The KBPC610 IR 1~ Rectifier Bridge 6A 1000V is a robust and reliable solution for converting AC to DC in various industrial and consumer equipment. This single-phase bridge rectifier, consisting of four diodes in a full bridge configuration, ensures efficient and compact performance.

• Single phase encapsulated bridge rectifier
• Maximum Recurrent Peak Reverse Voltage (Vrrm): 1000V
• Average Forward Current (Itav): 6A
• Maximum Forward Surge Current (Ifsm): 125A @ 50Hz
• Package: D-72

• 2K Memory, 256 x 8 bits
• Two-Wire Serial Interface
• Write Protect Pin for Hardware Data Protection

• Type of Integrated Circuit: PMIC (Power Management IC)
• Kind of Integrated Circuit: PWM Controller
• Output Current: 0.5A
• Frequency: 1MHz

The TDA2002 8W Hi-Fi Audio Power Amplifier is designed for high-quality sound in various audio applications. Key features include:

• Class B audio power amplifier
• Up to 8W Output Power
• Low harmonic and crossover distortion
• Short-circuit protection
• Thermal shutdown
• Overvoltage protection
• Low impedance drive (as low as 1.6 ohms)
• High reliability

• 4K Memory, 512 x 8 bits
• Two-Wire Serial Interface
• Write Protect Pin for Hardware Data Protection
• Wide Supply Voltage 2.7V to 5.5V

• Contains a divide-by-two section and a divide-by-eight section
• Sections can be combined to form BCD, modulo-12, or modulo-16 counters
• Low power dissipation
• Operating temperature up to 70°C

TDA2009 Amplifier Stereo 10W High Bridge 28 Watts

The TDA2009 is a powerful stereo amplifier with high bridge configuration, delivering up to 28W of audio power. Designed for high-quality audio applications, it features a wide range of power supply options and impressive performance metrics. Key features include:

• DC power supply: 8V to 24V at 1A to 2A
• Output power rates:
  • 10W RMS/channel, 4 ohms load, 24V DC power supply
  • 6W RMS/channel, 8 ohms load, 24V DC power supply
  • 4W RMS/channel, 4 ohms load, 12V DC power supply
• S/N ratio: more than 75 dBA at 10W output
• Frequency response: 10Hz to 50kHz (-3dB)
• Distortion: 0.351% at 1kHz
• Gain: 36dB
• Input: 100mV for full output

• Six independent hex buffer gates
• Open collector outputs require pull-up resistors
• Open collector type suitable for indicator lamps and relays
• Input clamping diodes

• Operates at high voltage up to 20V.
• Combines both counter and decoding functions in a single IC.
• Ideal for low power displays.

The LM393 Dual Differential Comparator is designed for precision voltage comparison applications. It accepts two inputs for comparison, determining which voltage is higher. Key features include:

• Dual differential comparator
• Accurately compares two voltage inputs
• Exploits the principle of voltage comparison

• C Compiler Optimized Architecture for re-entrant code
• 32KB Flash Program Memory and 2KB RAM
• Self-programming under software control
• Enhanced A/D Converter with up to 13 channels

The 4N25 Optoisolator is a high-quality component designed for electrical isolation and efficient signal transmission. Featuring a 6-pin configuration, it provides robust performance with a voltage isolation of 7500Vpk and a current transfer ratio of at least 20% at 10mA. Ideal for through hole mounting.

Key Features:

• Category: Isolators
• Family: Optoisolators - Transistor, Photovoltaic Output
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 7500Vpk
• Current Transfer Ratio (Min): 20% @ 10mA
• Voltage - Output: 30V
• Current - DC Forward (If): 60mA
• Vce Saturation (Max): 500mV
• Output Type: Transistor with Base
• Mounting Type: Through Hole
• Package / Case: 6-DIP (0.300", 7.62mm)

100% Brand New and High Quality

• 32-Pin Package: Compact design with 32 pins for flexible integration.
• High Memory Capacity: 32KB Flash, 2KB SRAM, and 1KB EEPROM.
• Multiple I/O Lines: 23 General-purpose I/O lines for versatile connectivity.
• Analog and Digital Processing: 10-bit ADC with 8 channels for accurate analog signal processing.

The STK4192 II 2-Channel 50W AF Power Amplifier, an original piece, delivers superior audio amplification for both home and professional settings. Its robust construction ensures high fidelity and durability.

• High Output Power:
  • Stereo Mode: 2.3W (Typ) at 9V, 4Ω Load
  • Bridge Mode: 4.7W (Typ) at 9V, 8Ω Load
• Low switching distortion at high frequencies
• Built-in muting circuit minimizes power on/off noise

Discover the ENC28J60 Ethernet Controller, a standalone device from Microchip Technology Inc. designed for seamless Ethernet network interfacing with microcontrollers via SPI. It operates within a voltage range of 3.1V to 3.6V and supports data rates up to 10 Mbit/s, making it ideal for various projects in Bangladesh.