enthusiasts. Highlights:

• High output power (up to 100W music power)
• Muting/stand-by functions
• No switch on/off noise
• Very low distortion and noise
• Short circuit protection
• Thermal shutdown

The HT12E is a 12-bit encoder IC from the 212 series, designed for interfacing with RF and infrared circuits. It operates within a supply voltage range of 0.3V to 13V and features robust performance across a wide temperature range, making it ideal for remote control and security applications.